Construction of laundry shade, replacement of roof gutter facia outside of kitchen store, Conference Hall and renovation of toilet of Room No. 200 at Hotel Pinewood, Barog Distt. Solan (H.P)

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc., and including stacking of serviceable materials in specified manners and disposal of unserviceable materials as per the direction of Engineer-In-Charge of G.I. Sheet including carriage of materials within all leads, lifts and heights.

Dismantling tile work in floors and roofs laid in cement mortar including stacking the useful material in specified manners as per the direction of Engineer-In-Charge and disposal of unserviceable materials in all leads and lifts. For thickness of tiles 10mm to 25 mm

Demolishing cement concrete manually/ by mechanical means including stacking the useful material in specified manners as per the direction of Engineer-In-Charge and disposal of unserviceable materials in all leads and lifts. Nominal concrete 1:4:8 or leaner mix (including equivalent design mix).

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Excavation work of all kind of soil by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils within all lead and lifts as per the diretion of Engineer in Charge at site.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing Granite work edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge including carriage of materials within all leads, lifts and heights.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using flats 30x6mm for diagonal braces and central cross piece as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 600X300 mm Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete Kajaria/Nitco/RAK or equivalent make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and laying Ceramic glazed floor tiles of size 450x450 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete Kajaria/Nitco/RAK or equivalent make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing corrugated G.S. sheet Tata make or equivalent roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m² as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with Sand, including finishing smooth etc. complete as per direction of Engineer-in-charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 15 cm wide, 45 cm overall semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 0.63 mm thick with zinc coating not less than 275 gm/m² as per the diretion of Engineer in Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing MS rolled cold B.P. sheet 1.66 mm to 2 mm thick in eaves boards Facia/ soffits/ceilings including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto 12 meters heights as per instruction of Engineer-In-Charge (base member of steel work should be measured and paid separetely) including carriage of materials within all leads, lifts and heights.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Wall painting one or more coats on old work with plastic emulsion paint of approved brand and manufacture to give an even shade as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights.

Providing and fixing 20 mm nominal outer dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked (heavy duty) including fixing with approved adhesive etc. complete. 110 mm dia. (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75 mm dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked (heavy duty) complete including fixing with approved adhesive etc. complete (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 110 mm dia.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked (heavy duty) complete including fixing with approved adhesive etc. complete (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75 mm dia.

Providing and fixing PVC plain bend ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 110 mm dia.

Providing and fixing PVC plain bend ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 75 mm dia.

Providing and fixing PVC collers ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. . 110 mm dia.

Providing and fixing PVC collers ISI marked (heavy duty) including fixing with approved adhesive etc. complete (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75 mm dia.

Providing & fixing vitreous Snow White colour rimless Single piece water closet with UF soft close slim seat cover, hinges, fixing accessories, accessories set and cistern fittings of Jaqaur make S Trap Cat No. ONS-WHT-10853S300UFSM or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing vitreous Snow white colour Jaquar make Cat No. CNS-WHT-801, CNS-WHT-301 having size 560x 415x200mm or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing C.P brass wall mixer with over head shower and bath head pipe Jaguar make Cat No.CON-167KNB or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing C.P over head shower Jaguar make Cat No.OHS-1619 or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing C.P brass shower arm for wall mounted shower Jaguar make Cat No.SHA-455L400 or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing C.P brass single lever basin mixer Jaguar make (Continental) Cat No.CON-321KNB or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP brass Bib cock (Short body) of Jaguar Make Cat No. CON-047KN or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing C.P brass angle valve 15 mm Dia Jaguar make (Continental) Cat No.CON-059KN or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP brass towel rack 600mm long with lower hangers of Jaguar make Cat No. CAN-1181S or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP brass towel rail 600mm long of Jaguar make Cat No. AKP-35711PS or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP brass towel ring of Jaguar make Cat No. AKP-35721P or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP brass soap dish of Jaguar make Cat No. ACN-1131N or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP brass toilet paper holder of Jaguar make Cat No. ACN-1151N or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP brass robe hook of Jaguar make Cat No. AKP-35761P or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing C.P. brass bottle trap 32 mm Dia with 250mm and 190mm long wall connection pipes and wall flange for wash basin and sink including carriage of materials in all lead and lifts, Jaguar make Cat No.ALD-769L300x190 or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing C.P waste coupling Jaguar make Cat No.ALD-705 or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP grating 100mm Dia Chilly make including cutting floor tile and fixing with white cement mixed with pigment matching with shade of floor tiles as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CP health faucet (Heavy duty) with flexible pipe of Jaguar make Cat No. ALD-573or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing PVC long braided hose with two 15mm nuts & rubber washers without nipple connection pipe of 450 mm length of Jaguar make Cat No. ALD-805B or equivalent series of Jal/Kerovit/Cera make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing CPVC gate valve 20mm outer Dia (Avg) of Finolex make as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and fixing PVC floor trap complete (Finolex/ Supreme/ Vectus or equivalent make) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. 75mm dia

Providing and fixing 5mm thick ornamental looking mirror of Modi Guard/Saint Gobian/Atul Company grinding complete fixed with necessary clamps as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Make:- FRLS Wire- Havell's, KEI, Finolix. PVC Conduit-Diplast, AKG, RKG, Anchor Accessories- Havell's(Athena), Legrand(Arteor), L&T(Entice) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. Group A

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Make:- FRLS Wire- Havell's, KEI, Finolix. PVC Conduit-Diplast, AKG, RKG, Anchor Accessories- Havell's(Athena), Legrand(Arteor), L&T(Entice) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Make:-Havell's(Athena), Legrand(Arteor), L&T(Entice) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).Make:-Havell's(Athena), Legrand(Arteor), L&T(Entice) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Make:-Havell's(Athena), Legrand(Arteor), L&T(Entice) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make:- FRLS Wire- Havell's, KEI, Finolix. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way , Double door. Make:-Havell's, ABB, Legrand, L&T, Schneider as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

8 way , Double door

12 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:-Havell's, Legrand, ABB, L&T, Schneider as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights. A) Single pole

Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required. 40 A DP. Make:-Havell's, Legrand, ABB, L&T, Schneider as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes with 8 bar pressure rating Five star BEE rating and safety valve installation by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:- 35 Liter capacity water heater 5 Star Rating (Cat-A) Make:-Havell's, Jaguar, Racold as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make:- Havell's Orient, Bajaj Domestic type. Exhaust Fan, Light duty, (Domestic) 150 mm sweep as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make:- Havell's Orient, BajajHeavy Duty type.Exhaust Fan, Heavy duty, 450 mm sweep (900rpm) as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

Providing and installation of following type of Surface mounting round type LED Downlight with polycarbonate housing ,anti glare polycarbonate diffuser,surge protection 2.5 KV luminaire efficacy > 85lm/Watt with minimum 25000 burning hours,THD<15% in white finish and seprated energy efficient constant current, non-integral, electronic driver relevent LM 79/80 complaince from UN/NABL Lab; suitable for input voltage: AC 140-270 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make:- bajaj, Havell's, Philips, Panasonic. Round LED Down Light 12W Surface as per the direction of Engineer-In-Charge including carriage of materials in all leads, lifts and heights.

SHASHANK KUMAR (BID ID -560111)