OT-01

Amount

Supplying and fixing in position of Anodized Colour coated Aluminium framed partition partly paneled and partly glazed with frost glass Aluminium framed partition of approved quality as detailed below and as directed by the Engineer at site including supply and fixing the Aluminium Partition in position, cost of aluminium beading, rubber beading, cleat angle and all materials, Labour charges, lead, lift etc.complete. i) Vertical and Horizontal posts - Colour coated Anodized Aluminium Board or its equivalent grade board of 12mm thick both sides laminated section 63x38mm of thickness 2.45mm, country wood filled al-round, verticals @ spacing of 900mm c/c (max)and horizontal @ 0m, 0.90 m and 2.10 m (max). ii) MDF Board or its equivalent grade board of 12mm thick both sides laminated for a height of 900mm from floor level. iii) 5mm thick frost glass for the height from 900mm to 2100mm. iv) Colour coated anodized Aluminium beading of weight not less than 0.12kg/m on both sides of the shutter.

Supplying and fixing in position of Anodized Colour coated Aluminium framed partition partly paneled and partly glazed with frost glass Aluminium framed partition of approved quality as detailed below and as directed by the Engineer at site including supply and fixing the Aluminium Partition in position, cost of aluminium beading, rubber beading, cleat angle and all materials, Labour charges, lead, lift etc.complete. i) Vertical and Horizontal posts - Colour coated Anodized Aluminium Board or its equivalent grade board of 12mm thick both sides laminated section 63x38mm of thickness 2.45mm, country wood filled al-round, verticals @ spacing of 900mm c/c (max)and horizontal @ 0m, 0.90 m and 2.10 m (max). ii) MDF Board or its equivalent grade board of 12mm thick both sides laminated for a height of 900mm from floor level. iii) 5mm thick frost glass for the height from 900mm to 2100mm. iv) Colour coated anodized Aluminium beading of weight not less than 0.12kg/m on both sides of the shutter.

Providing two coats of Plastic emulsion paint of approved quality and colour over one coat of primer to the wall surfaces as directed by the Engineer at site, including cost of all materials, labour charges, scaffolding charges, lead, lift etc., complete.

Clearing the scrub & light jungle and disposing the debris to suitable place away from the site as directed by the engineer at site including all labour charges, hire charges for vehicle, tools and plants required, leads & lifts etc., complete.

Removing the roots of jungle and other plants with uprooting, and stacking at one point near by carefully using JCB and disposing off as directed by the Engineer at site, including cost of labour charges, loading, unloading lead, lift, hire charges of T&P's etc., Complete.

Cleaning the Septic tank and manholes completely by pumping out sewage and disposing the same to outside the MTPS-II premises including labour charges for cleaning, removing manhole covers and refixing the same in position after cleaning, transportation charges, leads & lifts etc., complete.

Removal of silt, slush, and other waste materials etc. from the open drain and depositing on bank with lead of 10M & lift of 2M and disposing away fom the site as directed by the Engineer at site using vechicle with a lead of 3Kms including labour charges, hire charges for T&P, loading, unloading, all leads, lifts etc., complete.

Kuppusamy and Co