Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC 137 MODEL TOWN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹40.9 L+₹2.3 L (5.98%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹41.3 L+₹2.7 L (7.00%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹41.4 L+₹2.8 L (7.36%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹41.5 L+₹2.9 L (7.64%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
28 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N) Mamun
Garrison Engineer(N) Mamun Pin-145001
PROVN OF CERTAIN SANCTIONED WORK ( MINOR AND REVENUE WORKS) UNDER AGE B/R-I AND AGE B/R-II OF GE(N) MAMUN
2022_MES_557837_2
GE(N)/M-33/2022-23
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N) Mamun
₹84,000
17 Dec 2022
9 Nov 2022
30 Nov 2022
9 Nov 2022
28 Nov 2022
16 Nov 2022
Amount
Surface excavation in any type of soil not exceeding 30 cm deep and averaging 20cm deep and getting out in any type of Soil all as specified and directed.
Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for rolling and consolidating formation surfaces in cutting by hand roller of 02 to 0.5 tonnes all as specified and directed.
M&L 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded crushed stone aggregate) in Sub -base,floor and pavings etc complete all as specified and directed.
M&L 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded crushed stone aggregate) in Sub -base,floor and pavings etc complete all as specified and directed.
M & L for PCC 1:2:4 Type B1 (using 20 mm graded crushed aggregate) as in apron/ramp ,cills, steps; copings, kneelers, apex stones, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
S&F of machine pressed precast conctete natural coloured epoxy coated interlocking tile of approved shade paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including joint filling with gray cement and pigment to match the shade complete all as specified and directed.
S&F of machine pressed precast conctete coloured interlocking paver block of any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade including joint filling with gray cement and pigment to match the shade complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for cement concrete 1:3:6 type C1(using 20mm graded stone aggregate) as in surface channel and drains complete all as specified and directed
M&L for forming fair finished drain or channel any inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required incl excavation in any type of soil for laying upto 25cm depth and removal of soil and PCC 1:3:6 using 20mm graded stone aggregate for leveling of base and filling of where required all as specified and directed.
M & L for applying Two coats of premium acrylic emulsion paint and UV resistance , Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives over and including one priming coat of exterior primer applied over new surfaces incl kerb stones etc all as specified.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish out off the premises, etc complete all as specified and directed.
M & L for two coat of Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on new concrete surface complete all as specified and directed.
Excavating in trenches in any type of soil n.exc. 1.5 metre wide and n.exc 1.5 metre in depth and getting out any type of soil complete all as specified.
Returing,filling in (soil) including spreading levelling, watering and well ramming in layers not exc. 25 cm thick in any type of soil complete all as specified and directed.
M&L for PCC 1:4:8 (Nominal mix) using 40mm graded aggregate as in foundation mass concrete complete all as specified and directed.
M&L for Brick work with Fly Ash Brick (Non-Modular) straight or curved on plan exceeding 6m mean radius built in CM (1:6) etc complete all as specified and directed.
S&F form work to rough surface of concrete to edges of concrete flat ,slab,opening in conc RCC/PCC bands all exc 20cm wide and similar work complete all as specified.
M&L Rendering 15mm thick on bricks surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified.
Preparing new plastered surfaces of walls and applying two coats of cement base paint including preparation etc complete all as specified.
M &L Providing precast cement concrete type B0 louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and set in CM 1:4, complete all as specified.
Mild steel TMT steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less thn 0.9mm dia complete all as specified.
All as per Srl Item No.24 here-in-before but 8mm dia & over upto and including 10mm dia MS TMT bars as in stirrups, spacers, binders.
M&L for RCC 1:1.5:3 type A1 (using 20mm graded crushed stone aggregate) as in beams cantilevers bressummers lintels incl necessary formwork complete all as specifie and directed.
Excavating in post holes (or similar holes) each n-exc 0.50cum and getting out in loose /soft soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc 25cm, watering, and removing surplus soil to a distance nexc 50m and making good surface complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 using40mm graded stone aggregate in foundation/filling and mass concrete complete all as specified and directed.
M&L for Pre-painted galvalume 0.5mm thick high strength corrugated sheeting with aluminium zinc coating of an ecofriendly colour coating not less than 25 micron having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as required, etc complete all as specified and directed.
S&F steel work in tubular trusses including columns, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade st-240. complete all as specified and directed.
S&F plates (plain or chequered) channels .Fe-410-W(gde-E-250) quality B., square cut or notched (ordinary and counter sunk) forming holes, without any attachment including welding etc all as spfd and directed by EIC
S&F Mild steel as in posts and struts in fencing including cutting top to shape as direct, drilling holes, notiching for wire etc, flat iron fillet (for securing wire mash etc) incl all necessary drilling bolting or reveting,etc and similar work conforming to Fe410-0 or Fe-310-0 etc complete all as specified and directed.
S&F Mild steel screw bolt(machine made) with hexagonal or square heads at one end screwed the other or screwed both ends each screwed end to be fittedwith washers and one hexagonal or square nut n exc 5 cm long (5 to 10mm dia.) etc complete all as specified and directed.
Supply only chain link fencing of oblong wire mesh of any size and type etc complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire and fixing with MS angle iron fencing posts complete all as directed .
Applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.
S & F galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts incl securing or tying at crossing with and provn of galcanized mild steel wire staple or steel pins (Each line of wire to be measured).complete all as specified and directed.
S & f informatory sign board in required sizeand each sign board made of 2 mm thick alluminium composite panel both side face fully covered with 3M scotchlite brand intensity prismatic grade retro reflective sheeting as per ASTMD 4956 Type IV in required colour. The retro reflective sheet shall be processed on ACP by 3M equipment heat lamp vacum applicator and letters sign and symbol shall be out by computerised plotter or digital printed on retro reflective sheet with high quality eco solvent digital roland and fabricated out of high intensity prismativ grade sheeting with text matter(as required) and border of same sheeting sign board shall be supplied alongwith suppoted circular hollow stainless steel section frame of size 20mm dia 1.29 mm thick of grade 304 along with proper clamping with same section of stainless steel and nut bolts / welding outer size of board 1.2mx0.6 hollow section frame pipe 40 mm dia 1.29mm thick fo grade 304, board ht from ground level to top 3.0 m and necessary excavation,PCC (1:2:4) type B-1(450x450x600mm) and removal of excavated soil complete all as specified and directed
Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed
Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed
Supply and fixing solar road delineator 6 LED of colour red/yellow housed in an aluminium body LEDs solar cell battery and light sensor well projected inside polycobonate sheet diving protected with powder wire mesh cage system mounted over 47mm dia steel tube powder coated of lenght 600mm having sheet foot of 150x150 CRC 118mm gauge plate and PCC 1:2:4 type B-1 (20mm graded aggregate) embedded size 30x30x45cm including necessary earth work all as specified and directed.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers , PVC waste pipe fixed in repair including waste copling ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as spd & directed.
S&F 15mm bore bib taps fancy type with wall flange, chromium plated cast copper alloy long body with capstan heads, screwed for iron pipe or brass ferrule, etc complete all as specified and directed.
S&F GI water tubing surface/concealed, 15mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, etc complete all as specified and directed.
S&F framed work such as grills, gratings etc with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming tomFe.290. Gde-E-165 etc complete all as specified and directed.
M&L glazed ceramic colored tiles in vertical surface 450x300x07mm thick set and jointed neat cement slurry and pointed in white or colored cement to match, over and incl 10mm thick rendering in CM 1:4 also incl demolition hearth or wall tilling including cement mortar bedding and its removal complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .