SPL REP TO BDG NO P232C COOK HOUSE AND DINNIG HALL OF 257 FD WKSP COY EME AND PROVN OF INTERLOCKING TILES IN FRONT OF BLDG NO P20 AT BDTC AREA UNDER GE MH AND RH KHADKI

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris out side MD land complete all as specified and directed.

Material & Labour for Non Skid Ceramic tiles, Coloured, of size exceeding 0.06 Sqm and not exceeding 0.11 Sqm,7 to 8 mm thick [Square or Rectangular] as in Floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and directed.

Material & Labour for Glazed Ceramic tiles, Coloured, of size 300mmX 450mmX 7mm as in Vertical Surfaces such as Skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including backing coat of 10mm thick in cement mortar 1:4 complete all as specified and directed.

Material & Labour for Coloured Vitrified tiles 8 to 10mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed.

All as per item No 4 above but as in skirting over and including 10 mm thick rendering in cm 1:4

Taking down cement plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc and including removal of debris out side MD land complete all as specified and directed.

Material & Labour for rendering to internal brick / concrete surfaces, 15 mm thick in Cement Mortar (1:6), surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for rendering 10 mm thick in Cement Mortar (1:3) on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for preparation of newly plaster surfaces of wall and applying two coats of oil bound distempering over a coat of primer & including wall care putty complete all as specified and directed.

Material & Labour for preparation of newly plaster surfaces of ceiling and applying three coats of white wash over a coat of primer complete all as specified and directed.

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each complete all as specified and as directed.

Supply & Fixing Solid coloured PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening of Sintex or its equivalent make as approved by Accepting Officer complete all as specified and directed.

Supply & Fixing Factory made coloured solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing of Sintex or its equivalent make as approved by Accepting Officer complete all as specified and as directed.

Supply & Fixing Aluminium anodised barrel ower Bolt of size 150 mm size of extruded section complete all as specified and directed.

Supply & Fixing Aluminium cast type anodised Handle, size 150mm long complete all as specified and directed.

Supply & Fixing 100 mm size, heavy weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed.

Material & Labour for 20mm thick Granite stone (table rubbed and polished) in steps, jambs, cills, WHB platforms, counter tops and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 20mm Screed bed in CM 1:4, complete all as specified and directed. Note : The rate quoted is deemed to be included for full moulding of edges and making, opening for kitchen sink all as directed by Engr-in-Charge.

Material & Labour for 20 to 25mm thick machine cut cuddappah stoneas in slab flooring over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl grinding polishing laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed.

Material & Labour for machine cut Kota stone 18 to 20 mm thick slab, as in flooring laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed including roughening of exisiting concrete surface complete all as specified and directed.

Material & Labour for machine cut Kota stone slab as in skirting, dado etc using 18 to 20mm thick slabs laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including borders, margins in two or more shades of slabs over and including backing coat of 10mm thick in cement mortar (1:3) including triangular filleting on top in cement mortar (1:4) complete all as specified and as directed.

Supply & Fixing for solid PVC wall lining (paneling) consisting of 5mm thick wood grain printed & coloured PVC Sheet inclusive of solvent cement and fixing at wall on PVC frame as per manufacturers instruction complete all as specified and directed.

Supply & Fixing for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall and make PVC frame/grid as per manufacturers instruction complete all as specified and directed by the Engr-in-Charge.

Dismantling wall and ceiling board (fibre pulp, insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed.

Supply & fixing tiled false ceiling of Everest Designer tile pre-painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing MS Steel frame, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width,in repairs all complete at all heights as per direction of Engineer-in-Charge.

Supply & Fixing POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling junction complete all as specified and directed.

Supply & Fixing Anodised aluminium frame for doors,windows and partitions with one or more rebates including cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-charge.

Supply & Fixing 12mm thick toughen designed glass of superior quality fixed to aluminium partition and door incl U channels at the top and bottom to hold the glass ,glass camp,sliding track,silicone sealant, glass adhesive, rubber gasket,weather sripping,all required as necessary fitting as per manufacturers instruction complete all as specified and directed. by the Engr-in-Charge.

Supply & Fixing in repairs Double action floor spring hydraulicaly regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply & Fixing in repair 2nd class hard wood plain, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in cupboards, almirah in any position including polish complete all as specified and directed.

Supply & Fixing in repairs 40mm width continuous (paino) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed

Supply & Fixing in repairs 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves complete all as specified and directed.

Supply & Fixing in repairs cup board knobs 40mm size with all fixing screws etc complete all as sepcified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material & Labour for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate) masonary with solid blocks, exc , 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings converting window into door openings, etc. or cutting out defective brick work forunder-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 150 mtr complete all as specified and directed. Note : Making good of wall surface with matching to existing surface complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, complete all as specified and as directed.

Supply & Fixing 20mm bore GI tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors complete all as specified and directed.

Cutting chases, pinning in concrete block walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth complete all as specified and directed.

Supply & Fixing 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. [The rate is deemed to be included for concealing of GI tubes wherever required and directed].

Supply & Fixing in repairs fancy type two way Bib cock 15mm dia, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed complete all as specified and directed. Make :Jaquar/Hindware/Cera.

Supply & Fixing in repairs fancy type 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make :Jaquar/Hindware/Cera.

Supply and fixing in repair fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing fly nuts for iron pipe of 15mm bore complete all as specified and directed.

Supply & Fixing in repairs fancy type CP brass angular stop cock 15 mm dia complete all as specified and directed. Make :Jaquar/Hindware/Cera.

Supply & Fixing in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts, complete all as specified and directed.

Supply & Fixing in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, complete all as specified and directed.

Supply & Fixing in repais fancy type tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, complete all as specified and directed. Make :Jaquar/ Hindware/Cera.

Supply & Fixing in repair towel ring chromium plated complete all as specified and directed. Make :Jaquar/Hindware/Cera.

Supply & Fixing in repairs fancy type heavy duty health faucet chromium plated (ABS Body) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe complete all as specified and directed. Make :Jaquar/Hindware/Cera.

Supply & Fixing in repairs CP grating ring or frame square or round 100mm size complete all as specified and directed.

Supply & Fixing in repairs Vitreous china wash down water closet [Pedestal pattern], white [excluding flushing cistern and flush pipe] including plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap complete all as specified and as directed.

Supply & Fixing in repairs Plastic water closet seat cover (any colour) closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply & Fixing in repairs Vitreous china ware wash hand basin, white, angle back of size 550 mm X400 mm including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting stand, 32mm bore PVC flexible waste pipe and 15mm dia PVC connection 600mm long &15mm dia CP Piller tap complete all as specified and as directed.

Supply & Fixing in repair Vitreous china bowl urinal hallf stall type white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Supply & Fixing in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe complete all as specified and directed. (Minimum weight 60gms).

Supply and fixing in repair PVC Flexible waste pipe 32/40 mm dia with socket for steel sink upto floor level and length not less than 0.60 meter complete all as specified and directed.

Supply and fixing PVC Flexible waste pipe 32/40 mm dia with socket for wash hand basin upto floor level and length not less than 0.60 meter complete all as specified and directed.

Supply and fixing in repair brass chromium plated kitchen sink/wash hand basin waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed.

Supply and fixing in repair 100 mm MS butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete all as specified and directed.

Supply & Fixing in repairs for under counter sunk vitreous china wash hand basin white size 460x342/560x450mm or above miniumum depth 155mm or above under counter oval type including bottal trap, coupling making good as specified and directed.and all connecting accessories, etc (first quality) complete all as specified and directed by Engineer-in-Charge. Make : Jaquar/ Cera/Hindware/ Parryware.

Supply & Fixing in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

Supply & Fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) pipes 110mm dia ,single socketed in any length with rubber ring joints laid in trenches or floor & wall complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) pipes 75 mm dia ,single socketed in any length with rubber ring joints fixed and laid in trenches or floor/ceiling and wall complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) bends any radius,for 110mm dia pipe complete all as specified and directed.

Supply & Fixing in repair PVC (SWR) bends any radius, 75mm dia pipe complete all as specified and directed..

Supply & Fixing in repairs PVC (SWR) junction 110mm bore single T equal or unequal complete all as specified and directed.

Supply & Fixing Rotational moulded Polythene [HDPE] Water Tanks, Cylindrical & Vertical Type 1000 Liters Capacity triple layered 'ISI' marked, hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes complete including taking down old water tanks and removing to store or given to contractor as credit complete all as specified and as directed.

Supply & Fixing Gun metal, globe or gate valve 20mm bore with iron wheel head screwed both end for iron pipe and fixed in repair complete all as specified and directed.

Taking down existing roof treatment of any description including cement plaster below the treatment and removing the debris to a distance not exceeding 50 mtr complete all as specified and directed.

Material & Labour for rendering 15 mm thick in CM 1:4 on concrete surface (roof) mixed with water proofing compound finished even and fair complete all as specified and directed.

Material & Labour for cleaning the plastered /concrete surface with wire brush and applying water proofing treatement as under: (a) Material & Labour for oil based bituminous primer conforming to IS 3384-1986 over cement plaster @ 0.70 Kg/Sqm manufactured by same agency as that of APP over cement plaster on roof surfaces prior laying APP membrane. (b) Material & Labour for 3mm thick and weighing not less than 3.60kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reinforced with non woven polyster fabric, black finished over compatible primer at 0.4Lit/Sqm of with density of 0.87 to 0.89 Kg/Litre at 25 degree celsius and viscosity 70-160 cps or cold sticker on the prepared dry roof surfaces, with torch application of membrane with 10cm overlap bothways after necessary preparation of surface as per manufacturers instructions complete all as specified and directed. (c) NOTE : (i) The contractor will be permitted to use materials procured from any one of the manufacturer mentioned in list of approved makes However, the materials for the entire work shall be of from one manufacturer only. (ii) Work shall be executed by authorized applicator of the manufacturer.

Supply & Fixing aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator complete all as specified and directed.by Engr-in-Charge.

Supply & Fixing aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with and including two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with and including 4mm plain float glass and including 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type paint and shade including taking down existing steel window complete all as specified and directed by Engr-in-Charge.

Material & Labour for preparation of old painted steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & Labour for two coats of Synthetic Enamel paint over one coat of Red Oxide Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Material & Labour for Complete removal of existing treatment of any description on walls with steel wire brushes etc., and applying two or more coats of wall care putty having average minimum thickness of 3mm of on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of alkali resistant primer on walls complete all as specified and as directed.

Material & Labour for 15mm thick plasterring in cement mortar 1:4 on external surface of wall (upto 10 meter height) complete all as specified and as directed.

Material & Labour for preparing the new surfaces of walls and applying two coats of Premium Acrylic Smooth exterior emulsion paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)® upto 2 storey complete all as specified and directed. Make: Asian/Berger

Material & Labour for preparation of old plastered or unplastered surfaces including brooming down or steel wire brushing and applying two coats of white wash on ceilings complete all as specified and as directed.

Material & Labour for complete removal of existing treatment on wall, preparing the surfaces and applying two coats of Premium Acrylic Smooth exterior emulsion paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)® upto 2 storey complete all as specified and directed. Make: Asian/Berger

Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each complete all as specified and as directed.

Material & Labour for Pressed steel frames made out of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed of size 105 x 60mm complete all as specified and directed.

Material & Labour for Pressed steel frames made out of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed of size 125 x 60mm complete all as specified and directed.

Material & Labour for PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate for filling in steel door frames complete all as specified and as directed.

Supply & Fixing 30mm thck flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and both faces covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

Material & Labour for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Material & Labour for two coats of Synthetic Enamel paint over one coat of Red Oxide Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Material & Labour for cement concrete 1:4:8 type D-2, (40mm graded stone aggregate) 75 mm thick sub base or similar items complete all as specified and directed.

Material & Labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. (Thickness of cushion should not be less than 25mm).

Material & Labour for 80mm thick coloured rubburised, glossy finish colour machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade complete all as specified and directed by Engineer-in Charge.

Excavation in trenches not exceeding 1.50m wide and 1.50m depth for foundation, etc., for Shaft wells, Manholes etc not exceeding 10sqm on plan and not exceeding 1.50m in depth and getting out in soft / loose soil complete all as specified and directed.

Returning filling in including spreading leveling watering well ramming in layers not exceeding 25cm thick with soil obtained from excavation complete all as specified and directed.

Demolition and breaking up drain pipes of 150 mm bore RCC/SGSW set in cement mortar including removing the debries to a distance n exc 100 meter, complete all as specified and directed.

Material & Labour for 150mm dia RCC drain pipes class NP2 laid in trenches and jointed with cement mortar complete all as specified and directed.

Demolition of reinforced cement concrete of any description as in cover slab etc and similar work,including removing the debries to a distance not exc 50 meter, complete all as specified and directed.

Material & Labour for Pre-Cast RCC 1:2:4 nominal mix, type B1 Using (20mm graded stone aggregate) as in cover slabs set in cement mortar 1:6 including necessary formwork complete all as specified and directed. Note :Reinforcement shall be measured and paid separately .

Material & Labour for TMT bars 6 to 8 mm dia bars cut to length, bent to shape required including cranking, bending, hooking ends, and binding with mild steel wire not less than 0.9 mm dia confirming to IS, complete all as specified and directed.

Supply & Fixing in repairs 75 mm Cast iron floor trap / Nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1 using 20mm graded stone aggregate complete all as specified and directed.

Supply & Fixing in repairs powder coated aluminium pipe 25mm dia and 2mm thick as in curtain rod fixed to brackets complete all as specified and directed. (shade and design as approved by GE) (Note : Brackets shall be measured and paid separately )

Supply & Fixing in repairs powder coated aluminium brackets fancy type for curtain rods complete all as specified and directed. (shade and design as approved by GE).

Supply & Fixing in repairs 15mm dia, Bib taps, fancy type, chromium plated with capstan or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and suitable for 15 bore of pipe fixed complete all as specified and directed.

Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified & directed by Engineer in charge.

Dismantaling of mild steel work of any description complete all as specified & directed by Engineer in charge.

Supply & Fixing Joist channel, angle, MS pipe or tee sections Fe410-W Gde E-250 quality 'A' fixed independently, without conneted plated etc. all as specified and directed.

Material & Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Supply & Fixing Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment GDE Fe 410-0 or Fe 310-0 complete all as specified and directed.

Supply & Fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, but length of bolts exc 5cm but n exc 10cm long of Diameter of shank 11 to 15mm complete all as specified and directed.

Supply & Fixing Fibre sheet as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engr-in-Charge.

Demoilition of cement concrete(unreinforced) in ground floors and paving n exe. 15cm thickness (below or above ground level) complete all as specified and directed.

Material & Labour for PCC 1:3:6 type C-1 using 40mm graded stone aggregate, 75 mm thick in plinth protection, path , floor complete all as specified and as directed.

Dismantling expanded metal, any thickness or mesh, not exceeding 4.00Kg per sqm fixed with steel or wood fillets, if any complete all as specified and directed.

Supply and fixing welded steel wire fabric not exceeding 4.00kg per sqm complete to wood or steel members complete all as specified and directed.

Material & Labour for PCC 1:4:8 type D-2 (40 mm grade aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Material & Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 complete all as specified and as directed.

Removing excavated material n exc. 50 meter and depositing where directed at a level n exc. 1.5 meter above the starting point complete all as specified and directed.

Material & Labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material & Labour for PCC 1:2:4 type B1 (20mm stone aggregate) as in coping/course edging to interlocking tiles etc.complete all as specified and directed

Material & Labour for preparation of newly plastered surfaces and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed by Engr-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Material & Labour for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheathed FRLS cable 1100 Volts drawn into PVC concealed conduit medium grade including its accessories such as tees, bends ,elbows, socket and chisselling on wall complete and also making good the disturbed surfaces of wall/ ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including concealed MS terminal box ISI marked of suitable size / 3 mm thick hylam sheet on MS terminal box for housing switch ,socket,regulators etc complete all as specified and directed for the following:-

(a) One light point controlled by one switch

(b) One Exhaust Fan/ Ceiling fan point controlled by one switch

(c) One 5 pin 6 Amps socket outlet on same board.

(d) One 5 pin 6 Amps socket outlet on independent board.

All as per item No 125 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor,FRLS 1100 V grade PVC insulated but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire complete all as specified and directed.

All as per item No 125 here-in-before but wiring with 4 sqmm single core multi stranded copper conductor 1100 v grade PVC insulated but unsheathed copper conductor FRLS cable 1100 volts grade and 4 sqmm PVC insulated but unsheathed FRLS cable as earthwire for Power Socket/ AC/ Geyser independent board complete all as specified and directed.

Supply & Fixing switch piano type 240 volts single pole one way 6 Amps complete all as specified and directed.

Supply & Fixing switch piano type 240 volts single pole one way 16 Amps complete all as specified and directed.

Supply & Fixing socket outlet 5 pin 6 Amps shuttered flush type complete all as specified and directed by Engr in Charge.

Supply & Fixing socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type complete all as specified and directed.

Supply and fix in repair ceiling rose surface bakelite with three terminals 2 Amp,240 Volt AC complete all as specified and directed.

Taking down old unserviceable fitting and Supply & Fixing wall mounted extruded aluminium housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4 feet long) lumen 2000 -3000, PF> 0.95, THD less then 10% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge.

Taking down old unserviceable tube light fitting and Supply & Fixing LED light fitting mirror type with high output diffuser 2 feet, 10 W 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as directed by Engr-in-Charge.

Taking down old unserviceable Recess mounting fitting of any type from any height and Supply & Fixing high quality Recess/Surface mounting LED Flat panel 36 Watts size 2'x2' made of die cast aluminium housing with high efficient LEDs glare free opal diffiuser, with IP 20 protection complete as per site requirement connecting with three core flexible copper wire as directed by Engr-in-charge. Make : Halonix/Jaquar/Havells.

Supply & Fixing in repair high efficent LED building security light fitting 36 watt , 240 V, 110 lumen/Watt, PF> 0.95, THD less then 10%, made of pressure cast aluminium housing with high power LEDs, lens and toughned glass IP 66 connecting with three core flexible copper wire 0.55 Sqmm from connector to ceiling rose including GI pipe 32/40 mm light grade with bracket made out of 25x 3 mm strip complete all as directed by Engr-in-Charge.

Taking down old unserviceable ceiling fan of any type, depositing it to MES store and Supply & fixing ceiling fan complete with blades, down rods, electronic regulator/REMOTE and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Taking down existing Exhaust fan and Supply and fix exhaust fan, steel body AC single Phase, 230V of size 450mm sweep heavy duty with, blades, and frame and louvers and exisitng E/F deposited to MES store yard complete all as specified and directed by Engr-in-charge.

Supply and fix electric water heater storage type of capacity 50 Ltr vertical type wall mounted including 15/16 Amp plug top with suitable wall supports and for manual operation, digital temperature display, feather touch buttons, built in thermostate, auto shut off, powder coated single line weld container with PUF insulation, heating element capacity of 2 KW including 7 year warranty of inner tank and 4 year warranty of heating element and 2 year warranty of other part, Voltage rating 230 V, frequency 50 Hz with minimum BEE 3 star rated and including steel braided connecting hoses for Hot and Cold water pipe connecting to CPVC and GI pipe with NRV all as specified and directed by Engr-in-charge. Make : Jaquar/ Havells/ polycab/ Bajaj

Supply & Fixing distribution board factory made TPN 4 - way vertical type with busbars & MCB TP as incoming, Double door metal type AC 415V suitable for fixing SP /TP MCBs as out going complete all as specified & directed. Note : MCBs will be measured and paid seperately.

Supply & Fixing distribution board factory made SPN 8 way in, 240 Volt, Double door metal type suitable for provisioning and fixing MCBs as out going and including SPN MCB 32 Amps as main incoming complete all as specified & directed. Note: MCBs will be measured and paid seperately.

Supply and fixing 415V, miniature circuit breaker (MCB) of TPN, current carrying capacity 100 Amps,10KA 'C' curve in the DB complete with connection, testing and commissioning all complete as speicified and directed.

Supply and fixing 415V, miniature circuit breaker (MCB) of TP, current carrying capacity 63 Amps,10KA 'C' curve in the DB complete with connection, testing and commissioning complete all as speicified and directed.

Supply and fixing miniature circuit breaker (MCB) of Double poles, current carrying capacity 32 Amps,AC, 240V, 10 KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as speicified and directed.

Supply and fixing miniature circuit breaker (MCB) of single poles, current carrying capacity 5 to 32 Amps,AC, 240V, 10 KA 'C' curve in the MCB DB complete all as directed by Engr-in-Charge.

Supply and fix industrial wall mounted plug socket of 32 Amps rating 2P+E complete all as specified and directed.( 3 Nos for AC and 1 Nos for Geyser)

Supply and fix industrial wall mounted plug socket of 32 Amps rating 3P+N+E complete all as specified and directed. (For Electric Chimney)

Material & Labour for sub main wiring but using two single core multistranded PVC insulated copper conductor of size 6 sqmm 1100 volt grade drawn through suitable PVC conduit including 6 sqmm PVC multi standard cable in green colour for continueous earth wire complete all as speicified and directed. Note: 6.0 Sqmm cable two run and 6 Sqmm cable one run in PVC conduit, one run is measured as one RM.

Supply, laying, jointing, commissioning and testing XLPE Insulated ,screened, PVC bedded, galvanized heavy duty underground electric cables of size 35 sqmm 3.5 core in repair with stranded aluminium conductor 1100 volt grade confirming to IS-7098 (Part-I-1988) laid in trenches/ ducts/ wall/ floor/ pipes/ poles including suitable size of fixing clamps, cable glands and aluminium lugs of appropriate size, PVC sleeve etc complete all as specified and directed by Engr-in-Charge.(To be laid open to walls/ floors) MAKE :- Polycab/ Havells/ Finolex/ Gloster Note:- The cable to be fixed to walls with proper saddles and clamps.

Material & Labour for earthing complete in repairs with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to 4.0 mm dia galvanised earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 (20 mm stone aggregate) RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitable size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt & charcoal including , excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. Note: Rate for achieving required depth by compressor machine if required is deemed included in item unit rate.

Supply and Fixing of commercial kitchen hood of size [ 6 Ft (L) X 2.8 Ft (B)] made out of SS 304 jindal/ JSL stainless steel of recommended thickness as recommended by the OEM including turbo force motor drift- air type of capacity 5 HP (Qty as per the OEM recommendation). The chimney comprises of followings:- 1. The Hoods comes with double filter AB- sorbes maximum smoke and release [Carbon-di-Oxide (CO2)] from the smoke and release [Carbon-di-Oxide (CO2)] free air outside. 2. The Hood comes with automatic sensor. 3. The Hood comes with 5 year of warranty. 4. The Hood comes with no rusting grade steel. 5. Automatic mode changer. 6. Bird screen for protection against birds and foreign Material. 7. Rust proof body and blade for durability. 8. Steady metal body with blades. Make:- As approved by GE.

Supply and fixing of double coated ducting system upto (20 Ft) long and thickness of ducting as per the OEM recommendation. 1. Tata authorised double coated high grade material shall be used. 2. 5 year warranty is included. 3. High quality bending with precession. 4. High thick material is used. 5. The creation of duct will be done in work place. Make:- As approved by GE.

Note for item serial number 151 & 152:- (i) The rates are inclusive of all the T&P, minor spare parts and MS clamps of suitable size/ length required as per the OEM's recommendation. (ii) The rates are include of all the civil works required for making the system fully functioned as per the OEM's norms. (iii) Any damage done in fixing the chimney work will be makes good by the contractor at his own expense.

S V CONSTRUCTION (BID ID -3372323)

SAMBHAJI D JARANDE (BID ID -3363250)

M/S K.D.MATE (BID ID -3364703)

BHARDWAJ ENTERPRISES (BID ID -3372533)

ShreHari Civil Enginneering and Contractors (BID ID -3362008)

A B S ENTERPRISES (BID ID -3371433)