Karnataka

Active

Works

Buildings

CONSTRUCTION OF ANGANWADI BUILDING AT MAVINAKERE GP HADLAGATTA VILLAGE BHADRAVATHI TALUK (CAT-1)

Rural Development and Panchayat Raj Department

RDPR Division Office Shivamogga | Shivamogga, Karnataka

Amount: ₹10.0 LCloses: 8 Oct 2026

Timeline

Published23 Sept 2026
Closes8 Oct 2026
Bid Opening9 Oct 2026

Tender Value

₹10.0 L

EMD Value

₹13,000

Closing Date

8 Oct 2026, 4:00 pm

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

B N MANJUNATH

Office Number

Mobile Number

Work Description

CONSTRUCTION OF ANGANWADI BUILDING AT MAVINAKERE GP HADLAGATTA VILLAGE BHADRAVATHI TALUK (CAT-1)

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT28132

Reference Number

RDPR/2026-27/BD/WORK_INDENT28132

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Shivamogga

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredGST Registration Certificate

RequiredValid Registration Certificate.

RequiredCategory-1 Certificate

RequiredValid Domicile Certificate

RequiredAnnual Turn Over Certificate

RequiredStatement indicating the Details as Per Sec-3 of Clause 1.3 A And B i,e Works On Hand

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Category-1 reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional Tenders will not be accepted.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Shivamogga, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number And Valid E-mail.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of cmpletion of the work.

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderer own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season

As Per Govt Order No: DMG/SG/BUD/KRIDE/2025-26 Dt: 12.11.2025. All the works excuting departments shall make it mandatory in their tender document for their contractors to obtain Mineral Dispatch Permit (MDP) from Mines & Geology Department For the use of minor minerals in Government Works. And accordingly, the Additional Chief Secretary/ Principal Secretary / Scretary to the Government of all the Departments shall issue direction to all the Govenment works excuting departments under them . And The same MDP shall be submitted by the contractors along with the bills to the work executing department for proving the payment of Royalty and other fees.

If the documents uploaded on the KPP portal are found to be fake, their EMD will be confiscated and a recommendation will be made to the competent authority to cancel the contract

Technical Criteria

Past Experience

The bidder must submit last 5 years Profit and loss account obtained from Chartered Accountant (CA) Only.

Audited CA Certificate of Annual Turnover

Capabilities of Vendor

The Tenderer should possess valid Registration Certificate.

PWD Registration Certificate (Class I/II/III/IV)

Statement indicating the (A)Existig commitments and ongoing works, (B)Details of works for which tenders are already submitted . The statements should furnished as per statement 1.3 (A),(B) of Section 3 of Qualification information in Standard Tender document.

Others -- Works on hand

Category-1 Certificate.

Others -- Category-1 Certificate.

Valid Domicile Certificate

Others -- Valid Domicile Certificate

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e., 2021-22-2025-26) Achieved in at least one financial year (i.e. 2021-22 to 2025-26) a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 10.00 Laksh

Audited CA Certificate of Annual Turnover

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹13,000

Important Dates

Last Activity

23 Sept 2026

Published

23 Sept 2026

Bid Opening

9 Oct 2026

Download Ends

7 Oct 2026

BOQ Preview

•

CONSTRUCTION OF ANGANWADI BUILDING AT MAVINAKERE GP HADLAGATTA VILLAGE BHADRAVATHI TALUK

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing M.S. grills of required pattern in frames of windows

•

etc. with M.S. flats, square or round bars etc. including priming coat with

•

approved steel primer all complete. Fixed to openi...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

•

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivo...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,in all colours, shades except burgundy, bottle gree...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing and fixing white vitreous china water closet squatting pan (Indian type) : [ PWD SR 2023-24. V-2 Page No 131 Item No.14.13.2 Orissa pattern W.C. pan of size 580x440 mm

•

Providing & fixing of 2track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016 sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in differentsizes with water absorption less than 0.08 % and conforming to I.S. 15622,of approved make, in all colours & shade, over 12 mm t...

•

Granite of any colour, 18 mm thick (slab area above 0.50 m2)[PWD SR 2023-24/ Page No.A-24/Sl. No.410 Volume II

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work...

•

Painting with synthetic enamel paint of approved brand and manu- facture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of app...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.[PWD SR2023-24/ Page No.55/Sl. No. 8.84 Volu...

•

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade (PWD SR of V-3 2021-22 P.No.53.No 8.4

•

Providing and placing on terrace (at all floor levels) Polyethylene water storage tank,IS:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and over...

•

Providing and fixing Chorinated Poly Venyl Chloried (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings. Th...

•

Supplying and erection of RCC rings for well staining of 0.30 m depth using M-20 grade concrete using clean graded granite or trap or Jelly of approved quality 20 mm and down size well compacted inclu...

•

Providing and fixing PTMT bib cock of approved quality and colour. -15 mm nominal bore, 122mm long, weighing not less than 99 g [2023-24 Vol-2 PWD Buildings SR I.No : -13.17.2

•

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making goo...

•

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the wall...

•

Open Conduit system Supplying 19/20mm dia 2mm thick confirming to IS2509 with heavy gauge PVC Conduit Pipe with bends metal junction boxes, adhesive paste etc., and fixing using inverted wood plugs in...

•

Supplying and fixing PVC /metal conduit accessories.[ESR 2023-24 Page No.2 Item No 1.5 ]

•

Supply and Fixing Metal Fan box with Round Hook (ESR 2023-24 Page No.4 Item No 1.13

•

Point wiring using Copper wire without switch, Supplying and Wiring adopting loop system in existing PVC conduit / casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire ) FRLS mul...

•

Wiring for Lighting / Power circuit using one of FRLS PVC insulated 1100 V grade multi copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694...

•

Supplying 6A flush type socket and 6 amphs flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring u...

•

Supplying and Flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due Groove cutting in bricks/stone/ CC wall. [...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and Fixing of Modular Switch & connected accessories on exisitng modular switch plate as per IS 3854 and IS 1293 [ ESR2023-24 Page No.10 Item No 3.66 Amps one way switch&(Demmey switch)

•

Supplying and Fixing of Modular Switch & connected accessories on exisitng modular switch plate as per IS 3854 and IS 1293 [ ESR2023-24 Page No.10 Item No 3.6 6 Amps Two Way switch

•

Supplying and Fixing of Modular Switch & connected accessories on exisitng modular switch plate as per IS 3854 and IS 1293 [ ESR2023-24 Page No.10 Item No 3.66 Amps 3 Way Socket

•

Supplying and Fixing of Modular Switch & connected accessories on exisitng modular switch plate as per IS 3854 and IS 1293 [ ESR2023-24 Page No.10 Item No 3.6Stepped Fan Regulator

•

Supplying and Fixing of Modular Switch & connected accessories on exisitng modular switch plate as per IS 3854 and IS 1293 [ ESR2023-24 Page No.10 Item No 3.616 Amps one way switch

•

Supplying and Fixing of Modular Switch & connected accessories on exisitng modular switch plate as per IS 3854 and IS 1293 [ ESR2023-24 Page No.10 Item No 3.66/16 Amps universal Socket

•

Supplying 1 way plastic Gang Box and fixing using necessary wooden/rawl/phill plugs and screws [ESR 2023-24 Page No.6 Item No 3.12.1]

•

Supplying 2to 4 way plastic Gang Box and fixing using necessary wooden/rawl/phill plugs and screws [ESR2023-24 Page No.6 Item No 3.12.2]

•

Supplying and Fixing of porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers etc., complete[ESR 2023-24Page No.10 Item No 5.7

•

Supplying and fixing Miniature Circuit breaker on existing MCB distribution board using necessary fixing materials and 'C' curve , indicator ON/OFF, energy cross-3 with Short circuit breaking capacity...

•

Supplying and Fixing regular MCB distribution boards on walls / wood boards/ flush mounting using required clamps bolts, Nuts etc., with provision for fixing suitable type capacity MCB's, Single Phase...

•

Supplying and installation/fixing/provision of outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate lid, shock proof, IP65 (whether Proof) , rust proof, dust proof, water ...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, single Phase AC supply conforming to ISS -374-1979 and with double ba...

•

Fixing a ceiling /wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulagor to the existing board together with supplying and fixing SA, ceiling rose, necessary len...

•

Supplyingofround/squarerecess/surface mounted rolling type LED Down light with 15-18W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with White powder coated prewired to mains connector & Has s...

•

Supplying of .feet -PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power facto...

•

Fixing all types and all capacities of fluorsent/false ceiling/sopt light/CFL/LED fittings indoor on the wall.ceiling.rafters/girders using 23/0.0076 inch twin twisted PVC insulated wires, required No...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

2025-26 ICDS ANGANAVADI OM.pdf

Tender Document • 1.98 MB

kw1.doc

Tender Document • 0.17 MB

Hadlagatta AWC.pdf

Tender Document • 4.96 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Buildings

CONSTRUCTION OF ANGANWADI BUILDING AT MAVINAKERE GP HADLAGATTA VILLAGE BHADRAVATHI TALUK (CAT-1)

Rural Development and Panchayat Raj Department

RDPR Division Office Shivamogga | Shivamogga, Karnataka

Amount: ₹10.0 LCloses: 8 Oct 2026

Timeline

Published23 Sept 2026
Closes8 Oct 2026
Bid Opening9 Oct 2026