Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹14.1 Laccepted-finance | ₹14.1 L | accepted-finance |
Tender Value
₹14.1 L
EMD Value
₹35,360
Closing Date
11 May 2026, 10:00 pmClosed
Directorate of Municipal Administration
Construction of Public toilet in the limts of TP Machhe
DMA/2026-27/BD/WORK_INDENT57514
DMA/2026-27/BD/WORK_INDENT57514
Open
Buildings
DMA Town Panchayat Machhe
₹500
₹35,360
11 May 2026
25 Apr 2026
11 May 2026
Construction of Public toilet in the limts of TP Machhe
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying...
Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For RCC Beams, Lintels & Troughs of Aqueducts For...
Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For Roof Slab of builing Form Works Consider 50%
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
KSRB 13-11 : Providing and placing on terrace, polyethylene water storage tanks as per IS12701 : 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, o...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap
Supply and delivery at site special moulded variety 140 mm dia PVC Elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Providing fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For Foundation upto Plinth All other types Form W...
Form Work: As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate For RCC Columns / Shaft (Slip Centering) Form Wor...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm...
Supplying and fixing of PVC casing and capping on the wall or
ceiling using necessary materials like bends, junction box,
elbows, screws at an interval of 300 mm . etc. as required.
Supplying and flush mounting teak wooden box without front
plank, made of not less than 12 mm thick wood, after due
groove cutting, finishing with necessary cement plastering
Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)
& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated
copper wire (confirming to I...
Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping using 2x1.5mm2 (Phase & Neutral)
& 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated
copper wire (confirming to I...
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of
wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC
insulated 1100V grade, multistrand copper wire with low
conductor resistance single core in open or concealed system of
wiring with specified IS...
Supplying and flush mounting powder coated / galvanized
metal box suitable for mounting modular switch plates. The box
should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized
metal box suitable for mounting modular switch plates. The box
should be firmly flush mounted after due groove cutting in
Brick/Stone/C.C wall 8...
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with
required nos. of machine screws, bolts nuts etc., complete on
the existing m...
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with
required nos. of machine screws, bolts nuts etc., complete on
the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator.
Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch
Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 129332Amps DP switch
Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6/16Amps universal socket
Supplying and fixing of modular switch connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps 3way socket.
Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70% lumen maintenance with CRI 80. Power Input: 220-240V 5060Hz Power factor 0.9 alo...
Supplying & fixing of Porcelain fuse channel with cut out on
existing wooden/panel using necessary nuts, bolts and
Supplying and fixing regular MCB distribution boards on
wall/ood board / flush mounting using required clA, bolts,
nuts etc., with provision for fixing suitable type capacityMCB's single phase3 phases...
Supplying and fixing regular MCB distribution boards on
wall/ood board / flush mounting using required clA, bolts,
nuts etc., with provision for fixing suitable type capacityMCB's single phase3 phases...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...
Supply and fixing polished wood board made of not less
than 15mm thick plank on both sides of not more than 2
pieces and fixing the same to the wall using tapered inverted
wooden plugs screws. 8"x6"1....
Supply and fixing polished wood board made of not less
than 15mm thick plank on both sides of not more than 2
pieces and fixing the same to the wall using tapered inverted12"x12"2"
Fixing a ceiling /wall mounting fan of all capacities and all
types, with necessary clA and 'S' hook made out of 15mm dia
MS rod, with 5 A. ceiling rose of approved quality with
necessary length of 23...
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-2_57514.doc
Tender Document • 1.34 MB
Download all tender documents and submit your bid