Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹26.1 L+₹70,759.50 (2.79%)Rejected-Finance | L2 | Rejected-Finance High Rate | |
| 3 | L3₹26.9 L+₹1.5 L (5.82%)Rejected-Finance | L3 | Rejected-Finance High Rate | |
| 4 | L4₹27.0 L+₹1.6 L (6.26%)Rejected-Finance | L4 | Rejected-Finance High Rate | |
| 5 | L5₹27.1 L+₹1.6 L (6.49%)Rejected-Finance 7 4 DNYANESH SOCIETY WARJE MALWALDI PUNE 411 058 | PUNE | MAHARASHTRA | 411058 | L5 | Rejected-Finance High Rate |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
2 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8312SPECIAL REPAIRS TO BLDG NO T47 (ART/DOTS) AT AFMC UNDER GE (CENTRAL) PUNE
2022_MES_523772_1
8312SPECIAL REPAIRS TO BLDG NO T-47 (ART/DOTS) AT
Open Tender
Civil Works
Item Rate
180 days
GE (Central) Pune
As per tender
9 documents required · 9 mandatory
₹500
GE (Central) Pune
₹60,000
Yes
28 Jul 2022
12 May 2022
4 Jun 2022
12 May 2022
2 Jun 2022
19 May 2022
60 days
Amount
Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed
Dismantling of timber scantlings 40 sq. cm and over in section, in any position of framed work complete all as specified and directed.
Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and as directed
Dismantling floor,hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed at site.
S&F Prepainted Galvalume aluminium zine coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self taping screws laid with one corrugation side lap and min 150mm end lap laid to slope complete all as specified and directed.
S & F pre - painted galvalume aluminium zinc coating GI based plain steel sheeting 0.5 mm thick of required colour and shape having tensile strength of 550 Mpa as in ridge valley,gutters,bridge board,roof covering / cladding to wall, fixed with self tapping screwes complete all as specified and directed.
S&F MS work as in main and cross beam hip and jack, rafters, purlins where connected to common rafter running rails and guides, for sliding doors, fixed with angle cleats or other conecting plates Fe-410- as Gde E- 250 complete all as specified as directed
S&F in true horizonal level 595x595x8mm false ceiling non asbestos decorative tiles manufactured by V- Board or equivalent including GI snap grid of size (600x600)mm, using hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm having 0.27mm gauge at every 1200mm, centre to centre maximum and rotary stitched cross tee of size 24x 32mm, having 0.25mm gauge at 1200mm c/c. Wall angle of size 19x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI wire. The board to be finished with two coat of OBD over coat of primer to all side all as specified and directed.
M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) coloured,textured, designed as required area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in 1:6 CM complete all as specified.
M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) coloured,textured, designed as required area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in 1:6 CM complete all as specified.
M&L Glazed ceramic tiles coloured ,textured, designed as required in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match,over and including 10 mm thick backing coat in 1:4 CM complete all as specified.
M&L for 40mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete
M&L for 75mm thick levelling course in cement concrete type B-2 1:2:4 using 40mm graded aggregate complete
M&L for Brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.
M & L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for Rendering 10mm thick on fair faces of concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and as directed.
Taking down cement plaster of any description from brick, stone walls or concrete surfaces including racking out joints hacking for key scrubbing down with water etc and M&L for rendering 10mm thick in CM 1:4 mixed with liquid water proofing compound @ 200 ml per bag of cement on any faces of brick or concrete surface finish the surface even and smooth without using extra cement all as specified and directed. Note :- Liquid water proofing compound to be measured paid separately
Supply only liquid water proofing compound complete all as specified and directed. Make: Pidilite, Fosroc or equivalent
Taking down cement plaster of any description from brick, stone walls or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc and material and labour for rendering 15mm thick on any faces of brick work in cement mortar 1:6 all as directed and specified.
M&L Preparation of new plastered surface and apply two coat of oil bound distemper over 1-2 mm thick wall care putty complete all as specified and directed
M&L preparation of newly plastered surface and using sand paper to have even and smooth surface and applying two coats of weather coat paint (Weather coat Exterior emulsion ) over a coat of white water base primer complete all as specified and directed by Engr in charge.
M&L for complete removal of existing treatment of old plaster surface and applying two coats of oil bound distemper over a coat of suitable primer on old surfaces of walls incld preparation of surfaces and applying white putty on wall surfaces complete all as specified and directed.
M&L complete removal of existing treatment of old plastered surface and using sand paper to have even and smooth surface and applying two coats of weather coat paint (Weather coat Exterior emulsion ) over a coat of white water base primer complete all as specified and directed by Engr in charge.
Material and labour for preparation of old wooden surfaces incld filling of wooden putty and primer where required any description over 10cm width or girth and apply two coats of synthetic enamel paint to change tint of existing surface complete all as directed and specified.
M & L Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer with and including wood putty as directed.
M & L for preparation of new or previously untreated steel surface of any description over 10 cum width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrom primer. Complete all as specified as directed.
Dismentaling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and painted in any mortar.
M&L machine cut Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor etc including rubbing and mirror polishing laid over and including screed bed 20mm thick in CM 1:4 complete all as specified and directed.
M&L machine cut Kota stone 16 to 18 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in risers & skirting etc including rubbing and mirror polishing laid over and including backing coat 10mm thick in CM 1:3 complete all as specified and directed.
M & L for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking/working platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
Material and labour for Chequered cement concrete tiles 25Cm x 25 Cm x 25mm thick over and including 15mm thick screed bed in CM 1:6, set, jointed with grey cement and pigments and pointed in neat cement slurry in floors complete as directed and specified.
M&L for Machine Pressed Precast concrete glossy interlocking Paver block any shape and size confirming to IS 15658 - 2006 of 60 mm thickness M-35 grade with grey cement and pigment including 25 mm thick sand coushioning complete all as spd and directed
Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed
M & L for 75 mm thick cement concrete 1:3:6, type C2, with using 40 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler/filler boards complete as specified and directed.
Taking down Aluminium Door shutters of any size, carry out minor repairs with & including replacement of unserviceable top/bottom rail, hinges, rubber beading, etc and also carry out repalcement of broken wire mesh and glass panes wherever necessary incld 6mm dia MS studs at top and bottom rail complete (wire mesh and glass pane shall be measured and paid separatly) and refixing the shutter in the same opening complete as directed and specified.
All as per item No 37 here-in-before but Alumunium window shutters of any size complete.
Supply and Fix in repair Floor spring heavy duty as per existing for alumnium doors, ISI marked, including taking down shutters, refixing the same and making good the floor to match with the exiting all as directed and specified.
Supplied only 5.5mm thick glass, ordinary quality in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exceeding 1.5 sqm complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but n.exceeding 4 sqm each complete all as specified and as directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube complete all as specified and as directed
S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given on Sl. Page No. 156 of SSR Part-II 2010 Refer item No. 8080 as specified and directed by Engr-in-charge.
S&F powder coated aluminium three track sliding Glazed window with three shutters, side 03 shutters sliding, each shutter width one half of the lenght of the window with the following specification and making good the adjacent surfaces incld loading & unloading :- (i) Cross section of window frame 101 x 40 x 1.5mm thick (ii) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.1 mm thick (iii) sliding shutter frame of cross section 40x 18x 1mm (iv) Aluminium glazing strip of size 18.2 x 16.66mm (v) 5mm thick float glass superior quality for 02 Nos shutter (vi) IDPE rubber gasket for fixing (vii) Locking cleat per shutter - 01 No (viii) One shutter of stainless steel wire cloth 0.36mm nominal dia and 1.18 width of aperature.
S&F ventillators/ louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc all as directed. (a) SP 20048 (b) Glazing clips 19352
Supply and fix second class hard wood plain, solid, straight chawkats and frames, wrought, framed rabated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as directed and specified.
Supply and fix 35mm thick plain, framed, panalled factory made shutters approved quality second class hard wood (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per I.S.1003 (Part-I) kiln seasoned and chemically pressure treated, fixed with screws etc. complete all as directed and specified.
Supply and fix 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) and as directed.
Supply and fix 30mm thick, second class hard wood, factory made, glazed and skeleton window shutter open rebated prepared to receive glass, gauze etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars any numbers including cut and mitred beads for securing glass or wire mesh etc. for windows, the size of members as specified in SSR-2009 Part I clause No 8.20(b) and as specified.
Supply and fix 3mm thick sheet glass ordinary quality and glazing with oil putty in squares as directed and specified.
Supply and fix galvanized mild steel wire cloth 0.63 mm nominal dia of wire and average width of apparature 1.40 mm fixed with tinned tacks or galvanized wire staples all as directed and specified.
M&L in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed
S&F aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed
Supply and fix stainless steel butt hinges 125mm size medium weight and fixed as directed and specified.
Supply and fix stainless steel butt hinges 100mm size medium weight and fixed as directed and specified.
Supply and Fix aluminium anodised barrel tower bolts of extruded section, 150mm long as specified.
Supply and Fix extruded aluminium alloy handles fabricated type anodised 100 mm size as specified.
Supply and Fix extruded aluminium alloy handles fabricated type anodised 150mm size as specified.
Supply and Fix aluminium anodised barrel tower bolts of extruded section, 200mm long complete as specified.
Supply and fix second class hardwood small fittings such as door and window stops and the like n.exceeding 200 cucm each fixed as directed and specified.
S&F in repairs vitreous china wash down water closet pan, 'Pedestal', white , including fixing bolts etc including PVC seat cover white with flat bottom including CP or aluminium anodised hinges devices etc complete all as specified and directed.
S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed
S&F in repair vitreous china flat back type wash basin, white of size 550 x 400 mm including brackets, chromium plated waste coupling and waste pipe complete
S&F in repair Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed complete all as specified and as directed
S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed
S&F in repair urinal partitions slabs terminating about 40cm above floor line, fixed complete all as specified
S & F in repairs fancy type hand shower (Health Faucet) (ABS body) with 1.2 Mtr long Flexible tube and wall hook for iron pipe 15 mm bore or brass ferrule complete all as specified and directed at site.
S&F in repair fancy type pillar taps 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed completed all as specified and as directed.
S&F in repair PVC connection 15mm dia 600 mm long
S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed
S&F in repair 15mm chromium plated cast copper alloy bib taps (fancy type) complete all as specified and as directed
S&F in repair chromium plated angle cock 15mm bore complete all as specified.
S & fixing in repair syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets,32mm flush pipe etc, complete all as specified.
Supply and Fix in repairs Stainless steel grating dome 125mm dia with or without waste holes as required.
Taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified and directed of following sizes :-
(a) 15mm bore
(b) 20mm bore
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) incld cutting chases, pinning in brick/concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 complete all as specified and as directed of the following sizes
(a) 15mm bore
(b) 20mm bore
S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc incld cutting chases, pinning in brick/concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 complete all as specified and directed of the following sizes :-
(a) 15mm bore
(b) 20mm bore
S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or floor/wall complete all as specified & directed of following sizes :-
(a) 110mm bore
(b) 75mm bore
S&F in repairs PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.
S&F in repairs PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.
S&F in repair 32mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe as in WHB/Sinks/urinals etc complete all as specified and as directed
Dismantling water tanks capacity exc 250 Ltr and n.exc 500 Ltrs and removing to store
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc complete.
S & F in repair fancy type Stainless steel curtain rod 25mm dia with SS brakcet suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc, knobs, rings @ 10cm c/c etc complete all as specified.
Rubbing and Polishing to existing kota stone floor/ terrazo tile/ terrazo cast in situ incld filling of joints where required upto entire satisfaction of Engineer-in-Charge and complete as directed
S&F, SGSW gully trap square or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed.
M & L Preparartion of old painted steel and steel based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint for changing to tint complete all as specified and as directed
M&L French polishing on old wooden surfaces (i.e wooden hand rail) of any description,width or girth including cleaning and preparing the surface with two or more coats complete all as specified and as directed.
Taking down old unserviceable point wiring ( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants,regulators sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified. Note -(credit for above items should be made as per conditions separately)
Taking down old unserviceable/worn out sub main wiring/service wire of any type and size complete all as specified.
Taking down Main switches/DBs/Fuse units of any make and type including teakwood board, MCBs/MCCBs etc complete and making good the disturbed surfaces including colour wash complete all as specified.
Taking down ceiling fan/Exhaust fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan, Painting of ceiling fans complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified.
M&L for point wiring complete with and including single core FRLS PVC insulated un-sheathed flexible bright annealed multi stranded copper conductor cables 1.5 sqmm (22/0.30mm) 1100 Volts grade drawn through and including heavy grade PVC rigid Conduit of suitable size or higher dia as required at site concealed in walls /floors/ceiling/roofs etc. including all accessories/ fittings/ junction boxes/inspection covers etc. of heavy grade, ISI marked and modular type sunken boxes and including modular plates (inside & outside) factory made including 1.5 sqmm 1100 V grade FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cable as continuous earth wire connected to metallic bodies of luminaires/fans etc. at one end to common earth dolly at other end, complete all the specified. For the following
a) One light/fan point controlled by one, One-way switch complete all as specified
b) One additional light point on the same switch circuit
c) One 5 pin 5 Amp Socket outlet point on same board complete
d) One 5 pin 5 Amp Socket outlet point on independent board complete
All as per Item No. 95 here in before but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.
S & F Modular switch 1 way 10A, 1 module single pole, 230V complete all as specified
S & F Socket, 6A - 2/3 pin combined 2 module flush type, multipurpose 230 Volts, single pole one way complete all as specified
M & L Switch socket outlet multipurpose 3 pin, 15 amp and one pin, 5 amp controlled by one switch flush type universal, 230 volts complete all as specified
S & F Ceiling fan regulator electronic, step type suitable for ceiling fan 1200 mm sweep 230 Volts single phase AC complete all as specified
S&F ceiling rose surface type three terminals complete all as specified
S & F Single pole & neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of 20 A , 240 Volts complete all as specified.
M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm in and including concealed PVC rigid conduit incl accessories complete all as specified. (Note:- (i) Making good of disturbed surfaces will be done by contractor without any claims. (ii) 3 runs of 6 Sqmm conductor and one run of PVC rigid conduit shall be measured as one unit length.)
M & L for Sub main wiring complete with two single core 4 sqmm and one core of 4 sq.mm earth wire,1100 volts FRLS grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor in and including concealed PVC rigid conduit including accessories complete. (Note:- Making good of disturbed surfaces will be done by contractor without any claims.(ii) 3 runs of 4 Sqmm conductor and one run of PVC rigid conduit shall be measured as one unit length.)
M & L for Sub main wiring complete with 4 single core 6 sqmm and one core of 6 sq.mm earth wire,1100 volts FRLS grade, PVC insulated, stranded copper conductor cable with continuous copper earth conductor in and including concealed PVC rigid conduit including accessories complete. (Note:- Making good of disturbed surfaces will be done by contractor without any claims.(ii) 5 runs of 6 Sqmm conductor and one run of PVC rigid conduit shall be measured as one unit length.)
Supply and fitting wall mounted LED tube light fitting 5 watts, plastic batten with white acrylic cover, 230 volts with integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements provision of new 3 core multistranded copper conductor of suitable size from ceiling rose to fitting complete all as specified and as directed.
Supply and fitting Sleek round recessed mounting LED downlight fitting 6 watts with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation, 230 volts with integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary fixing arrangements provision of new 3 core multistranded copper conductor of suitable size from ceiling rose to fitting complete all as specified and as directed.
Supply and fitting Sleek round recessed mounting LED downlight fitting 12 watts with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation, 230 volts with integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary fixing arrangements provision of new 3 core multistranded copper conductor of suitable size from ceiling rose to fitting complete all as specified and as directed.
Supply and fitting Sleek round recessed mounting LED downlight fitting 15 watts with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation, 230 volts with integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary fixing arrangements provision of new 3 core multistranded copper conductor of suitable size from ceiling rose to fitting complete all as specified and as directed.
Supply and fix in replacement LED Tube light fittings wall/Ceiling mounted, 18 W LED 6500K with Ultra bright LED Polycarbonate Tube-light with very high efficiency provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector complete
S&F LED Security light of luminaires 24 watt complete with all accessories and including wall mounting bracket of suitable size including clamps, nut bolts etc. including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector complete
S&F vertical 6 way TPN double door,recess mounted/wall mounted, MCCB as incomer and outgoing MCB SP/TP is 4 pole V-Tec of 160A rating & 25KA breaking capacity, MCCB is pre-fitted at factory & including price of MCCB, all as specified by Engineer in charge( Note : Empty space shall be covered by blanking plate and connect with lugs without any extra cost )
S&F MCB TPN DB 4 way, double door, with 200 amp rated busbar 415 V, all as specified.
Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN 40 Amps and current carrying capacity in the DB complete with connection testing and commissioning all as specified
S&F MCB SPN DB 8 way, double door, with 200 amp rated busbar 240 V, all as specified.
S & F for MCB SPN of rated capacity 6-32 amps, 240 volts breaking capacity 10 KA, B-curve installed in existing distribution board complete.
Supply and fixing SP 5 to 32 amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified. .
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
Excavation in trenches in soft/loose soil n.exc 1.5 m wide and n. exc 1.5 m depth and getting out, including trimming the sides and forming bottom surface to required levels for laying cables complete all as specified and as directed.
M & L for laying of RCC pipes, class NP2 with one collar per length of pipe of dia 100mm, 2 Nos half round (for bottom and top) and before laying exacavated area shall be levelled all as secified and directed.
Returning, filling in trenches in hard/dense soil in layers n.exc. 25 cm after laying of cables including spreading, levelling, and well ramming complete all as specified and directed.
Removing surplus excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed
M&L for 40mm dia light grade galvanized pipe ISI marked with all fitting ISI marked , laid in trenches, under road or fixing on wall/pole/ crossing nallah etc complete all as specified and as directed .
Supply, laying, testing, commissioning of cable XLPE insulated armoured heavy duty electric cable including end termination with necessary cable glands, lugs etc in trenches/ poles/ walls through pipes etc, ISI Marked (1100V grade) with multistranded aluminiuim conductor, cross sectional area 35 Sqmm 3.5 Core complete all as specified and as directed.
Agarwal Agencies
Parhar Enterprise
shiva traders
PRASHANT CONSTRUCTION
N B ENTERPRISES
TRINITY ENGINEERS
Pratap enterprises
ANIL CONSTRUCTION CO.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .