CONSTRUCTION OF TOILETS FOR GUARD ROOM IN NOFRA AT CNA (OF)

Amount

Surface dressing n.exc 15 cm deep in soft/ loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation, for laying of HT cable, poles, pipes etc and getting out including of dressing/trimming sides and levelling, grading and ramming of bottom excavation complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundain and filling around post complete all as specified and directed.

M&L for reinforcement cement concrete, Design mix M-25 using (20 mm graded aggregate) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc complete all as specified and directed.

M&L for reinforcement cement concrete, Design mix M-25 using 20 mm graded crushed stone aggregate as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc complete all as specified and directed.

M&L for reinforcement cement concrete, Design mix M-25 using 20 mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for reinforcement cement concrete, Design mix M-25 using 20 mm graded crushed stone aggregate as in beams, cantilever, bressummeres lintels over 1.50m span complete all as specified and directed.

M&L for reinforcement cement concrete, Design mix M-25 using 20 mm graded crushed stone aggregate as in Chajja complete all as specified and directed.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter, including flat rough finished surafaces of concrete complete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns, and stanchions, square, rectangular or polygonal in shape, including flat rough finished surafaces of concrete complete all as specified and directed.

Form work to sides and soffits of floor and roof beams, beams haunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete (flat) complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works, flat rough finished surafaces of concrete, n.exc 200mm thick (horizontal or sloping) complete all as specified and directed.

Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n.exc 20cm wide & sides of RCC/PCC bands in walls, horizontal or sloping & similar work exc 10cm but n.exc 20cm wide rough finished surfaces of concrete complete all as specified and directed.

Form work to chullah hoods, chajjas, troughs & similar items including edges rough finished surfaces of concrete (flat) complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 6 to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for fly ash old size birck curved on plan exc 6 metre mean radius built in CM 1:6 complete all as specified and directed.

40 mm thick Damp proof course to horizontal or vertical surface including necessary form work In CM 1:2:4 type B-0 complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil after laying the cable etc complete all as specified and directed.

Removing excavated material/soil n.exc 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Moorum/red bajri filling in floors or paving, laid in layers n.exc 15 cm thick, spread, leveled & rammed including watering complete all as specified and directed.

M&L Hardcore of guage exc 63mm, broken bricks deposited, spread & leveled in layers n.exc 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for 100 mm thk PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed aggregate as in plinth protection and paving 75mm thick laid in slope finished even and smooth without using extra cement complete all as specified and directed.

M & L screed bed or bedding layers of mortars 15 mm tihck in CM 1:6 for laying floor finishes

M&L for 25 mm thick PCC type B-1 using 20 mm graded crushed stone aggregate in flooring cmplete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 as in ceiling finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:3 as in ceiling finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:4 as in ceiling finished even and fair without using extra cement complete all as specified and directed.

M&L for preparing new decorated wall surfaces including cornices, plasters etc and applying two coat of oil bound distamper on wall surfaces complete all as specified and directed.

Preparation of newly plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint including curing complete all as specified and directed.

M&L for three coats of white wash on surface of wall including preparation of newly plastered surface complete all as specified and directed.

S&F steel windows with side hung shutters including Box type hinges with steel handles, & steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including Box type hinges with steel handles, & steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F framed work such as grills, gratings, etc, with ends of bar shoulder & or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks & similar work conforming to Fe-290 GDE -E-165 complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, orstainless steel wire staples all as specified & directed.

S&F 3 mm thick sheet frosted glass and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over one coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfaces complete all as specified and directed.

S&F in repair WPC double Door Frame 125x 65 mm including all fitting making good after complete all as specified and directed.

S&F in repair 35 mm thick WPC door including making good after complete all as specified and directed.

S&F 100 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 100 mm of extruded section and fixed complete all as specified and directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and directed.

S&F 20 mm size gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe.

Angular/stop valve cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.,

S&F Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as specified and directed.

S&F Vitreous china wash basin, white flat back, size 550 x 400 mm including brackets and cutting for and pinning in ends of brackets or errecting stand with pedestal and 32 mm dia PVC waste pipe including waste copling 32mm size full thread complete all as specified and directed.

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, including S&F of Plastic water closet seat, black/white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminized hinging devices complete all as specified and as directed.

S&F PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections, brackets, including S&F PVC flush pipe 32mm bore of polyethylene of low or high density complete including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe) complete including provding and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in floor complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) Junction single(single T) with access door, equal or unequal complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in floor complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing membrane comprising of the following for non approachable roofs.

Applying a coat of oxidised bitumen based solvent primer @ 0.3Kg / Sqm

Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2Kg / Sqm incl cleaning surfaces.

Laying 3mm thick unrolled over the bitumen coated surface, polymeric water proofing membrane hyperplas standard wt not less than 3kg/sqm with 100 mm over laps shall be sealed by flame as per manufactures instructions.

Applying two coats of bituminous base aluminium paint including preparation complete

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation etc, or for for shafts, wells, cesspits, manholes, pierholes etc n exc 10sqm on plan

M&L for PCC 1:4:8 (40 mm graded ) in foundation, filling and mass concrete complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M men radius built in CM (1:4) complete all as specified and directed.

Plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping including weathering, slightly rounded or chamfered angles and including necessary form work complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement with mixing of water proofing compound.

Supply only intergal water compound

Material and labour for cement concrete type B-1 1:2:4 (20mm graded) insurface channel and drains all as specified and directed.

Precast re-einforced cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) set in CM 1:4 as in slab for water tank/shelf, landings, cooking plateform cover slabs (for man holes etc) chullah hoods, chajjas, water trough, managers, shelves & similar articles with plain faces complete all as specified and directed.

TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for SGSW drain pipe (Gde A) 150 mm bore (internal dia) laid in trenches and jointed in CM 1:1and tested complete as as specified

M&L for concrete bed in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under hauching against the sides of pipes after they are laid and tested for 150 mm dia pipe complete all as specified and directed.

M&L for Returning, filling soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm

Removing exvacated any type of soil to distance exc 250m and n.exc 500m depositing as specified directed

S&F dia 1.42m and 1.73m height and capacity 2000 Litre 9-10 user Septic tanks in vertical design has two separate integral compartment for proper settlement and decomposition of solid waste incl all necessary fitting and complete all as specified and directed by GE Make : Supreme safeguard and equavalanted

M&L Soakage well, exc in Ordinary soil, foundation in PCC 1:3:6, wells of Honey combed and Solid in M-25 Concrete, incl Intercepting Chamber , screen Chamber Brick work in cement mortar, RCC cover slab in M-25/SFRC Cover, interconnecting pipe of RCC/DWC complete filling with brick bats, complete of Size 1.20 mtr dia x 1.50 mtr deep

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation and getting out in soft/loose soil.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in Fdn and filling around post.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point

M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) and as directed.

M&L Hardcore of guage exc 63mm, broken bricks deposited, spread & leveled in layers n.exc 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for 100 mm thk PCC 1:4:8 type D-2 as in subbase to flooring complete all as specified and directed.

M&L Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set jointed & pointed in neat cement slurry in floors with grey cement and pigment over screed bed or bedding lavers or mortars 15 mm thick in CM 1:6

Material and labour for concealed point wiring in and including rigid non-metallic PVC heavy duty conduit, 19/20mm dia/suitable size as per site requirement including cutting chases for conduits sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one light / fan/ exhaust fan/ call bell point controlled by one switch complete all as directed, as per following :-

One light/fan point controlled by one switch, one way switch single pole.

One 3 pin 5 Amp socket outlet on the same board .

One 3 pin 5 Amp socket outlet on independent board

Supply and fix modular switch, 6 amps, 1 module, single pole, one way,240 V complete all as directed.

Supply and fix modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps, flush type, ISI marked complete all as directed.

Supply and fix ceiling rose surface bakelite, three terminal complete all as directed.

Supply and fix moudular cover plate with grid frame of 3 module, suitable for fix switches, sockets and fan regulator complete all as directed.

Supply and fix moudular cover plate with grid frame of 6 module suitable for fixing modular switches, sockets and fan regulator complete all as directed.

Supply and fix moudular flush type metal boxes of 3 module with brass screw cup washers complete all as directed.

Supply and fix moudular flush type metal boxes of 6 module with brass screw cup washer complete all as directed.

Supply and fix LED tube light fitting box type 20 watts, 2000-2200 luminaire with poly carbonate LED upto 2100 lumin tube rod with in built reflector of same make, connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0. 20mm with two Nos. MS bracket on wall including hanging arrangment and necessary fixing arrangement complete all as directed.

Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 4 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as directed.(Note : MCBs will be Measured separately)

Supply and fix MCB, SPN, 240 volts, 32 amps capacity, 'C' series complete all as directed.

Supply and fix MCB, SP, 240 volts, 5 to 32 amps capacity, 'C' series complete all as directed.

Supply and fix MCB, SPN, 240 volts, 5 to 32 amps capacity, 'C' series complete all as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including making proper hole of required size in wall to fit the exhaust fan complete.

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable.

M & L brick protection cover cable of "Sub class 'B' laid dry over cable (length of brick shall be laid across the length of cable) complete all as specified and directed.

Supply and fixing GI steel tubing 50 mm bore, light grade, IS Marked including all fittings, laid in trenches complete all as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core with using suitable size of thimble and glands complete all as directed.

Schedule of credit amount of Rs 0.00 to be deducted during AOC.

m/s R K SETHI

R R VISHWAKARMA CONSTRUCTION CO