GE (N) P/TOKEN- 62 OF 2019-2020 REPAIRS TO FLOORING, HARDSTANDING, PATH AND CERTAIN MISC WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Dismantling floor, hearth or wall tiling/paver block/chequered tiles including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for double charge coloured vitrified tiles 10mm thick (square/rectangular) of colour and pattern as approved by GE, polished, area of each tile exc. 0.18Sqm but not exc. 0.36 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for double charge coloured vitrified ceramic tiles 10 mm thick as in vertical surface, of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base ,mass concrete including demolition existing PCC complete all as spd and directed.

M&L for chequered cement concrete coloured glossy tiles of size 30cmx30cmx 25mm thick in floor laid and jointed in cement slurry and pointed in grey cement and pigment over 20 mm thick screed bed in CM (1:6) complete all as spd ane directed

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11sq.m but not exceeding 0.18sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 300mm x 200mm x 7mm thick of colour as in dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

M&L glazed ceramic coloured tiles of size 600 x 300 x 7 to 8mm thick, of colour and pattern as approved by GE, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete, all as specified.

M&L glazed ceramic highlighter coloured tiles of size 600 x 300 x 7 to 8mm thick, of colour and pattern as approved by GE, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete, all as specified.

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling existing complete all as specified and as directed.

Material and labour for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical surface, fixed with neat cement slurry with pigment to match the shade of slab or arldite, including rubbing and polishing complete including dismantling existing all as specified and as directed

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

M&L Cement Concrete 1:2:4 Type B1 (20mm Graded Stone Aggregate) 40mm thick, as in Floors, court yard etc., and finished the Cement Concrete Surfaces Even and Smooth with using Extra Cement, complete including demolition existing all as specified and as directed.

Supply and fix for glass dividing strips 3mm thick and 38mm width, inserted in position conform to design complete all as specified and as directed.

M&L for cement concrete 1:3:6 Type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection and courtyard, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cement including demolition existing complete all as specified

M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces with sagol finish all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces and applying two coats of cement base paint over a coat of primer as specified and directed.

M&L for preparation of new plastered or unplastered wall surfaces and applying two coats of acrylic distemper over a coat of primer as specified and directed.

Material and labour for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes)

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces to receive new finish complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces to receive new finish complete all as specified and directed.

M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces.

M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces.

M&L for applying one coat of alkali resistant priming paint on wall.

M&L for applying one coat of alkali resistant priming paint on celing.

M&L for two coats of acrylic distemper of approved tint on wall surfaces

M&L for two coats of acrylic distemper of approved tint on ceiling surfaces

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

M&L for one subsequent coat of acrcylic distemper complete all as specified and as directed.

Preparation of old treated plastered/ false ceiling surface of ceiling by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

Material and labour for preparation of old surfaces of walls and applying two coat of white wash complete all as specified and as directed.

Material and labour for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint.

M&L for preparation of old surfaces of wood and wood based material/ asbestos surface of any description in ceiling etc over 10cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old plastered or unplastered surfaces and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces and applying two coats of cement base paint as specified and directed.

Material and labour for preparation of old treated plastered or unplastered/ concrete surfaces by over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of plastic emulsion paint complete all as specified and as directed.

Preparation of old surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of luster paint complete all as specified and as directed.

Preparation of old surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coat of luster paint complete all as specified and as directed.

M&L for French polishing on old wooden surface of any description including cleaning and preparing the surfaces with a coat of wood filler and one or more coats of French polishing till the desired finish is obtained.

Material and labour for scrapping out old treated wooden surfaces in floors, staircase etc ,sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or more coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed.

All as per serial item No.46 here-in-before but as in wooden doors, window and wall paneling.

Material and labour for preparation of old decorated surfaces and applying one coat of 100% Acrylic exterior emulsion paint to mangalore tiles/chequered tiles as in roof/ parapet wall/floor etc. complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap including dismantling existing sheet any type complete all as specified and as directed.

Material and labour in repair for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

Material and labour in repair for 6mm thick asbestos cement, two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

Dismantling of structural steel work of any description including doors, gates, framed trusses etc. complete all as specified and as directed.

Supply and fix for mild steel work in tubular trusses including special shaped washer etc. complete using hollow mild steel sections for structural use conforming to IS 4923:1997 complete all as specified and as directed.

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

Supply and fix for 1.00mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified anda as directed.

Taking down door shutter of any description, area exc.1sqm and not exc. 2 sqm each and refixing in same opening after making necessary repair complete all as directed.

S&F in repairs chromium plated two way bib cock quarter turn with wall flange 15mm dia Cat No. QQT 7041 of make Jaquar ‘QUEEN'S series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated fittings angular stop cock quarter turn with wall flange 15mm dia Cat No. QQT 7053 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated pillar cock quarter turn, Cat No. QQT-7011 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated pillar cock 15mm dia Push type make Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated single towel rail 600mm long including built in side brackets ,Cat No. AQN-7711 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated toilet paper holder ,Cat No. AQN-7751 of make Jaquar ‘‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated soap dish ,Cat No. AQN-7731 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated towel ring round, Cat No. AQN-7721 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs ,Cat No. QQT-7281 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs chromium plated towel rack, 600mm long with lower hangers, Cat No. AQN-7781 of make Jaquar ‘QUEEN'S Series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repair 5 mm thick float glass looking mirror with stainless steel wall brackets complete all as specified and as directed.

Supply and fix in repair brass chromium plated mixer for mixing hot and cold water screwed down high pressure for iron pipe of 15mm bore complete all as specified and as directed. Make Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs, chromium plated long body bib cock with wall flange 15mm dia Cat No. CON-107 KN of make Jaguar ‘CONTINENTAL' series or other equivalent series of Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in reapir 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. Make Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Removing excavated soil, debrises obtained from demolition from various locations (other than this work) from site to outside MOD land complete all as as directed. The location at out side MOD land for disposal shall be located by the contractor himself).

Complete removal of existing water proofing treatment of any description, thickness including cement mortar screed in roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust including flashing at junctions of wall to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all as directed.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge including testing :-(a) On the dried plastered surface, one coat of approved bituminous primer @ 0.40 litre/Sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160 cps or cold sticker shall be applied. (b) one coat of hot bitumen of hot blown bitumen of 85/25 shall be applied @1.20 kg/Sqm over primered surface (c) APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 Kg/Sqm with plain finish shall be laid by torch application method over the hot bitumen to make it sandwitched with bitumen on roof surfaces. (d) Apply two coats of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be at least 100mm at the longitudinal edges and 150mm at the ends. Notes: (i) The contractor/Company shall furnish 10 years performance warranty as per manufacturer of material (ii) The work should be done by a company recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as directed.

Material and labour for reinforced cement concrete (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) as in roof padding using liquid water proofing compound as per manufacturer's instructions including finishing the surface of concrete even and fair complete all as specified and as directed. NOTE: The work to be done at height exc 12m and n exc 15m . The rate quoted should be inclusive of Machinery required for handling of materials.

M&L Rendering 15mm thick in Cement Mortar (1:4) on roof surface finished even and fair using liquid water proofing compound as per manufacturer's instructions complete all as specified and as directed.

Supply only Integral liquid waterproofing compound complete all as specified . Make : Dr Fixit or equivalent as per Appx. 'A' as approved by GE.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale, dirt etc from tanks, mouths of circulating pipes for capacity of tank exc.500 litres and n.exc. 1000 litres complete all as directed

All as per serial item No. 80 here-in-before but for tank capacity exc. 250 litres and n.exc. 500 litres

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as directed.

Supply and fix for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning for refixing complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning for refixing complete all as specified and as directed.

Supply and fix for 25mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down existing tubing complete all as specified and as directed.

Supply and fix for 32mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down existing tubing complete all as specified and as directed.

Supply and fix in repair for 25mm bore dia gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix in repair for 32mm bore dia gun metal globe or gate valve,with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix in repairs for 500 litres capacity, rotational moulded polythelene water storage tanks (ISI marked) (cylindrical vertical with closed top), hoisted and fixed in postion including 20mm size brass float valve, high pressure, with polythene float and flynut screwed for iron pipe and fixed and connected fittings including dismantling existing water tank complete all as specified and as directed.

Supply and fix in repairs for 1000 litres capacity, rotational moulded polythelene water storage tanks (ISI marked) (cylindrical vertical with closed top), hoisted and fixed in postion including 20mm size brass float valve, high pressure, with polythene float and flynut screwed for iron pipe and fixed and connected fittings including dismantling existing water tank complete all as specified and as directed.

Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed.

M & L chicken wiremesh of any size and description complete all as specified and as directed.

Supply and fix in repairs for vitreous china wash hand basin, white, size 550 mm x 400 mm flat back excluding taps but including CI brackets, chromium plated brass waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32mm dia, of required length, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix for brass mortice lock, vertical type, size 100mm of 4 levers with duplicate key complete all as specified and as directed.

Supply and fix in repairs vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan of 'Orissa' pattern, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and integral foot rests any pattern, including provision of lime concrete bedding including connection to trap and to flushing pipe, antisyphonage pipe including 32mm dia PVC flush pipe etc. and making good to the floor complete all as specified and as directed.

Material and labour for 12mm thick mineral fibre false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE).

Supply and fix for fibre glass reinforced translucent corrugated sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed.

Supply and fix for brackets for drapery/ curtain rod, decorative type, powder coated aluminium section as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix for drapery/ curtain rod of 25mm dia, decorative type, powder coated aluminium section complete all as specified and as directed.

Supply and fix in repair for antique rod of 25mm bore as in curtain rod decorative type brass coated section as per sample kept in GE (N) Pune office complete all as specified and as directed.

Supply and fix for antique double rod brackets to suit the curtain rod of 25mm dia, decorative type brass coated section complete all as specified and as directed.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. 3. The site is in scattered area. The building(s)/site(s) shall be handed over in phases and the contractor will have to arrange his working programme accordingly. No claim whatsoever for not giving the entire site on award of work and for giving the site gradually will be admissible, except granting fair and reasonable extension of time.

M/S OMSAI ENTERPRISES

J D Contruction

Pratap enterprises

K B Enterprises

K.S.JITE AND SONS

R J ENTERPRISES

SAGAR ENTERPRISES