GE/PKT-48/2020-21

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in any type of soil (soft/hard) complete all as specified and as directed.

M & L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface complete all as specified and as directed. (Area of the substructure in contact with backfill to be measured).

M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M & L for Cement Concrete 1:4:8 type D-2 using 40mm grded crushed stone agg as in fdn filling and mass concrete complete all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for mild steel TMT bars 6mm dia to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per srl item No. 7.00 here-in-befofe but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M & L for RCC M-25 (Design mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M & L for RCC M-25 (Design mix) using 20 mm graded stone aggregate as in chajjas and the like complete all as specified and as directed.

M & L for RCC M-25 (Design mix) using 20 mm graded stone aggregate as in beams, cantilevers lintel over 1.5 m long span and the like complete all as specified complete all as specified and as directed.

M & L for RCC M-25 (Design mix) using 20 mm graded stone aggregate as in column, pillar, post etc. complete all as specified and as directed.

M & L for RCC M-25 (Design mix) using 20 mm graded stone aggregateas in slab supported on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and as directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed.

M & L for formwork to chullah hoods, chajjas, troughs and similar items including edges with rough finished flat surfaces of concrete, complete all as specified and as directed.

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with rough finished flat surfaces of concrete, complete all as specified and as directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished flat surfaces of concrete,complete all as specified and as directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. ; with rough finished flat surfaces of concrete, complete all as specified and as directed.

M & L for formwork to sides of square or rectangular pillars, posts, struts, piers, columns and stanchions with rough finished flat surfaces of concrete, complete all as specified and as directed.

M & L for brick work with fly ash old size bricks,straight or curved on plan exc 6m mean radius built in CM 1:6 complrte all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified and as directed.

M & L for rendering 15 mm thick on other than fair faces of brick surfaces/stone masonry in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed.

M & L for rendering 5 mm thick on chajjas, facias, ceiling and the like in cement mortar (1:3), finished even and smooth on new concrete surfaces,complete all as specified and as directed.

M&L for Returning filling including spreading levelling, watering and well ramming in layers nexc 25cm thick complete all as specified and as directed.

M&L for Removal of excavated soil/rocks to a distance nexc 50m and depositing where directed at a level nexc 1.5m above the starting point complete all as specified and as directed.

M&L for Earth filling spreading and levelling in layers n exc 25 cm thick and well ramming incl watering as required complete all as specified and as directed.

M & L for 75mm thick Cement Concrete type D-2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L for hardcore of broken stone boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C-1 (20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed or bedding layer 20 mm thick in cement mortar 1:6 complete all as specified and as directed.

M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including backing coat 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.

S & F of pressed steel frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S & F of 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F of MS barrel tower bolt 200mm long stove enamelled black with bright bolt complete all as specified and as directed.

S&F of MS pressed handle oval type, stove enamelled black 150mm size complete all as specified and as directed.

S & F of MS Sliding door bolts 300mm long plate type stove enameled black with bright bolt not less than 12mm dia with and incl a min 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and as directed.

S & F of steel window/Ventilator factory made box type and shutter (double shutter) glazed and gauzed with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including grill of 12 mm sq bars all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 all as specified and as directed

S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and applying two coat of cement base paint over and including a coat of primer/chalk whiting of any colour complete all as specified and as directed

M & L for preparation of new plastered surfaces of wall and applying two coat of distemper oil emulsion over and including a coat of 3mm thick wall care putty finish complete all as specified and as directed.

M & L for preparation of new undecorated plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed

M & L for applying two coats of synthetic enamelled paint over steel and iron surfaces of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

M & L for applying two coats of synthetic enamelled paint over and including a coat of pink primer over wood & wood based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

M & L for providing water proofing treatment with APP based polymeric membrane minimum weight 3 Kg/sqm and minimum thickness 3mm, reinforced with polyester non woven fabric (weight not less than 150gm/sqm) applied over and including one coat of oil based bitumen emulsion primer @ 0.3 liter/sqm(or as per the manufacturer instructions) including cleaning of surface throughly from dust and dirt and providing 15mm thick rendering in CM 1:4 with WPC (as per manufacturer instructions) followed by new membrane with torch application with 10 cm overlaps on sides and end joints. Finally painting the surface with bituminous aluminium paint @ 100gm/sqm complete all as directed. Note:- 1. WPC will be measured and paid separately. 2. Membrane and bitumen primer should be the same manufacturers.

Supply only liquid water proofing compound complete all as specified and as directed.

S & F of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.

M & L for 18/19mm thick prelaminated particle board,interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S & F of 30mm wide continuous (piano) hinges, mild steel, bright finish or electroglavanised complete all as specified and as directed.

S & F of 150 mm extruded brass handles, fabricated type, polished bright complete all as specified and as directed.

S & F of 100mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F of ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

M & L for 2nd class softwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads,sectional area not exc 3 sq cm complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

M & L for brickwork with fly ash old size bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

M & L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M & L for preparation of new undecorated plastered or un plastered surfaces of walls and applying three coat of white wash on walls complete all as specified and as directed

M & L for 25 mm thick, PCC (1:2:4) type B0 using 12.5 mm graded stone aggregates as in levelling course complete all as specified.

M & L for coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and as directed.

M & L for coloured Glazed ceramic tiles in vertical surfaces 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

S & F of powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (mimimum thickness of powder coating 50 micron) complete all as specified and as directed.

S & F of powder coated anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos 125mm size and hinges 3 nos type B-21, 100mm size in each shutter anodised aluminum snap beading screws etc. complete all as specified and directed.

S & F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings for each shutter such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) handle 125mm size (1no.) complete all as specified and as directed. (Note for item no 63.00 to 64.00 :- Minimum thickness of powder coating shall be 50 micron.)

S & F of figured sheet glass 5.0 mm thick, pin head type and glazing with oil putty in square n.exc 0.5 sq. m in each pane complete all as specified and as directed.

S & F of single Piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings Size: 360x725 x735 mm, S Trap-300 mm white with combined flush tank (Cascade type) incl seat covers complete. Make : SLS-WHT-6855SUF of Jaquar or equivalent in any of the make mentioned in list of product .

Supply and fixing vitreous china under counter wash basin with fixing accessories, oval shape white of size 595 x 420 x 200 mm, incl 32mm dia brass chromium plated waste coupling(Make :ALD-705) and cast iron brackets complete all as specified and as directed Make : CNS-WHT-705 of Jaquar or equivalent in any of the make mentioned in list of product .

S & F of Chromium plated health faucet with 1.20m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe or 2 in one tap complete all as specified and as directed. Make: ALD -563 Jaquar or equivalent in any of the make mentioned in list of product .

S & F of 15mm bore brass C.P Central Hole Basin Mixer Without Popup Waste System With 450mm Long Braided Hoses screwed down for 15mm dia iron pipe complete all as specified and as directed. Make : FLR-5167NB of Jaquar or equivalent in any of the make mentioned in list of product .

S & F brass chromium plated two in one tap screwed for 15mm dia bore iron pipe complete all as specified and directad Make: FLR-5041N of Jaquar or equivalent in any of the make mentioned in list of product .

S & F of brass chromium plated angular stop cock with wall flange screwed for 15mm dia bore iron pipe complete all as specified and directad Make: FLR-5053N of Jaquar or equivalent in any of the make mentioned in list of product .

S & F of looking mirror bevelled edge of size 900mm x 600mm, 4.0 mm thick mounted on 6mm thick plywood/asbestos sheet/ building board complete all as specified and as directed.

S & F in repair of CP Grating with hole /with out hole of dia 125 mm dia complete all as specified and directad.

S & F of corner glass shelf with bracket complete all as specified and directad. Make : ACN-1173 of Jaquar or equivalent in any of the make mentioned in list of product .

S & F of brass chromium plated toilet roll holder with flap complete all as specified and directad. Make : AKP - 35753P of Jaquar or equivalent in any of the make mentioned in list of product .

S & F of brass chromium plated single towel rail 600mm long complete all as specified and directad. Make : ACN - 1111 SM of Jaquar or equivalent in any of the make mentioned in list of product .

Supply and fixing in repairs Vitreous China Urinal, Half stall type,white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

S & F of rotational moulded polythene water storage tank (cylindrical vertical with closed top) triple layered, ISI marked hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and directed.

S & F of gun metal, globe or gate valves for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed.

S & F of PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

M & L for PVC (SWR) floor trap 75mm diameter of outlet,plain with grating incl jointing with solvent cement complete all as specified and directed.

S & F of 15mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc conclead complete all as specified and directed.

S & F of 20mm dia medium grade GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc. concealed complete all as specified and directed..

S & F of PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F of PVC (SWR) bends any radious 75 mm dia complete all as specified and directed.

S & F of PVC (SWR) 75mm bore 'T' equal or unequal complete all as specified and directed.

S&F of PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F of PVC (SWR) 110mm bore 'T' equal or unequal with access door complete all as specified and directed.

S & F of PVC (SWR)vent cowl of 110 mm bore complete all as specified and directed.

S & F of PVC (SWR) bends any radius 110 mm dia complete all as specified and directed.

M & L for point wiring for one light/one fan controlled by one switch with 1.5 sqmm insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)(Make of 1.5 sqmm copper wire:

All as per srl item No 96.00 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per srl item No 96.00 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)

S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin 5 amps flush type 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

Supply and fixing ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S & F LED smart Lamp, B22 type ,14 watt,complete all as specified and directed.

Supply and fixing, testing and connecting the BEE rated 5 star ceiling fan 230 volts,single phase of 1200 mm sweep double bearing type, copper winding, Air delivery 230 m3/min including down rod,canopy cover etc and connecting with flexible copper conductor of 3 core 1.50 sq mm and including writing of MES No with black enamelled paint 2cm high complete all as spd and directed.

S & F energy saving decorative LED box type (4 Feet), 230 volts, light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as spd and directed. Make of LED Fitting:- CROMPTON DMLN1LT8-16 or technocommercially equivalent in any of the make mentioned in list of product .

S & F energy saving Led Rod 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light complete all as spd and directed. Make of LED Rod:- CROMPTON LTT8-20or technocommercially equivalent in any of the make mentioned in list of product .

S & F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.

M & L for MCB SP 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables complete all as specified and directed by Engr-in-charge.

M & L for SPN 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables complete all as specified and directed.

S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including bracket of size 32 mm dia GI pipe light weight bent to shape having length not less than 1.5 mtr fixing with clamp made out of 40x3 mm FI, bolt, nuts, washers etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed. Make: CROMPTON CAT REF. LSTS-25-CDL or technocommercially equivalent in any of the make mentioned in list of product .

M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh, 15cm thick layer of charcoal & salt packed around the earth plate. Earth pit of PCC (1:2:4) nominal mix and precast manhole cover RCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).

S&F of Storage type Electric water heater (Geyser) capacity 25 litrs BEE 5 Star rating with complete accesoiries complete all as specified and directed.

S&F of stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore dia of pipe complete all as specified and directed.

S& F of Bib taps cast copper alloy, fancy type with crutch or butter fly handle, screwed for 15mm dia pipe complete all as specified and directed.

S&F of PVC connection for hot & cold water 15mm dia 450 mm long with brass adaptors complete all as specified and directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing MS ventilating fans, Single phase, 230 volts 300 mm sweep or 12 H.D EX Fan (900 RPM) complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed.

S & F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

M&L for Sand cushioning for under ground cable upto 8 cm before laying the cable and 15 cm after laying and stretching the cable and punned down upto 18cm to form a bed. The punning shall be done by hand complete all as specified and directed. Note:- Punned thickness 18cm shall measured for payment.

Material and labour for sub class 'B' bricks well burnt old size laid dry flat perpendicular to the length of cable for protection of cable complete all as specified and directed.

Supply and fixing of GI tubing medium grade of 40 mm nominal bore of pipe in trenches/under roads/ under culverts/under paths/under floor/on walls /with pole in new position with screwed sockets joints, together with all tube fittings (such as bends, elbow, tees, short places connections back nuts, diminishing places, caps, plugs and union etc) complete all as specified and directed .

Supply, laying & testing of XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 Volts grade, of size 16 Sqmm 2 core complete all as specified and directed. Note:- Earth work including excavation, returning filling , removing, sand cushioning, GI pipe,brick covering for mechanical protection of cable etc will be measured and paid separately under respective items of schedule.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Nil). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249.

kay gee construction co

VIKRAM SINGH MANHAS

M/s. G M Builders & Contractors