PROVN OF SIX GUARD REST ROOMS FOR WATCH TOWERS AT CSD DEPOT AT PALLAVARAM CANTT CHENNAI

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge

Earthwork in excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan ) including getting out and disposal of excavated earth lead upto 50 m and lift exceeding 1.5m or part thereof in depth, as directed by Engineer-in-charge

Materials and Labour for Plain cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified.

Materials and Labour for reinforced cement concrete design mix M-30 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs under reamed pillars and mass concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work, rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressummers,lintels, cantilevers,shelves,incl supports overhangs etc,also splays between floors and beams, etc rough finished surface of concrete flat complete all as specified and as directed.

M&L for reinforced cement concrete RMC design mix M-30 using 20mm graded stone agg as in beams, cantilever, lintels column pillars, piers, posts,struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs, folded plates, slabs, balconies, canopies deck slab etc or in similar articles upto 5th floor level, complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slab, floor slab, landings, and similar work not exc 200mm thick, rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to Fins, louvers, fascia etc, rough finished flat surfaces of concrete flat complete all as specified and as directed.

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surfaces of concrete flat complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and as directed.

Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips., complete all as specified and as directed.

Mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Materials and Labour for precast cement concrete block masonry (1:3:6) type C1 using 20 mm graded stone aggregate with solid blocks, exc10 cm in width, set in cement mortar (1:6) in wall complete all as specified and directed.

Materials and Labour for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar1:4,complete, in walls type B1 1:2:4 (20mm graded aggregate), complete all as specified and as directed.

M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 Type B 0 complete all as specified and as directed.

M&L for Anti-Termite Treatment treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area all as specified and directed

Material and Labour for Anti-Termite Treatment Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) all as specified and as directed

Material and Labour for Anti-Termite Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimetre wall complete all as specified and as directed

Material and Labour for Anti-Termite Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

Material and Labour for Anti-Termite Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F Pressed steel frames size of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified and as directed

Materials and Labour for precast cement concrete for chowkat backside filling (1:3:6) type C1 using 20 mm graded stone aggregate with solid blocks, exc10 cm in width, set in cement morter (1:6) in wall complete all as specified and directed.

Supply and fixing 35 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.

M&L for 35mm thick 2nd class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames all as specified and as directed by the Engineer-in-Charge.

S&F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc (powder coating th not less than 50 micron). complete all as specified

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

M&L for Window sheet glass,4mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

M&L for Window sheet glass,4mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc. complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 200 mm complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150 mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.length of bolt 250 mm, complete all as specified and as directed.

S & F mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 150mm complete all as specified and as directed.

S&F brass Mortice lock 100mm vertical type, 4 levers, complete all as specified and as directed.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Materials and labour for 75 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in sub-base of floors finished the surface of concrete even and rough complete all as specified and directed.

Materials and labour for 25 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in sub bases of floor finished even and rough, complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15mm thick screed bed in cm 1:6 complete all as specified and as directed

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match the tiles over and including 15mm thick screed bed in cm 1:6 complete all as specified and as directed

M&L Glazed ceramic tiles in vertical surface 350x 250x 7mm/450X 350X 7mm thickset and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick screed bed/backing coat in cm 1:3 complete all as specified and as directed

M&L for rendering 5mm thick on fair faces of brickwork or concrete surfaces in CM 1:4 with WPC over incl 10mm thick backing coat CM 1:6 finished even & smooth without using extra cement, complete all as specified and as directed (Note : WPC will be measured and paid separately)

M&L for Rendering 10mm thick on walls on fair faces of brick work or concrete surfaces in Cement mortar 1: 6 and finishing the surfaces even and smooth without using extra cement all as specified and as directed by the Engineer-in-Charge.

M&L for Rendering 5 mm thick in Cement mortar 1: 3 on ceiling and finishing the surfaces fair and even without using extra cement all as specified and as directed by the Engineer-in-Charge.

M&L for 10mm rendering on concrete (roof) surface in CM 1:3 using WPC finished even and smooth without using extra cement complete all as specified and as directed. (Note:-WPC will be measured and paid seperately)

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor/plinth protection , finish even & smooth without using extra cement all as specified and directed.

M&L hardcore of broken stones of gauge n exc 63mm, deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to true surface all as specified.

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface drain pipe finished even and smooth without using extra cement, complete all as specified and as directed.

S&F for PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F for PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Material and Labour for plain cement concrete (1:2:4) type B1 using 20mm graded stone agrregate as in coping, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer , complete all as specified and as directed.

M&L two coats of oil bound distemper over a coat of primer over a coat of wall care putty 3mm thick on newly plastered wall surfaces and including preparation of surface complete all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS 15489:2004., alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm over new surface complete all as specified.

M&L two coats of oil bound distemper over a coat of primer over a coat of wall care putty 3mm thick on newly plastered ceiling surfaces of including preparation of surface complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising following course of treatment/specification from bottom to top:- Applying bituminious primer @ 0.04 litre per Sqm over cleaned, roughened and dry roof surfaces including parapet surfaces. Note: Bituminious primer shall be "Tank Mastic" manufactured by M/s STP Limited or "Emufalte" manufactured By M/s Texa India limited and providing 3mm thick APP Modified water proofing membrane weighing not less than 3.0 Kg/Sqm reinforced with non woven polyster matt not weighing less than 150gm/Sqm all as per the detailed specifications and manufacturers instruction. Note: (i) Laying APP based polymeric membrane shall be done torch on method as per manufacturer's instruction (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrqane respectively and sealed all overlaps and joints as per manufacturer's instruction (iii) APP based polymeric membrane shall be "Super Thermolay" manufactured by M/s STP limited or "Super thermolay" manufactured by M/s STP limited or 'MolyFP 3mm' manufactured by M/s Texa India Ltd or equivalent

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement,complete all as specified

M&L for PVC (SWR) multi floor trap 100mm dia with CP grating including jointing with solvent cement complete all as specified and as directed.

Supply and fixing Vitreous China wash down water closet Orissa pan white 580x440mm with integral foot rest and "P" or "S" Trap,including provision of lime or concrete, (excluding flushing cistern and flush pipe), complete and making all necessary connection, complete all as specified and as directed

S&F PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with inlet, ball valve, float & handle including brackets, complete all as specified and as directed

Supply and fixing Vitreous China wash basin, white, flat back, size 550x400mm with coupling including brackets white, complete all as specified and directed.

S&F for 15 mm bore CP pillar tap chromium plated long neck with aerator fancy type with crutch handle screwed down high pressure with long screwed shanks and fly nuts srewed for iron pipes or for brass ferrule complete all as specified and as directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed.

S&F 20mm dia tubular 'D' type Towel Rail 600mm long of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 500 ltr capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm brass float valve & necessary fittings complete all as specified and as directed.

S&F 25mm dia Nipple suitable for HDPE water tank.(Minimum weight 15mm 38gms/20mm-45gms /25mm- 65gms) complete all as specified and as directed.

Supply only liquid water proofing compound for plaster complete all as specified and as directed.

Returning ,filling to foundation including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick complete all as specified and as directed.

Soil filling under floors Spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required complete all as specified and as directed.

Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and as directed.

S&F for PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed on wall, complete all as specified and as directed.

S&F for PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and as directed.

S&F for PVC (SWR) 75mm dia junction (single T), equal or unequal with access door, complete all as specified and as directed.

S&F for PVC (SWR) 110mm dia junction (single T), equal or unequal with access door, complete all as specified and as directed.

S&F for PVC (SWR) 75mm dia vent cowl, complete all as specified and as directed.

S&F for PVC (SWR) 110mm dia vent cowl, complete all as specified and as directed.

S& F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays for 75mm bore pipes, including bolts and nuts and secring end of stays to wall or roof, complete all as specified and as directed.

S& F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays for 100mm bore pipes, including bolts and nuts and secring end of stays to wall or roof, complete all as specified and as directed.

S& F 50mm dia High density polyethylene pipes (HDPE of pressure rating 6kg/cm2, fixed to wall complete all as specified and as directed.

M & L for bands straps or stays for rain water pipes, ventilator pipes, including bolts in required: hooks (stays) heavy, for large gate, hook and pintel hinges: large Hasp & stapples : chains hand made sliding bolts: clamps: holdfasts; wall ties ; hooks for hanging fans; plain angle cleats for securing purlins to wood truss or rafters; knee pieces inserts; two way or three way straps, plate washers and similar small articals conforming to FE- 290Gde-E-165 for Rungs, complete all as specified and as directed.

M & L for painting with one coats of synthetic enamel paint including necessary preparation, small articles such as metal switch blocks, metal ceiling roses, articles of builders hardware such as door springs, hooks, knobs, fasteners, stays, locks, latches etc., straps to roof trussess, gates and similar articles when unconnected with other painting or panited in different tint, complete all as specified and as directed.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Cutting chases, pinning in concrete /pcc block masonry walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified

Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying of 20x15mm brass bend complete all as specified

Supplying and fixing of 20mm brass Tee complete all as specified

Supplying and fixing of 25mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed

Supplying and fixing of 25mm Union complete all as specified

Supplying and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supplying and fixing CP brass 15mm Stop valves fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed

Supplying and fixing CP brass 15mm Bib Tap, Fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed

Supplying and fixing Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union , complete all as specified and as directed

Supplying and fixing CP brass 15mm concealed Stop valves fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

Supplying and fixing 15mm dia PVC connection pipe 450mm long with PTMT nut , complete all as specified and as directed

Supplying and fixing 1000 Litres PVC septic tank black colour, horizotal type inlet center from top 115mm outlet center from top 160mm thickness of pipe 100mm, Make Sintex complete all as specified and as directed

M & L for RCC Pipes 150mm bore of class NP-3, laid and jointed complete with collars , complete all as specified and as directed

M & L for Concrete bed to drain pipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested; in in cement concrete 1:4:8 Type C2 (using 40mm graded stone aggregate , complete all as specified and as directed

Earth work in excavation in any type of soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 meters directed by Enginner-in-charge

M & L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius using old size bricks built in CM 1:6, complete all as specified and as directed.as directed by Enginner-in-charge

M & L for cement concrete 1:3:6 type C1 as in , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed.as directed by Enginner-in-charge

M & L for 10mm thick rendering in CM 1:4 using liquid water proofing compound, finshied even and fair without using extra cement, complete all as specified and as directed. (Note : WPC will be measured and paid separately)

M & L for cement concrete 1:3:6 type C1 as in ,cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:6, as directed complete all as specified and as directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100mm internal dia of pipe, complete all as specified and as directed.

M&L for point wiring of size 1.5 sqmm with PVC insulated unsheathed multistranded copper conductor cabel of 1100V grade drawn through new non metallic rigid PVC conduit including accessories,including cutting/chasing concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for complete for :- (a) one light point controlled by one switch

(b) one fan point controlled by one switch

As per above items No 113 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

S& F for modular cover plate with frame 3 module complete all as specified and directed by Engr-in-Charge

S& F for modular cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge

S& F for modular cover plate with frame 6 module complete all as specified and directed by Engr-in-Charge

S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed by Engr-in-Charge

S&F modular fan step regulator suitable for type AC 240V, 2 module complete all as specified and directed by Engr-in-Charge

S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed by Engr-in Charge

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers , complete all as specified and directed

S & F 15 Watts round ceiling COOL LIGHT , functional range of aesthetically designed surface mounted downlights with aluminium housing and heat sink for better thermal performances, complete all as specified and as directed by the Engr-in-Charge. Make : Bajaj(Cat No.BGSLO SLEEK SURFACE 15W WH RD LED ) or equivalent of Havells/Philips.

S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminium housing with wide range of wattages to suite variety of application areas, complete all as specified and directed by the Engr-in-Charge. Make : Bajaj( Cat No. BCLAB 20W LED P) or equivalent Philips/Bajaj.

S&F 45 Watts New generation energy saving and environmental friendly long life LED Bldg Security light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. Available in CCT 5700 k & 3000K, all as specified and directed by Engr-in-Charge. Make : Bajaj(Cat No. NEXO 54L WH PO TG SD J ) or equivalent of Havells/Philips.

Supply and fix on pole/wall GI pipe bracket made out of 40mm bore light grade GI Pipe 1.2 M long bent to shape and fixed on pole/wall with 2 Nos MS clamps made out 25x3mm flat iron including bolts, nuts, and washers etc., complete all as specified and as directed

Excavating in trenches not exceeding 1.5 meter wide and n. exc. 1.5 meter in depth for foundation for erection of poles, stays, laying pipes, cables, stays etc., and getting out in soft/ loose soil all as specified and directed.

Returning, filling in trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cms in soil complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection complete all as specified and directed

S&F MCB SPN 32 Amps 415 Volts complete all as specified and directed by Engr-in Charge

S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts complete all as specified and directed by Engr-in Charge

Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4 mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified inlcuding testing on completion.

Cutting existing GI water tubing in position for insertion of Tee of 80 x 80 x 25 mm size for bore of pipe GI 80 mm including excavation complete all as specified and directed

Supply and lay galvanised steel water tubing 25mm bore medium grade with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc., laid in trenches complete all as specified and directed.

Supply and lay galvanised steel water tubing 25mm bore medium grade with all fittings such as bends, tees, unions, elbows, connecting pieces, plugs, sockets etc.,fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fix 25mm boreGun metal globe / Gate valve conforming to IS 778-1984 with iron wheel head, screwed both ends for GI pipe including all fittings/ fixutres like nipple, union etc, complete all as specified and directed.