Electrical work at Hosur auto tipper vehicles parking area Hubballi.

Electrical work at Hosur auto tipper vehicles parking area Hubballi.

Fabricating supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft IS 2062 for base plate with door opening arrangements inc...

Fabricating supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft IS 2062 for base plate with door opening arrangements inc...

Supplying and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts nuts etc. complete. 4.6.1) Single Arm Bracket with 1000 mm S...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 1984 and Virgin PVC insulation sheathed suitable for workin...

Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010.

1.1Kv XLPE or Heat resistant PVC insulated PVC Extruded Inner sheath Armoured LT UG cable as per IS 1554 part 1 or IS 7098 Part 1 Armouring strip thickness and resistivity as per IS 3975. 32...

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits depositing on bank upto a lead of 50 Mtr Supplying and Displaying necessary Danger Boards and...

Laying of cable in Existing Trench orGI pipe orStoneware orRCC Hume pipe using wooden orAluminium Rollers as directed by department staff. 2.5 to 25Sqmm. 167 21.05) 2.5 to 25 Sqmm (Single/3.5/4 Core)

HDPE PLB Pipe 40/33 mm ESCOMs SR 2023-24 Page No 366 Item No 66.05

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve indicator ON orOFF energy cross 3 with Short circuit breaking ca...

Supplying&fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materials and 'C' Type

curve, indicatorON/OFF, energycross-3 withShort circuitbreaking capacityof...

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

Supplying, Fitting and Placing TMT Fe 500 & above Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. Vol 3 - SR for Roads & Bridges 2023-...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

SupplyofLEDStreetlightluminairewithpressurediecastaluminiumhousingbodyforoptimalthermaldissipation.LampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonatematerial,delivering...

SupplyofLEDStreetlightluminairewithpressurediecastaluminiumhousingbodyforoptimalthermaldissipation.LampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonatematerial,delivering...

SupplyofLEDStreetlightluminairewithpressurediecastaluminiumhousingbodyforoptimalthermaldissipation.LampcompartmentcomprisingofantiglarecleardiffuserwithInjectionmouldedpolycarbonatematerial,delivering...

Fixinghalogen/metalhalide/SVL/IL/LEDfloodlightfittingoverexistingpole/wallceilingincludingclamps,bolts,nutsandwiringusing suitable capacity wires.

Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches regulators etc. and fixing on existing wood or metal box using N.F. screws.

Supplying and fixing of Porcelain fuse channel with cut out on existing wooden orpanel using necessary nuts bolts and washers. 5.7.2 32Amps PWD SR 2023 24.

Contactor Switch Supply and fixing of 4pole power contactor with NO orNC contacts on existing wood orpanel board using necessary bolts nuts washers and wiring etc. complete with AC 3 Rating and as per...

MCB Switch Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve indicator ON orOFF energy cross 3 with Short circuit ...

Timer Switch Supplying and fixing Microprocessor based Electronic timer without contactor Din Mounting using necessary bolts nuts and washers etc. . 3 120sec setting.

MS Box abricating supplying and mounting MS box made out SWG suitable for floor or wall mounting fully weather proof with provision for better heat dissipation provided with hinged front cover equippe...

Releasing & Refixing of Over Head Service Mains (Single Phase/3 phase) Per connection/installation (While replacing existing Pole)

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., Basic Rate:656

Releasing of RCC/PSCC Poles 9/8Mtr of 90% of the Pole erection charges.

Releasing of Conductor. 7.04) Rabbit

Releasing of Conductor.7.03)Weasel

Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., 5.01)Fixing of 2 Pin cross arm with Insulator and Braces fixing

Fixing of Cross Arm, Single Top Support, EG Stirrup, Anticlimbing Device, Guy Set, Guarding etc., 5.02)Fixing of 4 Pin cross arm with Insulator and Braces fixing

68.06) Cable Covering Tile 125x250x40 mm

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 32.04) ...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.

66.04) HDPE/PLB Pipe 50/42 mm.

51.01)GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer completeMinimum Weight of GI Pipe: 7.3 Kg

51.02) Pipe Grounding Basic Rate:676

Good Quality well burnt Charcoal for grounding

purposes packed in non returnable gunny bag of 30 Kg each

51.03) Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

Digging of Pit for providing GI Pipe type Earthing. 1.6.4) Hard Rock

30.01) 8 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2(Refer Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018)

LT Feeder piller box (MS & Thermoset Plastic Enclosure) including necessary civil works like soil excavation & concreting etc. complete

9.04) above 8 Ways (MS Enclosure)

34.12) 240 Sqmm, 3.5/4 Core. Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573

35.04) 3.5 x 225/240/300 Sqmm Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable

22.15) 120 to 240 Sqmm Heat shrinkable Type Terminations

60.12) 240 Sqmm Aluminium End Terminal (Lug)

60.02) 16 Sqmm Lug

Aluminium End Terminal (Lug)

68.08) Route & Joint indicating slab with MS Anchor rod

63.01) 25 mm Brass Cable Gland Basic Rate:79

21.05) 2.5 to 25 Sqmm Labour Charges Laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required

21.07) 120 to 240 Sqmm Labour Charges Laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 31.05 ) 2.5 to 25 Sqmm

Supplying, erection, testing and commissioning of .KVA Diesel Generating Set on existing CC platform Comprising of Diesel Engine Developing . BHP @ 1500 RPM confirming to BS 5514.The engine should be ...

Supplying,erecting,testing&commissioningofOFF-LINEUPSsystemsuitableforoperationon230V,50Hz,A/Csupply,withallaccessories complete and Excluding batteries and wiring complete.

9.2.5) 5 kVA OFF LINE ...

9.5) Supplying,installation,testing & commissioning of 12V DC, AH batteries in polypropylene container for U.P.S.Sealed maintenance free batteries.

9.5.7) 100 AH capacity

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping casing capping using 2x1.5mm2

(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi

strand PVC insulated copper wire (...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping casing capping using 2x1.5mm2

(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi

strand PVC insulated copper wire (...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping casing capping using 2x1.5mm2

(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi

strand PVC insulated copper wire (...

Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010

Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010. 2.3.2) 1.5 mm2

Wiringforlighting/powercircuitusingoneofFRLSPVCinsulated1100Vgrade,multistrandcopperwirewithlowconductorresistancesinglecoreinopenorconcealedsystemofwiringwithspecifiedIS-694:2010. 2.3.3) 2.5 mm2

1.9)SupplyingPVCflexibleconduitpipe.mmdiafixingonsurfaceoverinvertedtaperedwoodenplugsorphillplugsorrawlplugsandclampedusingheavygaugesaddlesatanintervalof300mmusigNFscrews and on either end of the pi...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with

required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.

3.6.1)6A One Way Switch.

Supplying and fixing of modular switch & connected accessories

on existing modular switch plate as per IS 3854 and IS 1293

3.6.3) 6A Three Way socket.

3.6)Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

3.6.7) 16A One Way Switch

3.6)Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293. 3.6.10) 6/16A Universal Socket

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with

Short circuit breaking capa...