REPAIR MAINT TO BRICK WORK PLASTERING JOINERY HARDWARES ETC AND CONNECTED BR WORKS OF MARRIED OFFRS ACCN AND CERTAIN WATER SUPPLY COMPLAINT WORKS UNDER GE I GOS

Amount

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches pillar etc complete all as specified and directed.

M&L Old size Brick work with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Old size Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for Rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered wall surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete.

M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered ceiling surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old Ceiling surfaces including complete removal of existing Ceiling finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on Ceiling surfaces over & including a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed.

M & L for two coats of cement based paint over a coat of primer on new plastered surface of walls including preparation of surface complete all as specified and directed.

M&L for Complete removal of existing treatment and applying two coats of OBD over a coat of alkali resistant primer on wall complete all as directed by Engineer-in-Charge.

M&L preparation of old painted surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M&L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and as directed.

M&L preparation of old painted surfaces and applying one coat of oil bound distemper on walls complete all as directed.

Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete all as specified and directed.

M&L for preparation of old wood or wood based surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of old decorated wooden painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repairs door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight between 36 to 60 Kg of aluminium (Die cast) body complete all as specified and directed.

S&F in repairs Aluminium Mortice lock 2 lever, vertical type, size 100 mm with escutcheon plates and two keys complete all as specified and directed.

S&F in repairs Aluminium Mortice lock 4 lever, vertical type, size 100 mm with escutcheon plates and two keys complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

Taking down shutter of any description exceeding 1 sqm but not exiding 2 Sqmeach leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed

S&F in repair 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S&F in repair 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed

S&F in repair 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.

S&F in repairs 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin headed type and gazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repairs door seal with aluminium beading and 50 mm wide rubber seal complete fixed to aluminium/ Wooden doors complete all as specified and directed.

S&F in repair Stainless steel fancy type curtain rod 25 mm dia as approved complete all as specified and directed

S&F in repair SS Curtain rod Bracket fancy type for curtain rod 25 mm dia of any colour as approved complete all as specified and directed.

Attending day to day breakdowns/ complaints of damaged water supply lines in distribution system of DI/CI GI/PP-R Pipe line, restoration of water supply by stopping the leakage occured by deputing skilled /semi skilled man power for smooth functioning of water supply , complete all as specified and directed by Engineer-in-Charge . Bore of the pipe line of 15mm to 25mm

All as per item No 45 above but Bore of pipe line 40mm to 50mm

All as per item No 46 above but Bore of pipe line 80mm to 100mm

All as per item No 46 above but Bore of pipe line 150mm to 200mm

All as per item No 46 above but bore of pipe line above 300mm to 400mm Note for srl item no : 46 to 50 (a) Up to 0.5Cum of the earth work shall be included in the job & more than 0.5 Cum shall be measured and paid separately. (b) The complaint /breakdown shall be rectified by the contractor within 24 Hours.Any delay thereafter,recovery at double the rate quoted per job shall be deducted from the dues of contractor by the Engr-in-charge without any notice. (c) GI fittings like Elbow,union.socket nipple etc..deemed to included the unit rate quoted. Note ; Srl item No : 45 to 49 PP-R pipe upto 2mtr included the unit rate quoted & more than 2 mtr shall be measured and paid separately.

S&F in replacement of sluice valve 300 mm bore class PN - 1.6 with flanged and iron wheel head ,shut and open directed cast on it and including jointing materials,rubber gasket suitable size nut bolts and washer etc complete all as specified and directed. Make :Upadhay/Zoloto/Kirloskar or equivalent

All as per Item No. 51 above but 200 mm bore.

All as per Item No. 51 above but 150 mm bore.

All as per Item No. 51 above but 100 mm bore.

All as per Item No. 51 above but 80 mm bore.

S&F in replacement of NON return valve 100 mm bore class PN - 1.6 with flanged including jointing materials,rubber gasket suitable size nut bolts and washer etc complete all as specified and directed. Make :Upadhay/Zoloto/Kirloskar or equivalent

All as per Item No. 56 above but 80 mm bore.

S&F in replacement of Air release valve 200 mm bore class PN - 1.6 with flanged including jointing materials,rubber gasket suitable size nut bolts and washer etc complete all as specified and directed. Make :Upadhay/Zoloto/Kirloskar or equivalent

All as per Item No. 58 above but 150 mm bore.

All as per Item No. 58 above but 100 mm bore.

All as per Item No. 58 above but 80 mm bore.

M& L for MS/CI/DI fittings up to 150mm bore such as collar, bends (any type radius, any angle, double end socketted or double flanged or spigot & socket, tail pieces (all socketed or all flanged with an equal & other end tapering bellmouth or flanged plates, connecting pieces straight (both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces ( one end flanged & other end spigot or socket or tapering as bell mouth or flanged ) caps blank flanges heavy duty suitable for mechanical joint/flanged joint with and incl taking down old fitting of any type and any size complete all as specified and directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) of size 20 mm dia complete all as specified and directed. Make : Prayag/Polytuf

All as per Item No 63 above but 25mm dia

M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 80 mm bore dia of CI/DI pipe. Including Taking up or down old u/s joint all as specified and directed.

All as per item No 65 above but 100 mm bore dia

All as per item No 65 above but 150 mm bore dia

All as per item No 65 above but 200 mm bore dia

Excavation of trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for taking out/laying of pipe lines and getting out forming bottom surfaces to required gradients complete all as specified and as directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed

Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr. Above starting point complete all as specified and directed.

Taking down / removal of any damaged water point line from the position and connecting the pipe line 15 mm/20mm/25mm bore by providing new GI nipples, GI unions and GI sockets including exacavation and earth work , filling & good distributed surfaces all as specified and directed .

M&L cutting hole in RCC service tank removing rusted GI nipple of any size, providing new GI nipple of same size of providing pipe, making good to service tanks, making service tanks leak proof complete as directed

Taking up PPR/GI Pipe of 63MM OD Cleaning and removing mud,sand and stone Inside the pipe and Relaying the same complete all as specified and directed. Note: Earth work will be measured and paid for separtly.

All as per Item No. 74 above but 50 mm OD.

Taking Down unserviceable GI/PPR pipes and S&F 3-layer PP-R polypropylene random copolymer concealed pipe (PN 16/SDR 7.4) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc of size 63 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

All as per Item No. 76 above but of size 50 mm OD.

All as per Item No. 76 above but of size 32 mm OD.

All as per Item No. 76 above but of size 25 mm OD.

S&F in repair of PP-R gate valves(brass inlet) as per requirement of size 63 mm OD complete all as specified and directed. Make : SFMC or equivalent in approved by E-in-C

All as per Item No. 80 above but 50 mm OD.

All as per Item No. 80 above but 32 mm OD.

All as per Item No .80 above but 25 mm OD.

S&F foot valve 150 mm dia CI/GI/DI with complete fittings including taking out old unsv complete all as specified and directed.

S&F foot valve 100 mm dia CI/GI/DI with complete fittings including taking out old unsv complete all as specified and directed.

S&F foot valve 80 mm dia CI/GI/DI with complete fittings including taking out old unsv complete all as specified and directed.

M/S. KISHAN ENGINEERING (BID ID -3137059)

M/s M M Engineering Systems (BID ID -3135414)

M/S.J.BIJAYA KUMAR PATRO (BID ID -3136080)

M/S JAGANNATH SASMAL (BID ID -3134506)

R K Traders (BID ID -3134773)