REPAIR/MAINT OF WATER SUPPLY DISTR PIPE LINE OTHER CONNECTED WORKS AT INS CHILKA UNDER GE CHILKA

Amount

Excavation in trenches not exceeding 1.5 m wide and 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

Returning ,filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 mm thick in soft/loose soil complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Taking down and Re-fixing only old serviceable 50 mm bore steel tubing including new fittings such as bends, elbow, reducer, socket etc in new or old position on wall ,floor, in trenches etc complete all as specified and directed

Taking down and Re-fixing only old serviceable 40 mm bore steel tubing including new fittings such as bends, elbow, reducer, socket etc in new or old position on wall ,floor, in trenches etc complete all as specified and directed

Taking down and Re-fixing only old serviceable 25 mm bore steel tubing including new fittings such as bends, elbow, reducer, socket etc in new or old position on wall ,floor, in trenches etc complete all as specified and directed

Taking down and Re-fixing only old serviceable 20 mm bore steel tubing including new fittings such as bends, elbow, reducer, socket etc in new or old position on wall ,floor, in trenches etc complete all as specified and directed

Taking down and Re-fixing only old serviceable 15 mm bore steel tubing including new fittings such as bends, elbow, reducer, socket etc in new or old position on wall ,floor, in trenches etc complete all as specified and directed

Taking up or down 80 mm bore old cast iron or ductile iron pipe with existing fitting from trenches complete all as specified and directed. Note:- Excavation and earth work if required shall be measured and paid seperately.

Taking up or down 100 mm bore old cast iron or ductile iron pipe with existing fitting from trenches complete all as specified and directed. Note:- Excavation and earth work if required shall be measured and paid seperately.

Taking up or down 150 mm bore old cast iron or ductile iron pipe with existing fitting from trenches complete all as specified and directed. Note:- Excavation and earth work if required shall be measured and paid seperately.

Fixing only old serviceable 80 mm bore cast iron or ductile iron pipe after cleaning obtained from taking down in new or old position including jointing materials so required complete all as specified and directed . Note:- New fittings if required shall be measured and paid seperately under respective item

Fixing only old serviceable 100 mm bore cast iron or ductile iron pipe after cleaning obtained from taking down in new or old position including jointing materials so required complete all as specified and directed . Note:- New fittings if required shall be measured and paid seperately under respective item.

Fixing only old serviceable 150 mm bore cast iron or ductile iron pipe after cleaning obtained from taking down in new or old position including jointing materials so required complete all as specified and directed . Note:- New fittings if required shall be measured and paid seperately under respective item

Supply, laying ,jointing and testing 80 mm bore ductile iron spigot and socket pipes conforming to IS:8329/2000 Class K-7 including EPDM rubber gasket suitable for push on rubber gasket joint complete all as specified and directed. Make :- Electro steel casting Ltd/Tata Kuvoto /Jindal

Supply, laying ,jointing and testing 100 mm bore ductile iron spigot and socket pipes conforming to IS:8329/2000 Class K-7 including EPDM rubber gasket suitable for push on rubber gasket joint complete all as specified and directed. Make :- Electro steel casting Ltd/Tata Kuvoto /Jindal

Supply, laying ,jointing and testing 150 mm bore ductile iron spigot and socket pipes conforming to IS:8329/2000 Class K-7 including EPDM rubber gasket suitable for push on rubber gasket joint complete all as specified and directed. Make :- Electro steel casting Ltd/Tata Kuvoto /Jindal

S&F in replacement of 150 mm bore cast iron foot valve both ends flanged with necessary jointing material such as nuts ,bolts, washers as required complete all as specified, directed. Make:-Zoloto/Leader/Kartar

Supply only cast iron fittings such as bends (any type, radius any angle) tapers any type (straight or bend), increasing, decreasing or double socket etc, Tee pieces, single branch or double branch,cross(all sockets and socket and spigot) collars, caps and plugs tail piece confirming to IS 1538/1993 complete all as specified and directed.

Supply, laying ,jointing and testing in replacement 50 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc in trenches complete all as specified and directed.

Supply,fixing ,jointing and testing in replacement 50 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc to walls and ceiling or laying in floor complete all as specified and directed.

Supply, laying ,jointing and testing in replacement 40 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc in trenches complete all as specified and directed.

Supply,fixing ,jointing and testing in replacement 40 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc to walls and ceiling or laying in floor complete all as specified and directed.

Supply, laying ,jointing and testing in replacement 25 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc in trenches complete all as specified and directed.

Supply,fixing ,jointing and testing in replacement 25 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc to walls and ceiling or laying in floor complete all as specified and directed.

Supply, laying ,jointing and testing in replacement 20 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc in trenches complete all as specified and directed.

Supply,fixing ,jointing and testing in replacement 20 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc to walls and ceiling or laying in floor complete all as specified and directed.

Supply, laying ,jointing and testing in replacement 15 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc in trenches complete all as specified and directed.

Supply,fixing ,jointing and testing in replacement 15 mm bore galvanised iron pipe , medium grade including fittings such as bends,socket, reducer, elbows, union etc to walls and ceiling or laying in floor complete all as specified and directed.

S&F in replacement 50 mm bore gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. Make:- Leader/Zoloto/Bir

S&F in replacement 40 mm bore gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. Make:- Leader/Zoloto/Bir

S&F in replacement 25 mm bore gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. Make:- Leader/Zoloto/Bir

S&F in replacement 20 mm bore gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. Make:- Leader/Zoloto/Bir

S&F in replacement 15 mm bore gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. Make:- Leader/Zoloto/Bir

S&F in replacement 15 mm bore bib taps standard of of PTMT any colour high pressure screwed for iron pipe and fixed (minimium weight 90 gms) complete all as specified and directed. Make :- Prayag/Polytuf/Sudhakar

S&F in replacement 40 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 690 gms) complete all as specified and directed.

S&F in replacement 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed.

Disconnecting existing defective electric motor of any make 40 HP from electric mains by isolating the nacked connections, removing from foundation by unscrewing the exisitng nuts,bolts etc ,discoupling from pump, opening motor for inspection in presence of Engineer-in-charge and carry out repair to make it fully functional and refixing in exisitng position, reconnecting and testing including replacement of unserviceable nuts,bolts and washers as required complete all as specified and directed.

Taking out defective pump set of any type and of any make upto 40 HP by unscrewing the foundation bolts, disconnecting water connection and disconnecting form electric motor and openign for inspection in presence of Engineer-in-charge and carry out necessary repair to make it fully functional and refixing in exisitng position, reconnecting and testing including replacement of unserviceable nuts,bolts and washers as required complete all as specified and directed.

S&F in replacement 80 mm bore cast iron sluice valve confirming to IS -14846 PN-1.0 non raising type both ends flanged with SS spindle including jointing materials such as nuts, bolts washers and 3mm rubber gasket 02 Nos complete all as specified and directed. Make :- Upadhaya/Leader/L&T/Zoloto

S&F in replacement 100 mm bore cast iron sluice valve confirming to IS -14846 PN-1.0 non raising type both ends flanged with SS spindle including jointing materials such as nuts, bolts washers and 3mm rubber gasket 02 Nos complete all as specified and directed. Make :- Upadhaya/Leader/L&T/Zoloto

S&F in replacement 150 mm bore cast iron sluice valve confirming to IS -14846 PN-1.0 non raising type both ends flanged with SS spindle including jointing materials such as nuts, bolts washers and 3mm rubber gasket 02 Nos complete all as specified and directed. Make :- Upadhaya/Leader/L&T/Zoloto

S&F in replacement 200 mm bore cast iron sluice valve confirming to IS -14846 PN-1.0 non raising type both ends flanged with SS spindle including jointing materials such as nuts, bolts washers and 3mm rubber gasket 02 Nos complete all as specified and directed. Make :- Upadhaya/Leader/L&T/Zoloto

S&F in replacement 250 mm bore cast iron sluice valve confirming to IS -14846 PN-1.0 non raising type both ends flanged with SS spindle including jointing materials such as nuts, bolts washers and 3mm rubber gasket 02 Nos complete all as specified and directed. Make :- Upadhaya/Leader/L&T/Zoloto

M & L for run lead joints for 250 mm bore pipes and fittings including lead and spunyarn as required complete all as specified and directed

M & L for run lead joints for 200 mm bore pipes and fittings including lead and spunyarn as required complete all as specified and directed

M & L for run lead joints for150 mm bore pipes and fittings including lead and spunyarn as required complete all as specified and directed

M & L for run lead joints for 100 mm bore pipes and fittings including lead and spunyarn as required complete all as specified and directed

M & L for run lead joints for 80 mm bore pipes and fittings including lead and spunyarn as required complete all as specified and directed

M&L for cutting of existing road/ floor/ plinth for taking out or laying of pipe line including necessary excavation and earth work upto 300 mm deep and making good by filling existing material upto 150 mm and with PCC 1:3:6 type C-1 using 20mm graded stone aggregate upto 150 mm complete all as specified and as directed.

Disconnecting electric connection from starter,disonnecting the water connectionby unscrewing the existing nuts,bolts and taking out the submersible pump set 15 HP from the well including column pipes, submersible cable,disconnecting the pump and motor, opening the pump and motor to locate the fault in presence of Engineer-in-charge and carry out necessary repair including rewinding with existing gauge of copper winidng wire including transportaion to the workshop and back , reassembling the same including necessay water and electric connection after relowering pump and column pipe including replacement of new packing ,nuts,bolts and washers as required and testing complete all as specified and as directed.

Taking out existing 80 mm bore sluice valve of any make by unscrewing the bolts, disconnecting from water connection, opening for inspection in presence of Engineer-in-charge and carry out necessary repair to make it fully functional including replacement of gaskets,nuts,bolts including greasing and refixing and reconnecting in position and testing complete all as specified and as directed.

Taking out existing 100 mm bore sluice valve of any make by unscrewing the bolts, disconnecting from water connection, opening for inspection in presence of Engineer-in-charge and carry out necessary repair to make it fully functional including replacement of gaskets,nuts,bolts including greasing and refixing and reconnecting in position and testing complete all as specified and as directed.

Taking out existing 150 mm bore sluice valve of any make by unscrewing the bolts, disconnecting from water connection, opening for inspection in presence of Engineer-in-charge and carry out necessary repair to make it fully functional including replacement of gaskets,nuts,bolts including greasing and refixing and reconnecting in position and testing complete all as specified and as directed.

Taking out existing 200 mm bore sluice valve of any make by unscrewing the bolts, disconnecting from water connection, opening for inspection in presence of Engineer-in-charge and carry out necessary repair to make it fully functional including replacement of gaskets,nuts,bolts including greasing and refixing and reconnecting in position and testing complete all as specified and as directed.

Taking out existing 250 mm bore sluice valve of any make by unscrewing the bolts, disconnecting from water connection, opening for inspection in presence of Engineer-in-charge and carry out necessary repair to make it fully functional including replacement of gaskets,nuts,bolts including greasing and refixing and reconnecting in position and testing complete all as specified and as directed.

Taking out existing 300 mm bore sluice valve of any make by unscrewing the bolts, disconnecting from water connection, opening for inspection in presence of Engineer-in-charge and carry out necessary repair to make it fully functional including replacement of gaskets,nuts,bolts including greasing and refixing and reconnecting in position and testing complete all as specified and as directed.

S&F in replacement 25 mm bore forged brass air release valve including drilling and tapping complete all specified and as directed. Make :- Zoloto/Upadhaya/Leader

Supply and fix three phase direct online starter , 20 - 32 relay in sheeet metal enclosure, 415V, incloding taking out old unserviceable all as specified and directed Make: L&T MK2 DOL or equivalent in ABB/SIEMENS/GE/Cropmton Greaves

Supply and fix three phase direct online starter with single phase protection, 9-15 relay including taking out old unserviceable all as specified and directed. Make: L&T MN 16 DOL or equivalent in ABB/SIEMENS/GE/Cropmton Greaves

Disconnecting electric connection from starter,disonnecting the water connectionby unscrewing the existing nuts,bolts and taking out the submersible pump set 3/5 HP from the well including column pipes, submersible cable,disconnecting the pump and motor, opening the pump and motor to locate the fault in presence of Engineer-in-charge and carry out necessary repair including rewinding with existing gauge of copper winidng wire including transportaion to the workshop and back , reassembling the same including necessay water and electric connection after relowering pump and column pipe including replacement of new packing ,nuts,bolts and washers as required and testing complete all as specified and as directed.

S&F in replacement 80 mm bore cast iron double orifice Air release valve including drilling and tapping complete all specified and as directed. Make :- Zoloto/Upadhaya/Leader

S&F in replacement 150 mm bore cast iron double orifice Air release valve including drilling and tapping complete all specified and as directed. Make :- Zoloto/Upadhaya/Leader

M/S KAMAL KEE ENGINEERS WORK (BID ID -3108980)