SITC OF THE LATEST VERSION OF RFID-BASED AUTOMATION SOLUTION FOR LIBRARY MANAGEMENT

Amount

Library Staff Station

a) Read/Write/Anti-theft programming should be done in one single operation. b) Read/Write distance of Up to 25 cm and programming time of 1 second. c) Should be fully ISO/IEC 14443A, 15693 and ISO 18000:3 compliant. d) The programming station should interface with the KOHA Library Management Software using NCIP V2.0 protocol e) Integrated with reader for patron ID Card based ISO/IEC 14443A Mifare Plus to read for circulation f) Integrated with reader for patron ID Card based ISO/IEC 14443A Mifare Plus for personalization of data into the ISO/IEC 14443A Mifare Plus passive contact less 1Kb smart card in the pre-defined location in the memory The details of memory location in smart card will be provided at appropriate time. g) NCIP V2.0 compliance software interface integrated with Koha integrated library management software for all operations like patron card personalization, check-in. check-out, renew, reserve etc of library circulation Specifications : Operating Frequency:: 13.56 MHz Power Supply:: 5V to 12V Power Consumption:: 1.2W Minimum Transmitting Power:: 1W Minimum Read Range:: Up to 25 cm Antenna:: Internal Communication Interface:: USB/RS232/Ethernet Supported Transponders:: ISO 15693, ISO 14443A and ISO 18000:3 Indicators:: LED / Buzzer for power, read verification etc. Operating Temperature:: -10°C to +70°C Housing Material:: ABS or Similar

Two EAS Pedestals Library Security Gate

Security gate should include two theft detection pedestals, which are interdependent of each other and also have an overlapping protection zones providing additional security. It is planned to install these pedestals at a single location in the library. The system should have suitable number of I/O ports for Standard electronic counter. It should also have multi line infrared motion sensors to detect library foot falls and in-out numbers. Specifications Operating Frequency: 13.56 MHz Power Supply: AC 230V / 50Hz Power consumption: 30W maximum Transmitting Power: 0.5W to 6W variable Read Range: Up to 1 m with pair of gates Communication Interface: RS232 / Ethernet Supported Transponders: ISO 15693-3, I Code Operating Temperature: -10°C to +70°C Weight: 25 Kg approximately Housing Material: Industrial Plexiglass or similar+B19 Communication Parameters : Baud Rate: 115200 Kbps

Self Adhesive RFID Tags (for Book)

The RFID chip used in the tag should have been designed specifically for Library use. i.e. it should have three sections Lockable section for item identification. Re-writable section for library-specific use. Security function (EAS) for item anti-theft (which can be activated and deactivated.) The RFID chip should have multi-read function i.e. several tags can be read at the same time. a) Tag size should be 80mm x 50mm with at least 2048 bits memory, multi-read and antitheft b) Tags should be fully ISO 15693/18000-3 compliant c) Other features: "Tag Talks First" (TTF) feature, tamper proof, detection rate of the system should be above 95% consistently regardless of the number of items that are in the field d) Warranty of Tags Minimum 40 years for logic circuits and replacement of defective tags if found during first time tagging e) Mechanical Dimension • Transponder coil size 76x46 mm ± 0 5mm • Transponder die-cut size 80 x 50 mm 0.2 • Thickness of the IC 150 micrometer ± 10% • Overall thickness of transponder package (excluding IC and siliconized paper) 200 micro meter ± 10% • Thickness of the siliconized wafer 56 micro meter f) Electrical characteristics • Integrated Circuit (IC) Philips i-Code-SLI X. • ICS protocol /anti-collision ISO 15693/18000-3 • Operating frequency 13.56 MHz • Unloaded resonance frequency 14.15 MHz ±0.30 MHz • Memory 2048 bits R/W EEPROM g) General characteristics of transponder • Operating temperature (electronics parts): -20'C to *85"C • ESD voltage immunity +12 kV peak. HBM • Bending diameter (D) > 50 mm. tension less than 10 N • Static pressure (P) < 10 MPa (10 N/mm2)

Institution Labels

Good quality self-adhesive labels of the following specification: a) Good quality smooth face b) Label printed with Name and logo (design to be approved by Department) c) Size: Minimum half an inch larger on all sides than the RFID tag d) Strong permanent adhesive, which does not leach into the paper of the book

Integration Module / Middleware Features

TIHOTS

Informatics Publishing Ltd