Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.3 LAccepted-AOC | L1 | Accepted-AOC Lowest value Accepted | |
| 2 | L2₹10.5 L+₹19,972.46 (1.94%)Rejected-Finance | L2 | Rejected-Finance Highest value Rejected |
Tender Value
₹12.5 L
EMD Value
₹12,500
Closing Date
11 Dec 2024, 3:00 pmClosed
EXECUTIVE OFFICER
MUTHUPET TOWN PANCHAYAT
Construction of RO Plant Building At Ward No 3, Maruthangaveli Infront Of P U M School In Muthupet Town Panchayat.
2024_DTP_509067_1
183-2024-a1
Open Tender
Civil Works - Buildings
Works
180 days
MUTHUPET TOWN PANCHAYAT
CLASS III
2 documents required · 2 mandatory
₹0
₹12,500
28 Jan 2025
9 Dec 2024
11 Dec 2024
9 Dec 2024
11 Dec 2024
9 Dec 2024
9 Dec 2024 - 11 Dec 2024
Boring, providing and installing Bored cast-in-situ reinforced cement Concrete pile of specified diametre and length below the pile cap in cement concrete 1 :1.5:3 ( 1 cement, 1 .5 Coarse sand,& 3 graded stone aggregate of 20 mm nominal size) to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including Bentonite solution machinery charges labour chargres etc., all complete.
Earth work excavation for foundation in all type of soils as may be directed except in hard rock requiring blasting and also including refilling the sides of foundations with excavated soil in layers of 15cm thick well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead of 10m and lift of 2mts. for ordinary soil, cost including all costs etc., complete as per standard specification.
Collection, supply and filling with gravel in foundations, pavement and basement, in layer of not more than 15cm thick, well ramming and consolidating etc., complete, cost including all costs etc., complete as per standard specification.
Collection, supply and filling with Stone Dust in foundations, pavement and basement, in layer of not more than 15cm thick, well ramming and consolidating etc., complete, cost including all costs etc., complete as per standard specification.
Plain cement concrete of mix 1:4:8 (one cement four M-sand eight course agreegate using hard broken granite stone jelly of 40mm gauge for foundation levelling course including shuttering dewatering wherever necessary and laid in layers of not more than 15cm thick etc., complete cost including all costs etc., complete as per standard specification.
Supplying, fabrication and placing in position mild steel or deformed steel bars for all reinforced cement concrete terms of steel transporting straightening, cutting, bending, cranking, binding, welding, etc., including cost of binding wire M.S. chairs laps to fix the reinforcement in all positions, all labour and materials etc., complete cost including all costs etc., complete as per standard specification.
Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.
Supplying and erecting centering for sides and soffits including support and strutting upto 1.00 m high for plain surface with all cross bracing using mild steelsheet of 90cm X 60cm and stiffened with welded mild steel angle of size 25mm X 25mm X 3mm for boarding laid over silver oak ( country wood) joists of size 10cm X 6.5cm cost including all costs etc., complete as per standard specification. For Grade beam
Supplying and erecting centering for sides and soffits including support and strutting upto 3.50m high for plain surface with all cross bracing using mild steelsheet of 90cm X 60cm and stiffened with welded mild steel angle of size 25mm X 25mm X 3mm for boarding laid over silver oak ( country wood) joists of size 10cm X 6.5cm ( space at about 90cm c/c and supported by casurina props 10cm to 13cm dia spaced 75cm c/c etc., complete cost including all costs etc., complete as per standard specification. For columns
Supplying and erecting centering for sides and soffits including support and strutting upto 3.50m high for plain surface with all cross bracing using mild steelsheet of 90cm X 60cm and stiffened with welded mild steel angle of size 25mm X 25mm X 3mm for boarding laid over silver oak ( country wood) joists of size 10cm X 6.5cm ( space at about 90cm c/c and supported by casurina props 10cm to 13cm dia spaced 75cm c/c etc., complete cost including all costs etc., complete as per standard specification. For beam and slab
Brick work in cement mortar 1:5 (one cement, five M-sand) using III class country bricks of size 0'- 8 3/4" x 0'-4 1/4" x0' 2 3/4" from approved kiln with best quality and strength including all cost and conveyance of all materials and labour charges and all other costs etc., complete as per standard specification.
Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxide primer, including cost and conveyance of material to site and all labour charges and other incidental charges etc., complete complying with std specification. 1.00 M x 2.10 M size as per TWAD SOR 20.0.II
Supplying and erecting pull and push type rolling shutter manually operated with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer, cost including all cost and conveyance of material to site and all labour charges and other incidental charges etc., complete complying with std specification. Gear operated type (from 8 m2 to 12 m2 area)
Supplying and fixing of M.S.grill and gate etc., as per design approved by department engineer including cost of materials and labour charges etc., complete cost including all costs etc., complete as per standard specification.
Special ceiling plastering and finishing the exposed surfaces of all RCC items of works with cement mortar 1:3 (One cement and three sand) of 10 mm thick including hacking the surface and providing necessary cement mortar nosing, beading as per size and specification wherever necessary using the same mix in all floors etc., cost including all cost and conveyance of all materials to site, labour charges and other incidental charges etc., complete complying with std specification.
Plastering in cement mortar 1:5 mix (one Cement and five sand) of 12 mm thick etc., cost including all cost and conveyance of all materials to site, labour charges and other incidental charges etc., complete complying with std specification.
Weathering course concrete with broken brick jelly of 20 mmhauge in pure slacked lime ( no sand to be added) over roof slab the proportion of brick jelly to lime being 32 to 12.5 by volume and laid over In a single layer and consolidated require designed and finished thickness by beating the concrete with wooden beaters of approved pattern , keeping the surface constantly welded springing lime jiggery water asper standard specification and as directed by the departmental officers.
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Painting two coats with approved First quality plastic emulsion paint over cement plastered wall surface and ceiling including cost of one priming coat, Cost of all materials, all labour charges, brushes, cleaning preparing the surface,scaffolding charges and curing charges etc., complete cost including all costs etc., complete as per standard specification.
Painting two coats over new iron work for doors, windows and ventilators iron bars weld mesh wire mesh screen, steel bars flats and other similar works etc., with two coats of approved first quality of synthetic enamel paint over the existing tred oxide primer in all floors The rate inclusive of cost of all materials and labour brushes and scaffolding charges etc., complete cost including all costs etc., complete as per standard specification.(The paint should be got approved by the Municipal Engineer before use on work)
Providing Rain water down fall pipe using 110 mm dia pipe of 4 kg/c.m.2 with necessary specials and clamp etc., complete.including cost and conveyance of materials, all labour charges for fabrication, fixing with all furnitures fittings etc., complete as directed by departmental officer.
Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator) etc., complete cost including all costs etc., complete as per standard specification. (SD-23)
Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.as per (SD 40)
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor, with TW round blocks on wall or ceiling with flu.tube with PVC unsheathed Copper leads from terminals to the fitting. (Sd-88)
Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL.(SD 83)
Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains, cost including all costs etc,., complete as per standard specification. SD 65
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry cost including all costs etc., complete as per standard specification. SD 233
1.RAW WATER FEED PUMP: Supply, Delivery, Erection and commissioning of Raw Water feed Pump of Flow rate 2 m3/hr with a head upto 3.5 kg/ cm2 and single phase motor Make: Dharani/Cri/kirloskar including all other lab our charges etc complete as per the standard specification
2.PRESSURE SAND FILTER: Supply, Delivery, Erection and commissioning of Pressure sand filter Type down flow ,Capacity 2000 liter per hour Diameter 12 inch Height 48 inch Vessel material FRP Valve 20 nb multi port valve Design pressure 4 kg/cm2 Operating pressure 3.5 kg/cm2 Filter media pebbles, sand Frontal piping upvc including all other labour charges etc complete as per the standard specification
3. ACTIVATED CARBON FILTER: Supply, Delivery, Erection and commissioning of Activated carbon filter Type down flow ,Capacity 2000 liter per hour Diameter 12 inch Height 48 inch Vessel material FRP Valve 20 nb multi port valve Design pressure 4 kg/cm2 Operating pressure 3.5 kg/cm2 Filter media activated carbon Frontal piping upvc including all other labour charges etc complete as per the standard specification.
4. 10 MICRON FILTER CATRIDGE: Supply, Delivery, Erection and commissioning of 10 micron cartridge filter Type down flow Capacity 2000 liter per hour Diameter 2.5 inch Height 20 inch Vessel material pp Design pressure 4 kg/cm2 Operating pressure 2.5 kg/cm2 Filtration rating 10 micron including all other lab our charges etc complete as per the standard specification
5. 5 MICRON FILTER CARTRIDGE: Supply, Delivery, Erection and commissioning of 5 micron cartridge filter Type down flow Capacity 2000 liter per hour Diameter 2.5 inch Height 20 inch Vessel material pp Design pressure 4 kg/cm2 Operating pressure 2.5 kg/cm2 Filtration rating 5 micron including all other labour charges etc complete as per the standard specification specification
6. CHEMICAL DOSING SYSTEM: Supply, Delivery, Erection and commissioning of Chemical Dosing system CDS 1 Chlorine and Antiscalant Capacity 0-5 liter per hour Tank Volume (Ltrs) : 50, Max Frequency (strokes/min) : 100 Discharge Capacity at max. back pressure (Liters / hr) : 6.30 @ Bar : 3.5 Discharge capacity at nominal back pressure (Liters / hr) : 6.40 @ Bar : 2.00 Suction Discharge tube (OD x ID) mm : 8 x 5 Nominal Power (watts) : 12 including all other labour charges etc complete as per the standard specification specification
7. HIGH PRESSURE PUMP: Supply, Delivery, Erection and commissioning of High Pressure Pump Flow rate 2000 liter per hour Operating head 13 kg/cm2 Type vertical stainless steel multistage centrifugal pump Material of construction stainless steel 304 Make CRI/Crompton including all other labour charges etc complete as per the standard specification
8. MEMBRANE: Supply, Delivery, Erection and commissioning of membrane Diameter 4 inch Length 40 inch Material TFC polyamide Make Hydronautics / Ge /CSM including all other labour charges etc complete as per the standard specification
9. MEMBRANE HOUSING: Supply, Delivery, Erection and commissioning of membrane housing Diameter 4 inch Length 40 inch Material FRP Pressure rating 300 psi including all other labour charges etc complete as per the standard specification
10. CONTROL PANNEL : Supply, Delivery, Erection and commissioning of Control panel Micro processor programmed panel board digital display for operation, overload protector single phase protector, low pressure cut off , high pressure cut off, high TDS cut off , feed water pump controller and over flow control within built TDS meter suitable for 1000 lph system. Menu can be programmed according to the customer need including all other lab our charges etc complete as per the standard specification
11. INTER CONNECTION PIPE: Supply, Delivery, Erection and commissioning of inter connecting pipes from high pressure pump to membrane and rejection water line upvc grade and the piping from feed water pump to high pressure pump of upvc grade including all other lab our charges etc complete as per the standard specification
FAKHURUDEEN AHAMED (BID ID -1206142)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .