Construction of Vehicle Parking Shed (size 12mt x 05mt (sheet structure)) behind Pathology Lab Building

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m all kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of cantering and shuttering – All work upto plinth level, 1:5:10 (1 cement: 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size)

For pipe base

For plinth protection for sides

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – 1:3:6 (1 Cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)for front ramp and below solid block, for floors

Structural steel work welded in built up sections, trusses and framed work, railing work including cutting, hoisting, fixing in position providing screws, bolt & nuts etc., and applying a priming coat of approved steel primer all complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Asian Tractor / Jonson Nicholson / Berger)

Providing and fixing precoated galvanized steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete tiled shaped as per approved sample for roof, top front and rear cladding and bottom three side cladding

Providing Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Providing and constructing concrete block masonry using 150x200x400 mm solid core compact concrete block (Grade C - 50Kg/Cm2) in CM 1:6 including all scaffolding, curing, etc. complete for sides

G.Rajanna (BID ID -3131059)

Sri Manjunatha Swamy Electricals (BID ID -3131359)