Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.4 LAccepted-AOC BALSUA P O JHAKOLARI PATHANKOT PATHANKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being lowest bid. | |
| 2 | L2₹29.0 L+₹57,956 (2.04%)Rejected-Finance 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L2 | Rejected-Finance Other than lowest bid. | |
| 3 | L3₹30.3 L+₹2.0 L (6.89%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bid. | |
| 4 | L4₹31.7 L+₹3.3 L (11.6%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bid. | |
| 5 | L5₹32.4 L+₹4.1 L (14.3%)Rejected-Finance | L5 | Rejected-Finance Being lowest bid. |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
10 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE SOUTH MAMUN
REPAIR TO ROOF PROJECTIONS, SUN SHADE, SUNKEN FLOOR TREATMENT AND REPAIR TO MES INSTALLATIONS UNDER AGE B/R-I OF GE (SOUTH) MAMUN
2022_MES_551938_1
GE(S)/M-32/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE SOUTH MAMUN
AS PER NIT
8 documents required · 8 mandatory
₹500
GE SOUTH MAMUN
₹68,000
Yes
10 Nov 2022
14 Sept 2022
17 Oct 2022
14 Sept 2022
10 Oct 2022
28 Sept 2022
Amount
M&L PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregates) as in bed of drains finished the surface fair and even complete all as specified and directed.
M&L for providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates as in louvres and jallies, 50mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed.
M&L Precast reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as cover slabs supported on walls or in shelves and the like, plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match, including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note:- (Reinforcement cut as required to facilitate demolition)
M&L for RCC Type A1 1:1.5:3 Nominal mix (using 20 mm graded stone aggregate) as in chajjas, including demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note:- (Reinforcement cut as required to facilitate demolition)
M&L for strengthening and repair to RCC structural members such as column, beams, fins, facia, cooler plateform, chajjas, parapet & RCC slab as per the following precedence of application including necessary formworks and scaffolding upto 7m height (if required) including dismantling loose/cracked plaster/concrete from RCC surface in any thickness complete all as specified and directed:- (a) Taking down the damaged/loose concrete over existing structure and then making holes to existing structure to receive slurry, injecting and grouting to arrest leakage including and mixing of polymer based liquid water proofing compound mixed with cement @ 400ml/50kg of cement in the water to form slurry, pumping the slurry through these holes one by one by using pressure pump till bleading the slurry and leave the surface for 24 hours. (b) Apply one coat of steel bar coat of rust preventive solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacturer of membrane.
M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, including demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.
All as per srl item No 2.00 here-in-above but (EXCEPT BRICKS) complete all as specified and directed.
M&L for form work to flat, rough finished surfaces of concrete of chullah hoods, chajjas, balcony railing troughs and similar works (Horizontal or sloping) including edges complete all as specified and directed.
S&F factory made 40mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides conforming to IS-2202 (Part-I) 1999, complete all as specified and directed.
S&F 35mm thick factory made wire guazed and skeleton shutters (2nd class hardwood), open rebated and prepared to receive wire cloth, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire cloth etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats at site, complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F Solid PVC door frame of size 75mm x 45mm, made out of 5mm thick wood grain printed PVC sheet & edges will be printed to match single side prelam PVC sheet reinforced with MS 19mm Square tube, suppling & fixing in opening at site, complete all as per specifications & drawing.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm long extruded aluminium handle, fabricated type, anodised complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
S&F 300mm size mild steel, ordinary rat tail, rod pattern spring including roller and roller plate, complete all as specified and directed.
S&F 140mm long floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring, fixed in floor including vulcanised rubber complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F Box type steel windows and ventilators, comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube, factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes shall be measured and paid separately under respective items of BOQ) with steel handle and steel peg stay dovetailed or welded including 2 Nos. tower bolts of 150mm long for each leaf and 10mm square bar grills at spacing as shown on drawing, welded to FI frame work including other fittings such as hinges, handles, tarred hold fasts etc. fixed in PCC blocks including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as shown on drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105mm x 60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. including filling of concrete 1:3:6 type C-0 (12.5mm graded stone aggregate) as in back of chowkhats and including two coats of synthentic enamel paint over a coat of red oxide primer, complete all as specified and directed.
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
M&L for frame work for sunshade made with hollow MS pipe and flat iron (size as required at site) including welding, reveting, cutting hole to brick wall, chases cutting for inserting sheet to wall, complete all as specified and directed.
Taking down existing rolling shutter and refixing to same opening after repairing, easing and adjusting including replacement of ball bearing, anchoring rod, gear box and crank handle, safety lever locks mild steel with 4 lever for rolling shutter complete all as specified and directed.
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F Welded steel wire fabric exc. 4.00 Kg/Sqm supplied and fixed to wood or steel members complete all as specified and directed.
S&F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in curved sunshade, made to shape, fixed with self tapping screws and including necessary scaffolding and including dismantling existing sunshade/sheets of any description, complete all as specified and directed.
Taking down existing existing roof treatment (any thickness including PCC padding mud puskha etc complete including) roughening the surface of old concrete by picking, sweeping/brushing clean and washing down with water to remove dust and applying neat cement slurry with 3.0 Kg of cement per Sqm, including removal of debris in low laying area exc 1.0 KM but not exc 2.0 KM from starting point, complete all as specified and directed.
M&L PCC 1:2:4, type B-1 (using 12.5mm graded crushed stone aggregates) as in levelling course on existing roof or sunken floor of toilet portion, rounded and chamfered on edge complete all as specified and directed.
M&L Bitumen blown any grade, applied hot, two coats, to concrete/plastered surfaces at the rate of 1.5kg. per sq. m per coat and applying polythene film, black, 50 micron for sunken floor slab and embedded in side wall/covered fillet complete all as specified and directed.
M&L for 10mm thick cement plaster in cement mortar 1:3 on brick or concrete surfaces of sunken floor & walls finished even and smooth without using extra cement including and mixing with WPC @ 0.200ltr/ 50 Kg bag of cement, complete all as specified and directed.
M&L for PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in sunken floor complete all as specified and directed.
M&L for 20mm thick cement plaster on roof top in cement mortar 1:3 on concrete surfaces, finished even and smooth without using extra cement including and mixing with WPC @ 0.200ltr/ 50 Kg bag of cement, complete all as specified and directed.
M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :- (a) Cleaning the top surface of RCC roofing properly with water. (b) Applying oil bound bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface. (c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap. (d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane. (e) APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC 1:2:4, type B-0. (f) Top of membrane shall be provided with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
M&L for 75mm thick cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving, laid in slope, finished even and fair including making joints at every 2.5 mtr and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight, complete all as specified and directed.
M&L for 25mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in sub base for laying floor finishes complete all as specified and directed
M&L for 40mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors finished the surface even and smooth using extra cement complete all as specified and directed
M&L for 50mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors s in floors finished the surface even and smooth using extra cement including cutting grooves n. exc. 2.00 Sqm in each panel complete all as specified and directed
M&L for 100mm PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in floors finished the surface even and smooth without using extra cement including cutting grooves n. exc. 2.00 Sqm in each panel complete all as specified and directed
M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 9mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 9mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:4 for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 5mm thick rendering or plastering work in CM 1:3 as on ceiling finished even and smooth without using extra cement including taking down existing cement plaster on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc. including taking out peeled off existing plaster / concrete including roughening old concrete surface and making the line in true shape and finishing the surface without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement in top layer, complete all as specified and directed.
M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of white wash, complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of old surfaces of ceiling including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of white wash, complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash, complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 2mm thick wall care putty and applying two coats of oil emulsion distemper, complete all as specified and directed.
M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of washable distamper white or tinted including removal of nails etc complete all as specified and directed.
M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.
M&L for preparation of old surfaces of walls of any description including washing down, rubbing, brooming down with wire brush, scrapping down smoke, roots, moulds, salts and treading oil and greasy spots, and applying one coat of exterior weather coat paint, white or tinted, complete all as specified and directed.
M&L for preparation of newly plastered surface of wall and making the surfaces smooth by applying 1mm thick wall care putty and applying two coats of exterior weather coat paint, white or tinted, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads / clips,complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.
M&L for preparation of newly wood & wooden based surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of pink primer complete all as specified and directed.
M&L for preparation of old surfaces of wood & wooden of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of newly steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old surfaces of steel & iron work of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
S&F Rotational moulded polyethlene water storage tank of capacity 1000 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.
S&F Rotational moulded polyethlene water storage tank of capacity 500 Litres, three layers (cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia PVC ball valve, high pressure with polythene float complete all as specified in SSR Part-1, including dismantling of existing PVC water tank of any capacity complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store for 15mm dia bore complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store for 20mm dia bore complete all as specified and directed.
M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
M&L for 15mm bore water tubes (EXCEPT TUBING) 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
M&L for 20mm bore water tubes (EXCEPT TUBING) 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F "as in repair" 15mm bore Pillar tap, cast copper alloy, fancy type, with capston head, chromium plated, screwed down, high pressure with or without letters, hot or cold with long screwed shank and fly nuts, screwed for iron pipe, complete all as specified and directed.
S&F "as in repair" 15mm bore stop/angle valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
Refixing only 15mm bore stop/angle valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
S&F "as in repair" 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
Refixing only 15mm bore stop valve, cast copper alloy (ISI Marked), fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.
S&F "as in repair" PVC ball valve, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20mm bore pipe, complete all as specified and directed.
S&F "as in repair" CP Shower rose of size 150mmx150mm with swivel arm, stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.
Refixing only CP Shower rose of any size and any description, including fixing to steel pipe or union complete all as specified and directed.
S&F "as in repair" brass CP soap dish fixed with and including CP screws complete all as specified and directed.
Refixing only bevelled edge mirror of any size and any description, fixed with chromium plated brass screws and cup washers, complete all as specified and directed.
S&F "as in repair" PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) 4Kgf rain water pipes, single socketed, in any length with rubber ring joints, laid or fixed to walls, including stack clamps made out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) 4Kgf rain water pipes, single socketed, in any length with rubber ring joints, laid in floor or trenches complete all as specified and directed.
S&F "as in repair" 110mm bore PVC (SWR) 4Kgf rain water pipes, single socketed, in any length with rubber ring joints, laid or fixed to walls, including stack clamps made out of 50mmx5mm flat iron and 16mm dia round iron stays, including bolts and nuts complete all as specified and directed.
S&F "as in repair" 75mm bore PVC (SWR) 4 Kgf bend, plain including jointing with solvent cement, complete all as specified and directed.
S&F "as in repair" 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and directed.
Refixing only of Vitreous china wash basin, any description, old/new position including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.
S&F "as in repair" Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.
S&F "as in repair" Viterous china urinals, half stall type, including spreader CP coupling, waste pipe and all necessary fittings, complete all as specified and directed.
S&F "as in repair" Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover for pedestal pan and connecting etc, complete all as specified and directed.
S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.
S&F "as in repair" PVC flushing cistern of 10 Ltrs capacity including PVC inlet and outlet connections, brackets, PVC flush pipe with bend 32mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.
Dismantling wrough iron or mild steel work of any description complete all as specified and directed.
Demolition of unreinforced cement concrete any description and in any position complete all as specified and directed.
Dismantling timber scantling 40 Sqm and over in section in unframed work etc complete all as specified and directed.
Taking down chowkhats or frames not exc 1.5 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and directed.
Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.
Refixing only door chowkhats or frames of any description exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), in same opening or other after resecuring or easing complete all as specified and directed.
Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.
Refixing only door shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, in same opening or other after resecuring or easing complete all as specified and directed.
Taking down cement plaster on brick walls or stone walls any description including racking out joint, hacking for key, scrupping down with water complete all as specified and directed.
Refixing of bib tap of 15mm/20mm bore any description, complete all as specified and directed.
S&F glass dividing strip 3mm thick and 38mm wide fixed to design, complete all as specified and directed.
RD Engineers
M/S NARESH KUMAR SHARMA
M/S TARA CHAND CONSTRUCTION CO.
M C ENTERPRISES
dadwal engineers
Bidder Name
dadwal engineers
GANDOTRA CONSTRUCTION CO
RD Engineers
M/S TARA CHAND CONSTRUCTION CO.
M/S NARESH KUMAR SHARMA
M C ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .