Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.2 LAccepted-AOC COLLEGE ROAD CHABUA PO CHABUA DIST DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹47.6 L+₹2.5 L (5.43%)Rejected-Finance 16 BAITHAKKHANA ROAD 16 BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH BAITHAKKHANA ROAD SEALDAH KOLKATA | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹48.4 L+₹3.2 L (7.13%)Rejected-Finance | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹48.8 L+₹3.6 L (8.07%)Rejected-Finance 1389 RADHETENAMENT SOCIETY SARDAR ROAD SURENDRANAGAR SURENDRA NAGAR GUJARAT 363001 | SURENDRANAGAR | GUJARAT | 363001 | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹49.8 L+₹4.6 L (10.2%)Rejected-Finance | L5 | Rejected-Finance Rejected being L5 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) CHABUA
GE (AF) CHABUA, POST-CHABUA AIR FIELD, DIST-DIBRUGARH, ASSAM-786102
As per BOQ
2024_MES_649410_1
561/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) CHABUA
As per tender documents
7 documents required · 7 mandatory
₹500
GE(AF) CHABUA
₹90,000
Yes
9 May 2024
5 Apr 2024
29 Apr 2024
5 Apr 2024
27 Apr 2024
20 Apr 2024
Amount
M&L for preparation of old decorated plastered or unplastered surface of wall and applying one coat of white wash, complete all as specified and as directed.
All as per item no 01 here-in-before but as on ceiling ,complete all as specified and as directed
M&L for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper including making good the surface by filling with wall care putty making surface even and smooth, complete all as specified and as directed.
M&L for preparation of old decorated surfaces of wall and applying two coat of oil bound distemper including making good the surface by filling with wall care putty making surface even and smooth, complete all as specified and as directed.
M&L for complete removal of existing treatment and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth surfaces and applying two coats of oil emultion distemper over a coat of primer using roller only as per manufacturers instruction, complete all as specified and as directed.
M&L for preparation of old painted wooden surface and applying one coat of synthetic enamel paint of any description exc 10 cm width or girth, complete all as specified and as directed.
M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying one coat of syanthetic enamel paint, complete all as specified and as directed
M & L for preparation of Old painted wooden surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M & L preparation of old walls and applied textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
M & L preparation of walls and applying acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified.
Taking down cement plaster including raking out joints hacking for key, scrubbing down with water , complete all as specified and as directed
M&L for rendering 15mm thick plaster in CM (1:4) on brick or concrete surfaces finished even & fair complete all as specified and as directed.
M & L for rendering 15 mm thick on other than fair faces of Brick wall finished fair & even in CM (1:6), complete all as specified and as directed.
M & L for rendering 10 mm thick in CM (1:3) finished fair & even on ceiling, complete all as specified and as directed.
M&L for preparation of new wall surfaces and applying two coats of oil bound distemper over 1mm thick plaster of paris putty over a coat of primer using roller only as per manufacturers instruction, complete all as specified and as directed.
M&L for three coats of white wash on newly plastered surface of wall including preparation of surface, complete all as specified and as directed.
M&L for three coats of white wash on ceiling, complete all as specified and as directed."
M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint incl preparation of surface complete all as specified and as directed.
Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified.
M&L for Vitrified coloured ceramic tiles (Light Shade) 10 mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over & including 15 mm thick screed bed or bedding leyer in CM (1:6) complete all as specified and as directed.
M&L for Vitrified coloured ceramic tiles (Light Shade) 10 mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm as in dado/skirting set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over & including 10 mm thick screed bed or bedding leyer in CM (1:4) complete all as specified and as directed.
M&L Non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18sqm, in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile over & including 15 mm thick screed bed or bedding leyer in CM (1:6) Complete all as specified and directed.
M&L non skid cermic coloured tiles 8mm thick ( square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile as in vertical surfaces/skirting over and including 10mm thick plaster in CM (1:4) as backing coat complete all as specified and as directed.
M&L for glazed ceramic coloured tiles (any shade) of size 350x250x7mm/ 450 x 300 x 7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in CM (1:4)as backing coat complete all as specified and as directed.
S&F in repair 15 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc including work at portion ordered to be concealed and taking down old GI tubing complete all as specified and as directed.
S&F in repair 20 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc including taking down, complete all as specified and as directed.
Demolition of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed.
M&L for 15 to 18 mm thick granite of any type/colour as approved, work (table rubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over and including cement screed over Cement Mortar bedding in CM (1:4) 10 thick and pointed in white or colour cement with admixer of pigment to match with shade of granite stone incl grinding and polishing complete all as specified and as directed by Engr-in-Charge.
Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) , complete all as specified and as directed by Engr-in-Charge.
M & L 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in plinth protection/Hard standing complete all as specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B1 using 12.50 mm graded stone aggregate as in sub base of floor to receive floor finishes completeall as specified and as directed.
Taking down chowkats or frames with shutters w/o taking off shutters from the frames n.exc 1.5 Sqm each,complete all as specified and as directed.
Taking down chowkats or frames with shutters w/o taking off shutters from the frames exc 1.5 Sqm and n.exc 4.0 sqm each each, complete all as specified and as directed.
Taking down shutter of any description n. exc 1.00 Sqm each complete all as specified and as directed.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.
S&F in repair second class hard wood in scantlings clean sawn in framed or unframed works as ordered
Refixing shutter of same opening any description n exc 1.00 Sqm each complete all as specified and as directed.
Refixing shutter of same opening any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.
Resecuring or easing & adjusting, without taking down shutter any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.
S&F solid PVC door frame wood grain printed of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opeing, complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail ,lock rail & bottom rail on either sides and as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joint together with solvent cement, complete all as specified and as directed.
S&F for 35mm thick factory made, IInd class hard wood, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 30mm thick Flush shutters, Solid core construction, with block board core and plywood face panels, commercial type on both sides , complete all as specified and as directed.
S&F 35mm thick 2nd class hardwood glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc (with out sashbars) edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed. Note: Steel wire cloths and sheet glass shall be measured and paid sepereately under respective item.
S & F 30 mm thick thick 2nd class hardwood glazed skeleton shutters for windows ,ventilators etc are provided with stiles and rails as specified in SSR Part-I Section 8, clause.8.24 (b). Note: Steel wire cloths and sheet glass shall be measured and paid sepereately under respective item.
S&F anodised aluminium window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/Mtr etc complete and inclusive of necessary hardware i.e. locking mechanism, handle and 4.8mm thick selcted quality glass for glazing and stainless steel wire cloth 0.71mm dia with width of aperture 1.18mm including necessary gasket / neoprene / rubber packing / beading etc all as specified and directed
S&F anodised aluminium ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M including fosted glass louvers and allied items to facilitate louver action etc complete all as specified and as directed
S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed.
M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.
S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge
S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge
S&F 3mm thick plain glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F in repairs 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane including Hacking out old broken glass (any thicknes, size , quality or description) from wooden frames glazed with oil putty or fixed with beads complete all as specified and as directed.
S&F 150mm long anodised aluminium handles, cast type, complete all as specified and as directed.
S&F for 150mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed.
S&F 100mm long anodised aluminium handles, cast type, complete all as specified and as directed.
S&F for 100mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed.
S&F 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
S&F MS medium grade butt hinges 100 mm size complete
S&F in repair 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete
M&L preparation of newly wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F in repairs vitreous china wash hand basin, (white), flat back of size 550x400 mm with and including two CI brackets, brass chromium plated waste coupling fittings and PVC waste pipe complete all as specified and as directed.
S & F in repair 15 mm dia bore fancy type pillar taps, cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with capstan head, screwed for iron pipes or for union and fixed, complete all as specified and as directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen with plug washers and waste pipee includind bedding in cement mortar, two coat iron fixing bracket of required size and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm, complete all as specified and as directed.
S&F sinks made of stainless steel without drainage board lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
S&F in repair 15 mm dia bore bib taps cast copper alloy with, capstan head, CP long body fency type screwed down for iron pipe 15mm dia complete all as specified and as directed.
S&F in repairs 32 mm dia CP Waste coupling for Sink complete all as specified and as directed.
S&F in repair Waste pipe any dia (32/40mm) 1.5 mtr long complete all as specified and as directed.
S&F in repair 15mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock /stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.
S&F in repairs brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed.
S&F in repair toilet paper holder chromium plated fixed to wall with chromium plated brass screw, complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pan (Cascade pattern) coloured, fancy type (including two Nos fixing bolts incl PVC seat cover but including flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.
S&F in repairs PVC water closet seat cover white, closed pattern and mild steel chromium plated or aluminised hinging device.
S&F in repair PVC connections 15mm size with Brass nuts of length 450mm complete all as specified and as directed.
S&F in repairs sheet glass shelf / three tier corner shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 45cm long, complete all as specified and as directed.
S&F in repairs chromium plated health faucet 8mm dia 1 mtr long cp flexible tube with wall hook and zet sutable for 15 mm bore pipe or for union and fixed of approved make, complete all as specified and as directed.
S&F in repairs PVC bath room cabinet with mirror of size 600 mm x 450 mm pasted coloured with mirror shutter and built in shelves, fixed with CP screws, complete all as specified and as directed.
S&F in repairs CP towel ring 20 cm dia fixed with CP screws and wood cleats / rowel plug with wall, complete all as specified and as directed.
S&F in repairs CP towel rail 20 mm dia, 60 cm long fixed with CP screws and wood cleats / rawal plug on wall, complete all as specified and as directed.
S&F in repairs low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm, 50mm bore, complete all as specified and as directed.
S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixd to walls etc complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixd to walls etc complete all as specified and directed.
S&F in repair PVC (SWR) bend any radius, 110 mm dia complete all as specified and directed.
S&F in repair PVC (SWR) junction single 'T' equal with access door 110 mm dia complete all as specified and directed.
S&F in repairs 20mm dia curtain rails etc as directed, mild steel, chromium plated with fixing bracket stops, rollers etc, complete all as specified and as directed.
S&F in repairs 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and bends complete all as specified and as directed.
S&F in repairs stainless steel plate rack of size 900x 750 x 250 mm made of 1mm thick stainless steel all as specified and directed by Engr-in-Charge.
S&F in repairs 140 mm dia CP grating incl joints with solvent cement complete all as specified and directed.
S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed.
S&F in repairs 18/19 mm thick pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed in cup board shutter, shelves, partitions and similar items including teak wood leeping to edges complete and dismantling complete all as specified and as directed.
S&F continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap size 30mm complete all as specified and as directed.
S & F in repairs hasp and staple for 75 mm of aluminium anodised all as specified and as directed
Repairs to Bath room/Toilet/Kitchen Floor traps by replacing the damaged Floor traps and connected waste pipes with new floor traps and waste pipes. The joints of traps and waste pipes shall be done properly/leak proof and re-fixing the same floor/wall etc and the surfaces finished even to match with the existing surface including demolition of concrete if required and making good to surface using PCC 1:2:4 type B1 (using 20mm graded stone aggregate) or CM 1:4 and tiling as required complete all as specified and as directed. Note:- Quantity of floor/wall tiles shall be measured and paid seperately under the relevant items.
Dismantling water tanks and removing to store Exc 250 & n exc 500 ltrs complete all as specified and as directed.
Dismantling water tanks and removing to store Exc 500 & n exc 1000 ltrs complete all as specified and as directed.
S & F in Rotational moulded polyethylene water storage tanks 500 ltrs(cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
S & F in Rotational moulded polyethylene water storage tanks 1000 ltrs(cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
M&L for anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors using Chloropyriphos 20 EC complete
M &L at point of contract of wood work by chemical emulsion @ 0.5 ltr/ hole by drilling 6mm dia hole at a down ward angles of 45 degree at 150mm center to center and sealing the same.
M/s HALDER ENTERPRISE
M/S P R SINGH AND SONS
M/S S. P. ENTERPRISE
J D construction
MAA COMMUNICATION
FREEZCON
STANDARD ELECTRIC WINDERS
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .