REPAIR / MAINT DRAINAGE FOOTPATH HARDSTANDING AND MISC B/R WORKS AT DRONACHAL BHOPAL

Amount

Demolition of stone/ boulder/brick masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

Demolition of reinforced cement cocrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise provided for etc. complete all as specified.

Demolition and breaking up any bore drain pipes, etc (RCC/ SWG/CI etc) of any description in trenches or floors, including connections and fittings.

Taking down of cement plaster inculding wall finishes in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. all as specified and directed

Demolition of cement concrete unreinforced in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes all as specified and directed

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation and sub base etc complete all as specified and directed

M&L for Stone walling of squred rubbled ,brought up to courses well bonded and solidily hearted built in CM (1:6) all as specified and directed.

Dittio as per item No. 7 above Except stone as obtained from demolition including cleaning and making suitable for fixing complete all as specified and directed.

M&L for brick work with sub class B brick straight or curved on plan exe 6 m mean radious built in Cement Mortar 1:6.

Ditto all as per item No. 9 above except bricks obtained from demolition including cleaning/stacking and making suitable for fixing complete all as specified and directed.

M&L for RCC (1:2:4) type B1(nominal mix) using 20 mm graded stone aggregate as in retaining walls, basement walls, ballast walls and the like any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed

M&L for Use and waste of formwork to Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc vertical or to better complete all as specified and directed

M&L for TMT mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed.

M&L for Rendering 15mm thick in Cement Mortar (1:4) on Random Rubble stone masonry/brickwork complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in benching of drain complete all as specified and directed.

M&L for keyed pointing in CM (1:3) to random or polygonal rubble, uncoursed or brought up to courses.

M&L for boulder filling dry, hand packed tightly as in faces of weep holes to retaining wall.

S&F in repair PVC (SWR) pipe 110 mm bore in any length cutting and placing in postion as in weep holes to retaining wall.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends etc.

M&L for 300mmdia reinforced concrete pipes class NP-2 laid and jointed complete with collars as directed by engineer in charge

M&L for 200mmdia reinforced concrete pipes class NP-2 laid and jointed complete with collars as directed by engineer in charge

M&L for concrete bed of PCC 1:4:8 type C2 using 40 mm graded stone aggregate for drain pipes bedding & hunching against the sides complete after pipes are laid, jointed and tested complete as specified

M&L for sand filling under floors including watering and consolidation complete all as specified & directed.

M&F 60 mm thick machine pressed precast concrete interlocking paver block (ISI Mark) M-35 grade as deign and pattern approved by GE as in path way / hard standing complete all as specified & directed.

M&F 80 mm thick machine pressed precast concrete interlocking paver block (ISI Mark) M-40 grade as deign and pattern approved by GE as in path way / hard standing complete all as specified & directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described.

S&F in repair Pre painted galvatume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

dismanteling of structural steel work including doors, gate but excluding framed truss etc complete all as specified and directed.

M/s VIKAS TRADERS

Jyoti enterprises

Samaksh Enterprises

MODI CORPORATION

RAJPATI CONSTRUCTION

deepak mehra & associates

PADAMSHRI CONSTRUCTION CO

Bidder Name

CREATIVE CONSTRUCTION