Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.9 LAccepted-AOC 6 RAILWAY STATION ROAD ONKAR INDUSTRIES GULAMALI PURA BAHRAICH UTTAR PRADESH 271801 | BAHRAICH | UTTAR PRADESH | 271801 | L1 | Accepted-AOC L1 | |
| 2 | L2₹44.1 L+₹4.2 L (10.6%)Rejected-Finance WARD NO 1 HOUSE NO 04 SUBASH NAGAR UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance L2 | |
| 3 | L3₹44.9 L+₹5.0 L (12.5%)Rejected-Finance HOUSE NO 108 WARD NO 08 SHAKTI NAGAR DHAR ROAD UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-Finance L3 | |
| 4 | L4₹44.9 L+₹5.0 L (12.6%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹45.1 L+₹5.2 L (13.1%)Rejected-Finance B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L5 | Rejected-Finance L5 |
Tender Value
Refer Docs
EMD Value
₹89,800
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF UDHAMPUR
GE AF STN UDHAMPUR
ADDN / ALTN / IMPROVEMENT TO E/M SERVICE AT CERTAIN BUILDING AT 901 SU AIR FORCE STATION NATHATOP UNDER GE (AF) UDHAMPUR (GEAFU-41/2023-24)
2023_MES_614563_1
GE/AFU-41/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE AF STN UDHAMPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) UDHAMPUR
₹89,800
Yes
19 Dec 2023
19 Aug 2023
11 Sept 2023
19 Aug 2023
9 Sept 2023
2 Sept 2023
Amount
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 120 sq mm complete all as specifed and as directed.
Supply and fixing of cable jointing kit for 11KV grade cable for outdoor Straight through termination Heat shrink type joint with jointing material and accessories suitable for 3 core XLPE Armoued cable 120 sq mm complete all as specified and as directd.
Supply and fixing of cable jointing kit for 11KV grade cable for outdoor end termination Heat shrink type joint with jointing material and accessories suitable for 3 core XLPE Armoued cable 120 sq mm complete all as specified and as directd.
S&F of 2 pole structure of steel tubular HT poles 11 meter long from bottom to top including all iron structure in Zebra pattern 30 cm wide, with synthetic enamel paint in black and yellow colour up to 1.2 meter height from pedestal, including painting of steel sructure, cross arms, bracings, supports, clamps and back plates (all metalic parts) of steel tubular Pole complete , wtih two coats of aluminium paint complete all as specified and directed.
Supply and fixing of lightining arrestor expulsioin type complete (Each Set-03 Nos) with all fittings, transmission class, discharge capacity 65 killo Amp and height current with stand 100 KA outdoor type for 11000 Volts, including clamps, nuts and bolts, washers and connection to earth with 32mm x 6mm GI Strip / 4 mm wire complete all as specified and as directd.
Supply and fixing HT 11KV Out door type Gang operated air-break switch suitable for horizontal or vertical mounting fixed type complete with 9 insulator of rating up to 200 Amps Complete all as specifeid and as directed.
Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty ) 1100 volts grade with stranded aluminium conductor of size 185 sqmm 3.5 core complete all specified and as directed.
Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty ) 1100 volts grade with stranded aluminium conductor of size 120 sqmm 3.5 core complete all specified and as directed .
Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty ) 1100 volts grade with stranded aluminium conductor of size 95 sqmm 3.5 core complete all specified and as directed
M&L for Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.0 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.0 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid SurfacePVC conduit ISI Marked , heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. Make of conductor : Havells/polycab/KEI Note: Two runs each of 4.0sqmm cable and one RM of 4.0 sqmm cable as earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.
Point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through PVC surface PVC conduits, with new boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.
All as per above serial item here-in-before but for one 6 Amps socket outlet on the Independent board complete all as specified
M&L for supply and pouring of RoHS tested Earth enhancement Compound after mixing with water tested by NABL accredited lab in compliance to IEC 625611-7 or its latest IEC code with a resistivity < 0.12 ohm-m. It shall be free from bentoinite and other hazardous substances. It shall be a permanent, non corrosive material and will not leach any chemicals into the ground. It shall retain moisture even in high soil resistivity areas complete all as specified and as directed. Make : JMV or equivalent as approved by GE.
All as per serial item No 12 here-in-before but for one 6 Amps socket outlet on the same board
Point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through surface pvc heavey duty conduits with new boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. Make of conductor : Havells/polycab/KEI Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.
Supply and fixing Switch Piano,flush type single pole,oneway 6 Amps conforming to IS-3854 complete all as speciifed and as directed
Supply and fixing socket Piano,flush type single pole,oneway 6 Amps conforming to IS-3854 complete all as speciifed and as directed
Supply and fixing 15 Amps switch socket combination complete all as specifed and as directd
Supply and fixing Ceiling rose, surface bakelite 65 x 50mm, two to three terminals complete all as specified and as directed.
Supply and fixing LED lights fitting Four feet 1x20 Watt LED 6500K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.
M&L for Sheet metal enclosures for DBs SPN 8 way with 200Amps rated busbar including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / indoasian
M&L for MCB SPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. .(Make: Indoasian or its equivalent/legrand /CG)
M&L for MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. Make: of Legrand or equavalent to HAVELLS / SIEMENS/indoasian
Supply and fixing of Building security LED street light fitting 30 Watt 6500K pf >.90 efficency 100lm/W 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp fixing on wall, pole, building with suitable size of GI pipe medium grade bracket including fixing arrangement i.e. clamp, Nut bolt, fastiner etc impact and corrosion resistant including thermal management in multiple optics complete with IP 65 protection complete all as specified and as directed.
S & F of Recess mounting type LED indoor luminaire powder coated, CRCA or powder coated aluminium panel 600mm x 600 mm 35 / 36 watt,220 V AC recessed type with high efficency PMMA Diffuser soft glare free light complete with driver ,holders &Led lamp suitable for roof ceiling including connecting up with driver three cor flexible copper conductor cases of suitable size current at input voltage of 140volt to 285 volt AC, 50 HZ, THD less than 10%, life 50,000 burning hours minimum IP protection IP 20, powder coated housing with ashthetic bottom frame, with excellent heat dissipation through high thermal conductivity, high efficiency transulence diffuser, suitable for any type of ceiling system including connection with PVC insulated copper conductor 3 core cable of 0.50 sqmm complete including taking down all as specified. (Make Havells/Bajaj/CG or Equivalent.)
Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed
Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as fastners , safety valve, thermostate, NRV, connection piece bib tab etc complete all as specifeid and as directd
M&L Sheet metal enclosures for DBs SPN 2 way flush mounted including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS / indoasian
Supply and fixing of Steel water tubing medium grade galvanised ( ISI marked ) 15mm dia with all fittings such as bends elbows, Tee, short pieces, connectors back nuts, diminishing pieces, caps and plug, unions etc) complete all as specified.
Supply and fixing of Integral LED aviation light luminaire in yellow die-cast aluminium alloy housing with red coloured polycarbonate dome of cat part No BGAV 302 LED of make Bajaj or equivalent C&S/CG/Philips including necessary electric connection with PVC flate cable,PVC insulated,PVC Sheathed size 4.0sqmm 03 core of PVC copper cable and length of cable and length of cable is included up to 30 mtr as per manufacture's requirement, complete all as specified and as directed by Engineer-in-Charge.
M&L for MCCB three pole 415 Volts 50 Hz with miceroprocessor release 160Amps with breaking cap36KA complete all as specified and as directed.
M & L for PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.
M & L for PCC 1:2:4 type B2 (40 mm graded aggregate) as in copings etc complete all as specified and directed by Engr-in-Charge
Earthing complete with copper earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth electrode burried directly in ground (earth pit not less than 3.75 Meter deep below ground level) with top edge of the earth plate not less than 2.5mtr below ground level using copper earth strip 20 x 3 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including brazing etc of earth electrode and earth wire by means of welding, all as directed including providing watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion. Not: (i) Extra excavation of earth work more than 3.50 mtr shall be meassured and paid separately. (ii) The grid of earthing trhough earth strip to achieved earth resistance less than 01 ohm to05 ohm shall be deemed into the quoted rate and no extra payment shall be made to contractor. (iii) The test point shall be made after the grid of earthing and algebric sum of of strip with GI protation pipe shall be measured after 7.5 mtr earth pit.The strip beyond the total sum shall be paid seperately. (a) Soil shall be provided by the contractor from outside the MOD land for refilling the remaining portion of earth pit for increasing soil conductivity The Low rasistivity soil shall be measured and paid seperately. (c) Earthing will be carried out in presence of users and MES rep with entire satisfaction. (d) The ground enhansing material (GEM) / chemicals shall be added with soil and the .
Earth continuity conductor 20 x 3.00 mm copper strip or main earthing lead fixed to walls on batten or recess or chassis or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and directed by Engr-in-Charge
Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth burried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using GI earth lead wire 4.0 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion.
Supply and fixing of Earth continuity conductor or main 4 mm Galvanised iron wire fixed to wall on batten or recess or chases including or drawn in conduit/pipe or fixed to poles or any other indicatedsituation for loop earthing etc. Complete all as specified and as directed
S&F 80 mm dia GI tubing,light grade,for protection of cable passing across the road,under floor etc,complete all as specified and directed.
S&F ON load change over switch 415Volt, 50 HZ in sheet metal enclosures 4 pole of capacity 400 Amps complete all as specified and directed by Engr-in-Charge.
S&F ON load change over switch 415Volt, 50 HZ in sheet metal enclosures 4 pole of capacity 630 Amps complete all as specified and directed by Engr-in-Charge.
Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick as earth burried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using using aluminium strip 25 x 3 mm dia as earth continuity conductor connected to earth plate by means of aluminium thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion.
S & F Submersible pump set 20HP including 03 phase motor 415 Volt rated 50 HZ ,insulated copper winding etc , suitable for and upto 11 stages incluiding bearing,bush ,shaft,bowels,thrust bearing ,bronze impellers and cashing of pump etc comprising /suitable for directly coupled with motor stainless steel body for 250 mm dia borewell multi-stages ,discharge of 1000 LPM at 120 Metre head and complete with suitable end connecting tail piece ,NRV a complete all as specified and directed.
Supply and fixed star delta starter fully automatic oil cooled with auto transformer and first filling of transformer oil complete with suitable size cable for connection between starter to auto transformer suitable for 20 to 25 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and directed. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.
S&F of submersible flat copper stranded cable 1100 Volt grade of size 10 sqmm 3 core complere all as specified and directed.
Excavation in trenches in any type of soft / hard soil, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation / laying of pipes and getting out complete all as specified and as directed.
Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and as directed.
Removing excavated material (soils) not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.
M & L for Sand cushioning for 8 cm before laying the cable and then after laying the cable 15 cm width of trenches for protection of cables including punning down complete all as specified. Note :- Thickness of sand cushioning shall be the thickness after punning down.
Supply and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peack, size 300mm x 180mm x 40 mm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Brick tiles; common burnt clay building /ducts bricks’ sub-class `B’ Designation 75 (230mmx115mmx75mm)
S&F 80 mm dia GI tubing,light grade, with all fiiting for protection of cable passing across the road,under floor etc,complete all as specified and directed by Engr-in-Charge.
M&L for cross arms, bracings supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed by Engr-in-Charge.
S&F stay assembly 20mm diametre of stay rod complete with accessories as shown in electrical plate No 1 (loop type insulator,stay clamps,excavation and concrete measured seperately ) complete all as specified and as directed .
M&L for lopp type insulator ,vitreous porcelain white,brown or green small size with overall dimensions 65x90 mm clearance of hole 16 mm complete all as specified and as directed.
M&L for Galvanised stay strand,7/4mm complete all as specified and as directed.
Supply and fixing of High galvanized mast LEd light suitable for 9 lantern symmetrically fitted along with their control gear and having two point suspension system with stainless steelwire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike including RCC foundation as up to height 30 mtr complete all as specifed and as directedalong with undermentioned desciption (a) Mast Construction: The highmast shaft is in polyonal shape, coninously tapered sections having dimensions and thickness as required in the design made from high tensile steel confirming to BSEN 10025 grade S 355. The plate plasma cut and folded to form polygon of required shape and then welded along longitudinal seams. section lengths are typically designed and are such that transverse welding is not required. The details welding procedure and procedure qualifications are done as per the requirements of standard through renowned third party agency. The partial panetration welds done through GMAW and SAW are proven over a period of time in masts of heights and for all applications.The taper fit friction joints are assembled at site with equipements usually available at construction sites and site fabrication work is not required during assembly. The overlap required is 1.5 times the diameter at the joint. The edge of the door opening is reinforced to guard against buckling and is provided with vandal resistant locking device. The shaft is attached to the flange using full strenth butt welds with supplementary gussets provided between bolt holes. All steel work is generally galvabuzed other standards agreed in contract. (b) Mast Head Assembly: The mast head assembly is fitted with a three-six pulley system which can accommodate wire ropes and electric cables as per the requirements. The pulley is of non-corrodible material and run on self lubricating bush bearing with stainless steel spindle of diamtere appropriate for wire rope and miulti core flexible cable. Arrangement is provided to separate electric cables and steel wire ropes and also to prevent ropes and cables leaving the pulleys grooves. Pulleys are housed in a chssis intergral with a sleeve which slips over the top of the mast and is secured axially and in azimuth. Guides and stops are provided for docking the luminary carriage. The complete assembly is hot dip galvanized after fabrication. The pulley assembly is protected with a weatherproof hot dip galvanized canopy. Depending on the requirement we can provide 3 ropes and cables. We can also provide pulley arrangement for special application. (c) Luminaires Carriages: The luminariage is fabricated from ERW steel pipes designed to act as electric conduit with holes for cable entry. It is fitted with junction box mounting breaket(s) and is in two halves joined by bolted flanges to permit removal from an erected mast. Luminaires fixing arms and plates are welded to the carriage. Carriage is fitted with buffer arrangements to prevent damage to the mast finish during movement. Rollers or other moving parts are not required.
(d) Winches: Winches are completely self sustaining, self lubricating by means of oil bath, grooved double drum with a grear ratio of 53:1. Single gear and double gear design of winches are available in BEL range. Winches can be operated by a motor or maually. Power tools for operating the winch are available in integral or common versions. BEL winches have been rigorously type tested based on the relevant standards under the guidance and presence of experts from Indian Institute of Technology, Bombay- Mubai. (e) Suspension System: Suspension wires are stainless steel grade 316/304 of 7/19 (6/19 WSC) construction and are provided with stainless steel thimble and terminals. Normal suspension systems are with two continuous wire ropes without any intermediate joints. Suspension systems supplied by BEL are property designed with suitable clamps to prevent entangling of wire ropes and cables. This unique arrangement increases the life of the wire ropes and cables. Other types of suspension systems are also offered against specific requirements. (f) Electrical System: Multi core flexible power cables are provided for power supply, Cables are with EPR insulation, PCP sheathing and cotton braiding to get the required strength and flexibility. PVC insulated and PVC sheathed cables are also supplied in economy and popular systems. These cables terminate in the base compartment through specially designed metal cload plugs and sockets. At the mast head cables are connected to weather proof cast aluminum/HDG junction box on the luminaires carriage. The power cables are factory cut for ease of installation. A box is provided inside the base compartment of the mast for local MCB isolation of the power supply. Masts shall have facility for testing the luminaires at the bottom level for premium operating system (this facility is not provided for masts located in hazardous area). Masts in hazardous areas are with a flame proof plug socket unit at the bottom. (g) Earth point and Lightning Finial: A 12mm diameter GI bolt is provided on door stiffener in the base compartment as earth point. All standard masts are provided with a sighle spike lightning finial on the head frame at the top most point. The mast body acts as couductor and earth strip is connected to the mast door stiffener. (h) Foundation : Foundation bolt set comprises anchor plate with hight tensile studs. Mechanical properties ot the studs are given in the data sheet. As foundation bolts are very important in the structural safety of the system.supply these bolts as part of the total system. Exposed portion of the stud/nuts and washers are hot dipped galvanized to increase resistance corrosion. Note : Foundation shall be suitable for highmast and enverionment wind of 200km/hr &Temp -20' C to 45' C and snowfall and shallbe properly mainufacture desigined for as per direction of GE
Supply and fix 250 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv luminaire engergy saving, environmental friendly long life with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation complete as specified and directed Make Wipro/Crompton or equivalent approved by GE
Automatic High mast light switch NATURE SWITCH for automatic switching of High mast lights based on lux level of natural light. The sensor (nature switch ) along with suitable power contactor, MCB and support terminals should be enclosed in pole /wall mountable enclosure made out of rust proof, electric shock proof, termite proof and FR grade special moulding compund conforming to IP-54. The contactor, MCB and circuit wiring 16 sqmm copper shall be suitable enough to take load of 25 KW single phase load /8 KW load equally distributed over 3-phase (8 KW/phase), contactor rating 40 Amps(2 pole)and 40 amps 4 pole and MCB (single pole) rating 63 amps (SP-3 Nos) complete including sheet metal enclosure with stand made of suitable size angle iron and grouting of enclosure using cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) all as specified and directed by Engineer-in-Charge Make :- Healer and Model No. SWADEEP-02EC25kW 3 PHASE .
Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured,electric power cable (heavy duty ) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all specified and as directed.
Earth continuity conductor 25 x 3.00 mm Aluminium strip or main earthing lead fixed to walls/ pole on batten or recess or chassis or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc up to height 30 mtrcomplete all as specified and directed by Engr-in-Charge
M&L for Porcelain Insulators of size not less than 75mm long and 30mm thic for fixing earthing strips fixed with suitables screws, nut, bolts and washers etc complete all as specified and directed by Engr-in-Charge
M&L Air termination, single pointed aluminium rod 12mm dia and 300mm long Complete all as specifeid and as directed.
S&F tubes, 'medium grade', galvanised, with all fitting laid in walls/ trenches of 20mm dia all as specified & directed .
M&L of Test Point Terminal Block made of Gun Metal or Phosphorus Bronze size 75x75x25mm, drilled and screwed including 3 No. 8mm dia, 25mm long hexagonal Head Screw, complete all as per specified and as directed.
Supply, installation, testing, commissioning & electrically connected feeder pillar outdoor type, single door compartmentized with looking arrangement canopy at top weather proof, verman/dust proof of suitable size cubical type factory made of CRCA MS sheet 3.15 mm thick machine pressed of size 60x60x40 cm & angle iron frame 40x40x6 mm for legs and including grouted in PCC 1:2:4 type B1 (20 mm graded stone aggregate) suitable 440 volts AC 3 phase 4 wire bus bar 4 pole made out of suitable size copper strip capacity 200 Amps Fully mounted on procelain insulator enclosed chamber with open able shutter both sides comprising complete all as specified.
S&F -03 layers of polyester fabric coared with insulation nanomaterials used alongwith 02 layers of PU foam to create an air gap, faceltate with zipper on cover for easy access to top. Thickness of cover shall not less than 02 cm suitable for 40 °C ± 5°C to -15 °C ± 5°C suitable for size of PVC tank 500 ltrs complete all as specifed and as directed.
S&F -03 layers of polyester fabric coared with insulation nanomaterials used alongwith 02 layers of PU foam to create an air gap, faceltate with zipper on cover for easy access to top. Thickness of cover shall not less than 02 cm suitable for 40 °C ±5°C to -15 °C ± 5°C suitable for size of PVC tank 1000 ltrscomplete all as specifed and as directed.
All as above srl item but with heating element capacity -05 KW/1-KW. The electic elements are covered with polyester nonwovel fabric with 2.5 sqmm -3 core PVC insulated and PVC sheathed copper conductor with plug top. The length of copper conductor shall not to be less than 20 RM all as specified and directed of 500 Ltr PVC water tank complete all as specifed and as directed.
All as above srl item but with heating element capacity -05 KW/1-KW. The electic elements are covered with polyester nonwovel fabric with 2.5 sqmm -3 core PVC insulated and PVC sheathed copper conductor with plug top. The length of copper conductor shall not to be less than 20 RM all as specified and directed of 1000 Ltr PVC water tank complete all as specifed and as directed.
M&L 03 layers fo polyster fabric coated with insulation nano materials used with 02 layers of PU foam to create air gap, suitable of water tubing cover with velcro for griping around the pipe alongwith taping reinforced or plastic ties, the pipe cover thickness shall not be less than 02 cm all as specified and directed for 40 °C ± 5°C to -15 °C ± 5°C of following size of wate pipes.complete all as specifed and as directed.
25 mm dia
50 mm dia
DAVINDER SINGH
slathia construction works
PROACH ASSOCIATES BUILDERS & ENGINEERS
ANIKET TRADERS
shivom builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .