construction of Fabricated Store Shed at Leh

Amount

Earth work in execution by mannual means in trenches for foundation drains,pipes,cables etc. (exceeding 30 cm iand upto 1.5 mtr in depth,1.5 mtr in width as well as 10 sqm in plan) including disposed of excavated earthupto 1 mtr from cutting,edge,disposed earth to be levelled and neatly dressed in. (All kind of soil)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all kind upto plinth level (1:3:6) 1:Cement;3 Coarse sand 6 graded stone agg,20 mm nominal size

Centring and shuttering incl. strutting propping etc.and removal of form for:- A) Foundation-footings bases of colums etc for mass concrete.

Steel work in built tubular round,square or ractangular including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete.Hot finished welded type tubes.

Providing Corrugated GS Sheet roofing including vertical/curved surface fixed with polymer coated Jor L hooks,bolts and not 0.63 mm thick with inc. coating not less than 275 gm/m2

Providing and fixing UV stabilised,fibreglass reinforced splastic sheet roofing upto any pitch including fixing with polymer coated Jor L hooks,bolts and nuts 8 mm dia 9.I plain/bitumen washers complete but excluding the cost of purlins,rafters trusses etc.The sheet shall be manufactured out of 2400 TEX panel rouigs in corporaling minimum 0.3% ultra voilet stablizer in resin system under approximately 2400 psi and hot cured.They shall be uniform pigmentation and thickness without air pockets and shall conform to IS:10192 and IS 12866.The sheets shall be apoque ot translucent,clear or pigmented,textured or smooth as specified 2mm thick corrugated (2.5"or 4.2"or 6" or step down (2"or3" or 6") specified.

Supply and fixing rolling shutters of approved make made of reuired size M.S Laths,interlocked together through their entire length and jointed together at the end by end lock mounted on specially desiged pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation complete incl.the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 Part I and M.S top cover by required thickness for rolling shutters 80X 1.20 mm M.S laths with 1.20 mm thick top cover

Providing and fixing ball bearing for rolling shutters

Providing and laying dry stone soiling in horizontal any thickness inc. cost of stone

Cement concrete flooring 1:2:4 (1:cement 2: course sand 4: granded stone aggregate) Finished with a floating coat of neat cement including cement slurry,but excluding the cost of nosing of steps etc. complete 50 mm thick with 20 mm nominal size stone aggregate crushed.

Carriage of materials source to site by machinal transport incl.loading ,unloading and stacking etc complete A) Stone agg. avg lead 25 KM.

Sand avg lead 15 KM

INDUS STEEL CRAFTS

M/S S.P. FABRICATION

SONAM PHUNTSOG