CERTAIN BR REPAIRS TO BUILDINGS AND ALLIED WORKS IN WSA-I AND II AT AFS ADAMPUR

S&F mild steel angle iron conforming to FE-290 Gde E-250 as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all drilling, bolting or riveting etc. and similar works and embedding in concrete and screwing etc. complete all as specified and directed.

S&F mild steel bolts (machine made) with screwed on end with hexagonal or square nuts and washer other end 8-10 mm dia of neck and exc 5 cm long but n exc 10 cm long complete all as specified.

Dismantling of old chain link fencing of any description of weight n exc 4.0 kg/sqm from existing fencing fixed with steel or concrete posts complete all as specified.

Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rail, straining bolts etc including provision of binding wire etc complete all as specified.

Supply only chain link MS hot dipped galvanised coating fencing with grid size not exc 75 mm and weight not less than 3.00 kg/ Sqm complete all as specified. Note:- Weight of chain link fencing shall be measured through BOO

S&F Mild steel round bars 10mm dia and over cut to length, bent to shape required including bending spirally , hooking ends and binding with mild steel wire or securing with clips or welded to MS angle conforming to Fe-410 Gde E-250 quality- A etc complete all as specified.

S & F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed complete all as specified.

M&L for preparing steel and iron surfaces (new) of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified.

M&L for applying two coat (finishing coat) of synthetic enamel paint including preparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth, complete all as specified.

Dismantling of wrought iron of mild steel work of any description in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specficially provided for complete all as specified and directed.

Material and labour for PRECAST reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manholes covers and similar articles set in cement motar 1:4 at the site complete all as specified and as directed by the Engineer-in-Charge

Supply & Fixing Mild steel TMT bars 10mm dia & above , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (above or below ground level) complete all as specified and directed.

M & L for 100 mm thick, Cement concrete type D-2, 1:4:8 (40mm graded aggregate), etc completed all as specified and directed.

M & L for Chequered cement concrete tiles 25mm thick of any size and shape ,set, jointed and pointed in neat cement slurry in floors, with grey cement and no pigment including 20 mm thick screed bed in CM (1:6) , etc completed all as specified and directed.

Fixing only cement concrete paver block of any thickness as in footpath, parks, lawns, drive ways or light traffic parking etc. obtained from dismantled tiles or where floor is sunk , including 25 mm thick compacted bed of coarse sand , compacting complete all as specified.

M&L for cement concrete (1:2:4) type B-1 using 12.5mm graded stone aggregate as in coping including necessary formwork complete all as specified and directed

M & L for 75 mm thick, Cement concrete type D-2, 1:4:8 (40mm graded aggregate), etc completed all as specified.

M & L for 150 mm thick Cement concrete (1:1.5:3) type A-1 using 20 mm graded stone aggregate as in path, floors, paving and similar items including necessary formwork and cutting of dummy joints with diamond cutter 6 to 8 mm wide and 50 mm deep with area of each panel not exceeding 4.00 sqm complete all as specified and directed.

M&L for Forming 12mm thick Expansion joints , Thickness of concrete slab 150 mm filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ etc completed all as specified.

M & L for 40 mm thick Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in sub floors, sub bases, floors , paving etc including necessary formwork complete all as specified.

M&L for 75mm thick cement concrete1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer 50mm thick finished even and smooth without using extra cement complete all as specified and directed.

Demolition of stone / boulder, brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work using Sub class B bricks/Fly Ash lime fuel bricks or as specified in PS-II clause , straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified and directed.

All as per item No. 28 above here-in-before but except bricks complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc completed all as specified.

Material and labour for 15mm thick plaster on fair faces of brick work or concrete surfaces, finished even & fair W/O using extra cement mixed with WPC in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge. Note:- WPC shall be measured and paid separately.

Supply only water proofing compound complete all as specified and directed.

Material and labour for 15mm thick Plaster on fair faces of brick work or concrete surfaces, finished even & fair W/O using extra cement mixed with CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.

M & L for rendering 10 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed.

M&L for preparation of Newly plastered surfaces of walls, pillars, cornices etc and applying two coat of exterior acrylic emulsion paint in disruptive/ camouflaging pattern of four shades over a coat of acrylic based primer complete all as directed by engineer in charge.

M&L for preparation of new plastered wall surfaces complete all as specified and applying Two coats of acrylic distemper/distemper oil emulsion (OBD) over and including a coat of chalk whitening prepatory to distemper, complete all as specified.

M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M&L for preparation of New surfaces of PCC paths and Slabs etc and applying two coat of exterior acrylic emulsion paint in disruptive/ camouflaging pattern of four shades over a coat of acrylic based primer complete all as directed by engineer in charge.

M&L for repair and servicing of MS Sliding rollers 1 mtr wide having frame made out of MS Angle iron 65mmx65mmx6mm, rollers made out of GI pipe 60mm heavy grade fixed to frame @ 100mm passing through both sides bearings and axle rod 16mm to 24mm passing through both sides bearings and fixed with frame for smooth sliding of loads including changing damaged parts and oiling for smooth functioning complete all as specified and directed by engineer in charge.

M&L for preparation of old treated surfaces of PCC paths and Slabs etc and applying two coat of exterior acrylic emulsion paint in disruptive/ camouflaging pattern of four shades complete all as directed by engineer in charge.

Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.

Please Enable Macros to View BoQ information