Construction of 3 bays Bus Stand at Hassanpur in Distt. Palwal (Pdg. Street Light/Security Lights Only)

Amount

EARTHING AND LIGHTENING ARRESTOR Earthing with G.I. earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

Extra for using salt and char coal/coke for pipe earth electrode as required.

Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.

Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.

Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop earthing as required.

Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 1 O A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 1 O of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 8 Mtr Long pole with top dia 100 mm and bottom 200 mm with base plate of size 325 x 325 x 20 mm.

Supply and erection of weather proof M.S. box size 20 cm * 15 cm * 10 cm covered with 3.00 mm thick M.S. sheet hinged cover, locking arrangement, housed in wall, including the cost of 1 no. 16 amp. 415 volts SPMCB and 2 no. 63 amp. 415 volts neutral links fixed on hard wood board/ 10 mm Bakelite sheet in the M.S. box including painting and necessary connections.

B.S.E.N. 10025 High Masts Supply, installation, testing and commissioning of 16 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip , galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 no’s. luminarie loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 no’s steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete I all respect upto entire satisfaction of Engineer-in Charge. Thickness of Top and Bottom Section = 3 mm & 4 mm (minimum). Top Dia = 150 mm and Bottom Dia = 410 mm. Thickness of Galvanization - Top = 65 micron (minimum) and Bottom = 85 micron (minimum)

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia

RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 16m high mast pole

Supply and erection of cable on surface/ cable tray complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work 16 Sq. mm 2 Core armoured Cable .

16 Sq. mm 4 Core armoured Cable .

Supply and erection of under ground cable in pipe/ existing open / closed trench complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work 16 Sq. mm 2 Core armoured Cable .

16 Sq. mm 4 Core armoured Cable .

Supply and erection of 90 watts LED street light fittng with lense IP 66, HP dia cast aluminium hoising including erection of same on Pole with all labour and material required to complete the job in all respect upto entire satisfaction of Engineer - In- Charge.

Supply and erection of Single arm. G.I. Bracket made of 50 mm dia G.I pipe B class ISI 1.5 mtr. long with 25 mm dia G.I. bottom pipe with 75 mm dia 60 cm. long G.I. collar pipe, top covered with ornamental cap duly welded, painted 2 coats of aluminium paint on bracket and golden paint on ornamental cap including erection of same with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In - charge of work.

Supply and erection of LED flood light fitting including erection of same on pole/ parapet with necessary nuts & bolts and making necessary connection of same complete in all respect. 200 watt LED flood light

Supply and erection of PVC sheathed copper conductor cable 2 core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe complete in all respect upto the entire satisfaction of Engineer in charge of the work 1.5 sq.mm

KKM Engineering Solutions Pvt. Ltd.