Renovation of UPHC Tigra Sector-49 at Gurugram in Gurugram Distt.

Amount

Providing, laying and fixing ceramic & Glazed tiles/vitrified tile/of any size of approved make in floors/dados, laid in any pattern as specified over base of 3mm thick adhesive of reputed brands such as pidlite, Laticrete, Ferrouscrete & Valendure as per IS specification 15477-2004 using 5 Kg adhesive slurry mixed with pigment to match the shade of tiles including cost of tiles. Note:- the tiles shall be of premium quality (1st quality double charge of reputed manufacturer like. NITCO. KAJARIA. SOMANI, ORIENT BELL, RACK & SIMPOLO (N.S) Based on HSR 14.97)

Providing & fixing vitrified tiles of size 600mm X 600mm of approved make in skirting/dados laid in any pattern as specified over base of 20mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT,JONSONS & RAK(HSR 14.90)

Providing & fixing ceramic tiles/ anty skid tile of size 400mm X 400mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO,KAJARIA,SOMANI,ORIENT,JONSONS & RAK(HSR 14.91)

Providing & fixing Ist quality ceramic glazed wall tilesconfirming to IS 15622 (thickness to be specified by manufacturer)of approved make in all colors,shade except burgundy,bottlegreen,black of any size as approved by engineer-In Charge in skirting ,risers of steps and dados over12mm thick bed of cement mortor 1:3 coarse and jointed with grey cement slurry,including pointing in white cement mixed with pigment to match the shade complete. Size of ceramic Glazed tiles 300mm X 450mm(HSR 14.92 b)

Dismantling cement conglomerate/terrazzo floors 25 mm to 50 mm Thick including concrete base(HSR 8.25)

Dismantling white or coloured glazed tiles (HSR 8.38)

Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean (HSR 13.13)

Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping(HSR 14.4)

Factory manufactured Solid Flush Door Shutter, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position. (Note:- reputed make such as Duro, Green, Kitply will be used as approved by Engineer-in-charge). HSR 17.93 (a) - Note 1 under 17.18]. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.(ii) 30mm thick

(iii) 35mm thick

Factory manufactured wire gauze door and window shutters of commercial hard wood such as Hollock & Champ only. (non-coniferous timber other teak conforming to I.S. specification No. 1003, kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position. (Styles and rails of windows shutter shall be 75 mm wide. (i) 30 mm thick. [HSR 17.92 (i) - Note 1 under 17.18]. Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Factory-manufactured paneled & glazed door,shutters of commercial hard wood, such as hollock, champ, chikrassy & chaplash etc., (nonconiferous timber other than teak cnforming to I.S specification No. 1003 kiln seasoned), with 100 mm wide vertical styles, 150 mm wide lock rail, 200 mm wide bottom rail & 100 mm wide other rails, with panels of 12 mm thick commercial veneered both sides particle board or plywood of B.W.R. grade, hot pressed, including cost of iron hinges, screws, chocks/ cleats, stops, nails etc., complete, fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position)-(HSR 17.91a) 30mm thick(Note:- reputed make such as Duro, Green, Kitply will be used as approved by Engineer-in-charge). - Note 1 under 17.18].

Cost of aluminium fitting cokmplte for doors and windows, such as tower bolts, handles, etc., and screws for these fittings (excluding sliding bolt)- for single lead shutter(HSR 17.72a)

Providing and fixing sliding bolt with nuts and screws etc. complete- aluminium- size 300 mm x 16 mm(HSR 17.83b-i)

Providing & fixing PVC Rain water pipe 6 Kg Pressure of ISI Mark in cement mortor during masonery work. 100MM dia PVC pipe 6Kg. Pressure(HSR 13.89a) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. Make:- Supreme, Finolex, Prince

Providing & fixing PVC Rain water pipe 6 Kg Pressure of ISI Mark in cement mortor during masonery work. 150MM dia PVC pipe 6Kg. Pressure(HSR 13.89b) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. Make:- Supreme, Finolex, Prince etc

Providing & fixing PVC Bend ISI Mark 100MM dia PVC pipe 6Kg. Pressure(HSR 13.90a) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. Make:- Supreme, Finolex, Prince etc

Providing & fixing PVC Bend ISI Mark 150MM dia PVC pipe 6Kg. Pressure(HSR 13.90b) Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. Make:- Supreme, Finolex, Prince etc

Distempering with washable oil bound distemper (of approved manufacture) one coats on old distempered work.. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.59).

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work.(Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge)(HSR-16.60)

Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing(HSR 16.24)

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81)

Providing two coats of exterior acrylic emulsion paint. (Note:- Second quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). [HSR 16.79 (b)].

Painting one coat with synthetic enamel Paint in all shades on old wood-work, or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (Note:- First quality paint/primer of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.7).

Supplying and fixing glass panes including special metal sash putty of approved make glass panes 4 mm thick, exceeding 40 sq dm areas.(HSR 18.30 b)

Dismantling Roofing demolishing mud phaska in tile terracing.(HSR 8.8g)

Cement concrete 1:2:4 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified.(HSR 13.64)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (as approved by the Engineer-in-charge) EUROPEAN TYPE WATER CLOSET SUITE, SYPHONIC TYPE, Consisting of- Single trap symphonic W.C. Suite white (HSR 30.5a-i)

EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid. White plastic seat (Solid)(HSR 30.13 i)

PROVIDING AND FIXING IN POSITION BESTINDIA MAKE LARGE FLAT BACK or Angular lipped from Urinal 610 MM HIGH consisting of: Flat back lipped or angular urinal basin or VITREOUS CHINAWARE; (to the approval of the Engineer-in-charge)(HSR 30.25 i) Single Urinal White

PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary Size 550 mm x 400 mm with one no. tap(HSR 30.41 iv)

Providing and Fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples, washers flags for connection in tanks complete in all respects to the satisfaction to the Engineer-In-Charge. (HSR-30.119)1000 Ltr.

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STEEL SINKS WITH COMPLETE FITTINGS AS FULLY DESCRIBED IN ITEM NO. 30.51 ABOVE. 600 mm x 450 mm x 200 mm(HSR 30.53a)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRRON Mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or c INDIAN MAKE 600mmx450mm (HSR 30.71 a-i)

Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) Bib cock (HSR 30.75c)

Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) 15 MM STOP COCK Stop cock male and female end(HSR 30.76a-i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION C.P Brass 15 mm x 450 mm(HSR 30.82 b-iii)

CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating Size 450 mm x 450 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 40 kg with C.C. topping )(HSR 29.84a)

12 mm thick cement plaster 1:6(HSR 15.7)

15 mm thick cement plaster 1:6 on the rough side of single of half brick wall(HSR 15.12)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15 mm dia nominal bore(DSR 18.10.1)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore(DSR 18.10.2)

Dismantling Concrete cement concrete plain 1:2:4 mi(HSR 8.6d)

PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS WITH PLASTIC BALL 20 mm internal diameter(HSR 30.110 b-ii)

Providing salt glazed stone ware pipe grade 'A' in standard length of 600mm each pipe marked with IS 651 and their lowering, cutting,jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction to the Engineer-in-Charge(HSR 29.95) (i) 200mm dia

300mm dia

Recovery Items:-Bidder have to quote rate for recovery items at least or more than reserve price. The rate quoted against recovery items will not be included in the total amount rather it will be deducted while calculating financial statement of the agency.T Note:- The reserve rate/amount is minimum amount to be used as base for quoted purchase rate by the agency. No rates/amount below the reserve price will be entertained and reserve price will be considered for all purposes in case the agency quotes lesser than reserve price.-- Brick Tiles @ 4 .50 Each

(ii) Brick Bets @ 400 cum

Note-1 In Case of any difference in the unit & Nomenclature of any of the HSR/DSR items of Civil & PH work depicated in this DNIT and that given in HSR/DSR, the unit and nomenclature given in HSR/DSR shal lbe applicable . 2. Only reputed make material will be used (Make/ Brand exhibited in HSR/DSR and exhibited in approved standard document) as approved by the Engineer-in-Charge, while exeuting various items/ work at site.

Rajat Sehrawat

AJAY YADAV GOVT. CONTRACTOR

Bharat Singh