REPAIR / MAINT TO BOUNDARY WALL, PLASTER, CONCERTINA COIL, BARBED WIRE, GRATING ALONGWITH BDY WALL AT OLD MED COMPLEX, MUKHERJEE COMPLEX AGE B/R-I OF GE (N) UDHAMPUR

Amount

Demolition of brick work / stone masonry, built in cement mortar and removal of rubbish from site, complete all as specified and directed.

M&L for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed.

All as per serial item No. 2.00 here-in-above but except stones. Note :- Serviceable stone obtained from serial item No. 1.00 here-in-above shall be reused.

Dismantling of asbestos cement (corrugated, semi-corrugated etc.) sheets as in roof coverings etc, complete all as specified and directed.

M&L for raised pointing to random, uncoursed or brought upto courses stone masonry in cement mortar 1:4, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, with using old size bricks, built in cement mortar 1:6, complete all as specified and directed.

All as per serial item No. 6.00 here-in-above but except bricks. Note :- Serviceable bricks obtained from serial item No. 1.00 here-in-above shall be reused.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in lintels upto 1.5 mtr clear span, steps, railings upto 60cm in height, copings, apex stones, bed plates including weathering, slightly rounded or chamfered angles and throating and including necessary formwork, complete all as specified and directed.

S&F precast cement cncrete 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregates) louvres and jallies, 25mm thick (measured soiled) including all moulding and set in CM 1:4, complete all as specified and directed.

S&F prepainted coloured corrugated profiled Galvalume / Zincalume sheet with minimum 0.50mm TCT with BTM of 0.45mm thick, conforming to IS-513 (AZ-150 GSM, Al Zn alloy metallic coating 550 MPA yield stress as per AS-1397) as in roof covering / clading to walls, fixed with self taping screws, colour/ exterior coat of silicon modified polyster/ BHP x RW paint system 20micron top coat applied over 5 micron primer and a micron polyster back coat applied over 5 micron primer all fixed with galvanised self drilling self tapping fastener (12-14x55 with EPDM seals), complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls / ridges / valley gutters / facia of bldgs, fixed with self tapping screws or 'J' hooks and suitable arrangements as per site requirement, complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on faces of brick work or stone masonry or cement concrete surface with using water proofing compound, finished the surface even and fair without using cement, complete all as specified and directed. Note :- Cost of WPC shall be deemed to include in the quoted rates.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint, white or tinted, over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of plastered or un-plastered surface of old decorative walls, chajjas, balconies, facia etc. washing down, brooming down or steel wire brushing etc and applying two coats of cement base paint, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, mass concrete, sub base and floor, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in surface channels, drains etc, complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

Dismantling of wrought iron / mild steel works of any description and in any position, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, hold fasts etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, ladders, framed balusters including portions framed and hung as gates, pintle hinges, stops, hand made sliding bolts etc, conforming to Fe-290 Gde-E-165, complete all as specified and directed.

S&F 5mm thick insulated PVC wall lining honeycombed as per sample Sqm kept in GE's office, consisting of PVC insulated panels with approved colour and design printed PVC sheet used colour PVC sheet duly fitted into the wall including PVC sheet in strips feathered at the edges including removing and refixing electric switch boards & plates and covered with PVC stripes or beading after fixing wall panelling complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for preparation of new steel/ iron surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base of floor, floors etc, complete all as specified and directed.

M&L for machine pressed rubber moulded, manufactured / compacted by vibrating table method precast concrete interlocking paver block of any shape and size, confirming to IS:15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

M&L for machine pressed rubber moulded, manufactured / compacted by vibrating table method precast concrete interlocking paver block of any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

M&L for sand filling under floors, paver blocks or in foundations including watering, ramming and consolidation, complete all as specified and directed.

Re-fixing of interlocking tiles of any thickness, laid dry in position over sand cushioning including dismantling of existing tiles, complete all as specified and directed.

M&L for 10mm thick vitrified light shade coloured ceramic tiles (square/ rectangular), polished, area of each tiles not exceeding 0.36 Sqm, as in floors, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 10mm thick vitrified light shade coloured ceramic tiles (square/ rectangular), polished, area of each tiles exc 0.36 Sqm but not exc 0.64 Sqm, as in floors, skirtings etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floors etc, complete all as specified and directed.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in road side kerb stone etc. (of any section indicated) with plain fair faces including chamfers, weathering, throating etc. and setting in cement mortar 1:4 complete with joints to match, complete all as specified and directed.

S&F in repair galvanised 2 strand steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed. Note :- Each line wire to be measured and paid.

Restraining, resecuring including making good galvanised 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and directed. Note :- Each line wire to be measured and paid.

M&L for high tensile galvanised steel razer blade concertina coil including fish hook, long blade, medium and short blade, tear blade and the after stretch dia of coil should not less than 600mm including fixing with old existing fencing and properly fixing with MS angle with using 3 Nos GI clips per coil including dismantling of old existing concertina coil of any shape and size, complete all as specified and directed.

Dismantling fencing wire, chain link fencing, mesh fencing of any type and in any position etc, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and directed.

Supply only chain link fencing, galvanised mild steel wire of any thickness and any size of aperature, complete all as specified and directed.

M&L for hand rails, half round or other steel section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work, conforming to Fe-290 Gde E-165, complete all as specified and directed.

Demolition of stone slabs and tiles, laid dry or dry bedded or pointed of any description or thickness as in floors, aprons etc, complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite, laid/ fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from out side of MD land, complete all as specified and directed.

M&L for factory made, heavy duty, full body digital matt finish paving coloured tiles of size 300x300x10mm thick each for external use, laid over and including 15mm thick screed bed or bedding layer in CM 1:4 including jointed with neat cement slurry and pointed in coloured tile grout to match the shade of tiles, complete all as specified and directed.

M/s AKHIL SHARMA (BID ID -3493556)

MAHAJAN TRADING CO (BID ID -3496561)

M/S SHREE RAM DUBEY AND SONS (BID ID -3499887)

M/S SWASTIK ELECTRICAL AND CONSTRUCTION WORKS (BID ID -3493267)

KUMAR CONSTRUCTION CO (BID ID -3493604)

sohtra and co (BID ID -3493510)

M/S PARDEEP KUMAR (BID ID -3499290)