Construction of Kitchen shed with store room at Kizhakriuppu Panchayat Union Primary School in Iruppu Panchayat

Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessaryand refilling the sides of foundation with excavated earth in layers of notmore than 15cm thick well rammed and consolidated and depositing the surplus earth in all places shown by the departmental officers withinitial leads and lifts. etc.including levelling the sites complete complyingwith standard specifications and as directed In hard stiff clay, stiff blackcotton soil, sandy loams and ordinary soil. TNBP SS No 20B 23 & 24

Supplying and filling in foundation and basement with FILLING SAND in layers not more than 15 cm thick well rammed watered and compacted., complete complying to standard specification. TNBP SS No 24 & 25

Cement Concrete 1:4:8 (one cement , five sand, and Ten hard broken stone) Using 40 mm ISSHBG metal for foundation, flooring and rendering the op rough to take floor finish including watering wherever neccesary and laid in layers not more than 15cm thick compacting etc. completeas per specification and as directed TNBPP SS No. 28

Supplying and fabrication of steel including cost and conveyance of steel to worksite including labour for cutting, joining and welding if necessary including all labour charges for dying with binding wire etc, Completed to length, bending to shape and tying in position and forming grills for all R.C.C works.

Reinforced Cement Concrete 1:1.5:3 mix using 20 mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc, complete. Upto Basement

Supplying and erecting for sides & siffits including supports and strutting upto 3.29m height for plane surface in all floors incluidng cost and convayence and all labour charges etc. Below Basement

Bick work in cement mortor 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete Upto Basement

Providing & applying 12mm thick cement plasterin CM1:5 (1part of cement:5 parts of sand) to walls internally insingle coat at all levels to correct lineand level including chicken wiremeshatall jointsofbrickandconcretesurfaceswithminimumoverlapof 150mminalldirections,scaffolding, roundingofforchampheringofcorners,offsets, fin/ bands, projections, etc. andcleaningof surface, rakingout joints, rougheningof surface, chiseling the undulated surfacewherever necessary and curing, etc., all materialsandlabourcompleteinall respectsincludingall lead, liftanddescentand as directed.

Supplying and erecting for sides & siffits including supports and strutting upto 3.29m height for plane surface in all floors incluidng cost and convayence and all labour charges etc. Above Basement

Reinforced Cement Concrete 1:1.5:3 mix using 20 mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc, complete. Above Basement

Bick work in cement mortor 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete Above Basement

SupplyingSingleLeafSteelDoorswith18GSMsteelshutterofsize0.90mx 2.10m as per standard specification

SupplyingTwoLeavesSteelWindowswith18GSMsteelshutterand12mm Sq.mm Bar of size 0.90m x 1.30m as per standard specification

Supplying Cuddapah Slab of Thickness 20mm

Labour Charges For Fixing Doors

Labour Charges For Fixing Windows

Labour Charges For Fixing Cuddapah Slab

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 using 10 to 12mm guage hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc, complete complying with standard specification and as directed by the departmental officers,

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 using 10 to 12mm guage hard broken stone jelly including mixing of admixture, laing finishing and the top rubbed smooth with power trawl, thread lining, curing etc, complete complying with standard specification and as directed by the departmental officers,

ProvidingandApplyingCFTRI approved two component flexiblepolymer modifiedacryliccementitiouswaterproofingcoatingwithamix ratioof (5 Liquid:7Powder)totheRCCsurfacelikeRoof,bathroom, toilet,balcony& [email protected]/m2 in2coatsto achieve1.2mmDFT,having Elongation at break>120%as per ASTMD412, Tensile strength>1N/ mm2asperASTMD412,Adhesionstrength:0.80N/mm2asperASTMD 4541, crackbridgingupto2mmasperASTMC836. The finishedcost to includesurfacepreparation,makingcovingof50mmX50mmatall right anglesofwall JunctionwithPolymerRepairMortar and lay45gsmglass fibremeshover theanglefilletwhenthefirstcoat instillwet, treatmentof cracks completely as per specification

Providingandapplying20mmthickCementplaster inCementmortar1:3( Onepart of Cement andThreeparts of Sand ),to finishing theexposed surfacesofR.C.C. itemsofworkssuchasRoof (or) floorslabs,beams,and Sunshadesetc.tocorrectplaneand level includingscaffolding,hackingof surface,chiselling the undulated surface wherever necessary and curing etc.,allmaterialsand labour complete inall respects includingall lead,lift anddescentandasdirectedbytheEnineer incharge.Thisrateincludesthe cost of providingCement Mortar beadings for sun shades, steps,landing slabs,elevationetc.completecomplyingwithstandardspecifications.

Providing Cup-board Shutter with frame using termite / water proof plywoodof 19mmthickoverwhich laminatedsheet of 0.8mmthick fixed insidetheshutterand1mmthick fixed intheoutsideof theshutterusing fevicol alongwith necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the DepartmentalOfficers. Thedesignpattern,waterproof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on wor

Whitewashing two coatswith freshlyburntwhite shell lime inall floors includingcost of lime, bluepowder fevicol typegum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

ProvidingandapplyingEmulsionpaint finishof approvedmake&shadein two coatsoveracoatofapprovedprimerand2coatsofpatty togivean even shade as permanufacturer's instruction to the internal plastered surfaces includingpreparationof surfaces, scaffoldingetc. all completeas per drawings and specification for all heights

Paing new iron works such as stleel doors wondows, ventilators, window bar, balustrades etc, with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat etc, complete coplying with standard specification

SupplyingandfixingPVCRainwaterdownfallpipesof followingdiameter etc., complete

Wiring2x1.5sq.mm(22/0.30)PVCinsulatedunsheathedSC.cu.conductor of 1100Vgrade in suitablePVC rigidpipeonwall and ceilingwithPVC accessorieswithTWswitchboxwith influshwithwall coveredwithhylem sheet of 3mmthickwithpaintingof suitable colour for concealed PVC light/ fan point (SD No.25)

Supply and fixing of fancy glass shade and 15W LED Bulb

Wiring2x1.5sq.mm(22/0.30)PVCinsulatedunsheathed SC.cu.conductor of 1100Vgrade in suitablePVC rigidpipeonwall and ceilingwithPVC accessorieswithTWswitchboxwith influshwithwall coveredwithhylem sheetof3mmthickwithpaintingofsuitablecolour forconcealed PVCplug point (SD No.38) 5 pin plug point

SupplyandfixingofwatertightBulkHeadfittingwithguard(Philips/Bajaj / Crompton / Klite) suitable for incandencent lamp and 60Wbulb (SD N0.83)

Supply and fixing of 300mm (12") sweep (lightduty) AC exhaust fan complete with necessary wall opening and making good of the wall (SD 114)

Supplyand runof 2of 6 sq.mm(84/0.3) PVC insulatedSCunshenthedCu.Couductorof1100V grade on 7/20 GI bearer wire for service connectionmain (Fromelectric Post to service pipe) (SD No.64)

Provision for Name Board

Please Enable Macros to View BoQ information