Construction of Basket ball in Balaji Park under ward 92 Kidwai Nagar Zone-3.

earth work 2.1 (2.1,1) work in surface excavation not exceeding 30 cm in depth but ceeding 1.5 m In width as well as 10 sqm on plan including getting out d disposal of excavated earth upto SO m and lift upto 1.5 m, as directed Engineer-in- Charge: 2.1.1 All kinds of soil.o 0.30 M

Providing and laying In position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:6:12 (1 cement : 6 coarse sand (zone-Ill): 12 graded Brick aggregate 40 mm (nominal size)

Class-150 brick work in 1:4 cement, c. sand in foundation and pilnth etc all complete. Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plllinth in. Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying In position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 cement : 4 coarse sand (zone-Ill): 8 graded Brick aggregate 40 mm (nominal size)

Providing and laying In position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:6:12 (1 cement : 6 coarse sand (zone-Ill): 12 graded Brick aggregate 40 mm (nominal size)

12 mm cement plaster of mix 1:4 (l cement: 4 fine sand} 12 mm cement plaster of mix :- Rate-182.00 per 1 Sqm.

Construction of gullypit 0.60x0.60x0.75 as per KNN design etc all work Construction of gullypit of 0.60x0.60x0.75 m internal size with jali, labour, T&P etc, required for proper completion of work.

RCC work with cement approved coarse sand and 20mm approved stone ballast in proportion for raft foundation with 1:1.5:3 (1 cemnt 1.5 C. sand 20 mm size stone ballast) Reinforced cement concrete work In beams, suspended floors, roofs having slope up to 15• landlngs, balconies, shelves, chaDas, lintels, bands, plaln window sllls, staircases and splral stair cases above pllnth level up to floor five level, excluding the cost of centering, shuttering, finishing andreinforcement

M.S. or iron in plain work such as hevey size as fabrication of M.S. M.S. or iron in plain work such as hevey size as fabrication of M.S.

Providing and laying hot applied thermoplastic compound 2.5 mm thick reflectorising glass beads@ 250gms pe sqm area. Thicness of 2.5mm is exclusive of surface opplied glass beads as per IRC 35 the finised suurface to the level, uniform and free from atreaks and holes (Thermoplastic repeated bar marking) Providing and laying hot applied thermoplastic compound 2.5 mm thick reflectorising glass beads@ 250gms pe sqm area. Thicness of 2.5mm is exclusive of surface opplied glass beads as per IRC 35 the finised suurface to the level, uniform and free from atreaks and holes (Thermoplastic repeated bar marking)