Rate contract for Miscellaneous Electrical works in Factory for Two years

POINT WIRING: Supply & fixing of 1 light point Controlled with 1No 5/10 A modular type SP switch Make: Legrand/Siemens/L&T/GE, etc with 2 runs of 1.5 sq. mm FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including supply & fixing of 16 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. Make: Havells / fincab / Finolex

POINT WIRING: Supply & fixing of 2 light point Controlled with 1No 5/10 A modular type SP switch Make: Legrand/Siemens/L&T/GE, etc with 2 runs of 1.5 sq. mm FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including supply & fixing of 16 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. Make: Havells / fincab / Finolex

2 X 2.5 SQMM + 1 X 1.5 SQMM CU WIRING FOR POWER: Providing and laying of 2 runs of 2.5 sq mm and 1 runs of 1.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Finolex / Havells / FortuneArt / L&T / Legrand

2 X 4.0 SQMM + 1 X 2.5 SQMM CU WIRING FOR POWER: Providing and laying of 2 runs of 4.0 sq mm and 1 runs of 2.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Finolex / Havells / FortuneArt / L&T / Legrand

4 X 6.0 SQMM + 2 X 4.0 SQMM CU WIRING FOR POWER: Providing and laying of 4 runs of 6.0 sq mm and 2 runs of 4.0 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Finolex / Havells / FortuneArt / L&T / Legrand

4 X 10.0 SQMM + 2 X 6.0 SQMM CU WIRING FOR POWER: : Providing and laying of 4 runs of 10.0 sq mm and 2 runs of 6.0 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Finolex / Havells / FortuneArt / L&T / Gloster

4 X 16.0 SQMM + 2 X 10.0 SQMM CU WIRING: Providing and laying of 4 runs of 16.0 sq mm and 2 runs of 10.0 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Finolex / Havells / FortuneArt / L&T / Legrand

3C x 1.5 SQMM CU FLEXIBLE CABLE: Supply & laying of 3 core x 1.5 SQMM copper conductor flexible cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

3C x 2.5 SQMM CU FLEXIBLE CABLE: Supply & laying of 3 core x 2.5 SQMM copper conductor flexible cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

4C x 2.5 SQMM CU FLEXIBLE CABLE: Supply & laying of 4 core x 2.5 SQMM copper conductor flexible cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

4C x 4 SQMM CU FLEXIBLE CABLE: Supply & laying of 4 core x 6 SQMM copper conductor flexible cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

4C x 6 SQMM CU FLEXIBLE CABLE: Supply & laying of 4 core x 6 SQMM copper conductor flexible cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

5C / 6C x 6 SQMM CU FLEXIBLE CABLE: Supply & laying of 4 core x 6 SQMM copper conductor flexible cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

4C x 10 SQMM CU FLEXIBLE CABLE: Supply & laying of 4 core x 10 SQMM copper conductor flexible cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

4C x 16 SQMM CU FLEXIBLE CABLE: Supply & laying of 4 core x 16 SQMM copper conductor flexible cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

PROVIDING OF MODULAR TYPE IN-DEPENDENT SWITCHES & SOCKETS: Supply and fixing of 3 Nos 6 amps 3 pin multiple socket controlled by 3 No. 6 amps SP MODULAR switch and 1 No 16 amps 3 pin multiple socket controlled by 1 No. 15 amps SP MODULAR switch of approved quality, color & design shall be mounted on suitable cover plate with suitable MS box with inter connection complete as per site requrement.The box shall be mounted on concelled/ surfase of wall with all requred ccessories as per site condition. Make:Legrand/Crabtree

PROVIDING OF MODULAR TYPE IN-DEPENDENT SWITCHES & SOCKETS: Supply and fixing of 2 Nos 6/16 amps 3 pin multiple socket controlled by 2 No. 6/16 amps SP MODULAR switch of approved quality, color & design shall be mounted on suitable cover plate with suitable MS box with inter connection complete as per site requrement.The box shall be mounted on concelled/ surfase of wall with all requred ccessories as per site condition. Make:Legrand/Crabtree

SINGLE PHASE INDUSTRAIL SOCKET: Supply fixing, testing and proveing of 20A rated industrial socket distribution boards Universal mounting type with 2P+E 3 PIN controlled by suitable rating equvalent 2 pole MCB as per site requirement by supplying all necessory fixing accessories. Make:Legrand / Havells / L&T.

THREE PHASE 32A INDUSTRAIL SOCKET:Supply fixing, testing and proveing of 32A, 3P+N+E 5P) rated industrial socket distribution boards Universal mounting type with 3P+N+E 5P controlled by suitable rating equivalent 4P MCB as per site requirement for "Equipments" power supply. The boards shall be mounted on surface of the wall/ pillor or on suitable iron amgular frame or grounted at the flooring level at a height of 300mm to 450 mm as per site requrement, including grouting materials such as cement for patch works complete. Make:Legrand / Havells / L&T.

THREE PHASE 63A INDUSTRAIL SOCKET: Supply fixing, testing and proving of 63A ( 3P+N+E 5P) rated industrial socket distribution boards Universal mounting type with 3P+N+E 5P controlled by suitable rating equivalent 4P MCB as per site requirement for "Equipments" power supply. The boards shall be mounted on surface of the wall/ pillor or on suitable iron amgular frame or grounted at the flooring level at a height of 300mm to 450 mm as per site requrement, including grouting materials such as cement for patch works complete. Make:Legrand / Havells / L&T.

4 POLE 125A MCCB:Supply and fixing/replacement of 4Pole 125A Icu=50KA MCCB in existing panel/ enclousure with required cable end terminations ans all internal connections connections. Make: Legrand / Seimens.

4 POLE 160A MCCB:Supply and fixing/replacement of 4Pole 160A Icu=50KA MCCB in existing panel/ enclousure with required cable end terminations ans all internal connections connections. Make: Legrand / Seimens.

4 POLE 250A MCCB:Supply and fixing/replacement of 4Pole 250A Icu=50KA MCCB in existing panel/ enclousure with required cable end terminations ans all internal connections connections. Make: Legrand / Seimens.

4 POLE 400A MCCB:Supply and fixing/replacement of 4Pole 400A Icu=50KA MCCB in existing panel/ enclousure with required cable end terminations ans all internal connections connections. Make: Legrand / Seimens.

4 POLE 630A MCCB:Supply and fixing/replacement of 4Pole 2630A Icu=50KA MCCB in existing panel/ enclousure with required cable end terminations ans all internal connections connections. Make: Legrand / Seimens.

MCCB / MCB DISTRIBUTION BOARD Supply, Installation, testing and commissioning of the following factory made MCB / MCCB Distribution Boards (Double door type) IP-54 Cubicle / Enclosure made of 1.6 mm thick CRCA sheet steel, powder coated with approved shade and partitions to segregate phases with suitable 2 Nos of top & bottom cable entry end boxes. The DBs & Cable entry end boxes shall be mounted recessed / surface mounted on wall with suitable iron angle frame & all fixing accessories as per site and inter connection with number sleeves & crimping lugs complete. The rate shall include supply & fixing of 2 Nos (top & bottom) cable end boxes suitable for following DBs.make: Legrand POWER DB 8-Way TPN MCCB DB Incomer:. 1 No,160 / 200 A 4POLE (Icu=36 Ka) MCCB Out going: 04 Nos, 63 A ( Type 'C') TP MCB 04Nos, 32 A ( Type 'C') TP MCB

MCCB ENCLOSURES: Supply and fixing of MCCB Enclosure suitable to 4P 160A / 125A Icu =50 KA MCCB. Make: Legrand / Seimens.

MCCB ENCLOSURES: Supply and fixing of MCCB Enclosure suitable to 4P 250A / 400 A Icu =50 KA MCCB. Make: Legrand / Seimens.

4 POLE 63 A MCB WITH ENCLOSURE : Supply and fixing of 4Pole 63A MCB with Enclosure with required cable end terminations. Make: Legrand / Seimens.

4 POLE 32 A MCB WITH ENCLOSURE : Supply and fixing of 4Pole 32A MCB with Enclosure with required cable end terminations. Make: Legrand / Seimens.

4 POLE 100A ISOLATOR: Supply and fixing of 4Pole 100A ISOLATOR with Enclosure with required cable end terminations. Make: Legrand / Seimens/ HPL.

3 POLE 32A MCB: Supply and fixing of 3Pole 32A MCB in existing DBs with all internal connections as per site conditions as and when required. Make: Legrand / Seimens.

3 POLE 63A MCB: Supply and fixing of 3Pole 63A MCB in existing DBs with all internal connections as per site conditions as and when required. Make: Legrand / Seimens.

SINGLE POLE 20A MCB: Supply and fixing of single Pole 20A MCB in existing DBs with all internal connections as per site conditions as and when required. Make: Legrand / Seimens.

TRENCH MAKING: Digging of any type of road 600 mm x 300 mm width. After laying of cable inside HDPE pipe( which is in Contractors scope ) & refilled with normal soil (only Cable will be supplied by HAL).

LT CABLING: Supply & laying of 3.5 core 50 sq. mm (as per direction of EIC ) Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

LT CABLING: Supply & laying of 3.5 core 70 sq. mm (as per direction of EIC ) Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

LT CABLING: Supply & laying of 3.5 core 120 sq. mm (as per direction of EIC ) Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

LT CABLING: Supply & laying of 3.5 core 300 sq. mm (as per direction of EIC ) Aluminium conductor armoured cable of 1100 V grade existing trench under ground trenches available or on surface of the wall / cable tray by suppling all required fixing accessories as per site condition as directed by the EIC. Make:Universal (Unistar) / CCI / Gloster/ Nicco / Finolex

REGULAR MAINTENANCE ACTIVITIES: Identification of fault in the electrical power circuits includes cable routing, assisting technicians while attending breakdowns of machinery, cleaning of power DBs, LT panels, Switch boards, control panels, ceiling fans in canteen etc. as and when required and repair the same by replacing/ dressing of cables, conducts or reconnecting the termination as per requirement in the exiting LT panels/ DBs/ switch boards. However material is in HAL scope. Note: (1) Engagement of semi skilled person for 8 hours shall be considered a job for performing activities. (2) Vendor may required to perform the job any shift of HAL.

RUBBER MATS: Supply & Laying of 33 KV volt grade PVC insulation mats of size 2000mm X 1000mm cofined to IS at infront of existing LT/HT panels as per site requirement as and when required.

SINGLE PHASE 0.25 HP TO 1.0 HP Rewinding, repair, and reconditioning of the Single phase (0.25 to 1.0) HP motors on copper retention basis with class 'F' insulation by using polyester super enamelled copper( Make Shramic/ apple), with necessary sleeves, providing of varnish coating, reconditioning of shaft are necessary as per Guidance of EIC

Rewinding, repair, and reconditioning of the Single phase (1.25 to 2) HP motors on copper retention basis with class 'F' insulation by using polyester super enamelled copper( Make Shramic/ apple), with necessary sleeves, providing of varnish coating, reconditioning of shaft are necessary as per guidance of EIC

Rewinding, repair, and reconditioning of the Three phase (0.25 to 1) HP motors on copper retention basis with class 'F' insulation by using polyester super enamelled copper ( Make Shramic/ apple), with necessary sleeves, providing of varnish coating, reconditioning of shaft are necessary as per guidance of EIC

Rewinding, repair, and reconditioning of the Three phase (2 to 3) HP motors on copper retention basis with class 'F' insulation by using polyester super enamelled copper( Make Shramic/ apple), with necessary sleeves, providing of varnish coating, reconditioning of shaft are necessary as per guidance of EIC

Rewinding, repair, and reconditioning of the Three phase (5 to 7.5) HP motors on copper retention basis with class 'F' insulation by using polyester super enamelled copper( Make Shramic/ apple), with necessary sleeves, providing of varnish coating, reconditioning of shaft are necessary as per guidance of EIC

Rewinding, repair, and reconditioning of the three phase (10 to 15) HP motors on copper retention basis with class 'F' insulation by using polyester super enamelled copper ( Make Shramic/ apple), with necessary sleeves,providing of varnish coating, reconditioning of shaft are necessary as per guidance of EIC

Rewinding, repair, and reconditioning of the three phase (20 to 25) HP motors on copper retention basis with class 'F' insulation by using polyester super enamelled copper( Make Shramic/ apple), with necessary sleeves, providing of varnish coating, reconditioning of shaft are necessary as per guidance of EIC

Rewinding, repair, and reconditioning of the three phase (30 to 50 HP) motors on copper retention basis with class 'F' insulation by using polyester super enamelled copper( Make Shramic/ apple), with necessary sleeves, providing of varnish coating, reconditioning of shaft are necessary as per guidance of EIC

Repair, reconditioning and testing of (0.25 HP to 3HP) motors by replacing the suitable bearings(skf) and required necessary accessories as per requirement .

Repair, reconditioning and testing of (5 to 7.5 HP) motors by replacing the suitable bearings(skf) and required necessary accessories as per requirement .

Repair, reconditioning and testing of (10 to 25 HP) motors by replacing the suitable bearings(skf) and required necessary accessories as per requirement .

Repair, reconditioning and testing of (30 to 50 HP) motors by replacing the suitable bearings(skf) and required necessary accessories as per requirement .

SUBMERCIBLE PUMP MOTOR REPAIR:Rewinding, repair, and reconditioning of the 7.5 HP submersible motors with class 'F' insulation by using polyester super enameled copper( Make Shramic/ apple), with necessary sleeves, providing of varnish coating and replacing the thrust bearing sets(4 Nos bearing), impellers and guide wanes as per requirement guidance of EIC.

SUPPLY AND REPLACEMENT OF 6 AMPS MODULAR SWITCHS: Supply and replacement of faulty 5 AMPS modular type switch with new suitable switch and all internal connections on existing lighting control switch board as per direction of EIC: Make : Legrand /Anchor/ equivelent.

SUPPLY AND REPLACEMENT OF 6 AMPS SOCKET: Supply and replacement of faulty 6 AMPS modular type socket with new suitable socket and all internal connections on existing lighting control switch board as per direction of EIC: Make : Legrand /Anchor/ equivelent.

SUPPLY AND REPLACEMENT OF 16 AMPS MODULAR SWITCHS: Supply and replacement of faulty 16 AMPS modular type switch with new suitable switch and all internal connections on existing lighting control switch board as per direction of EIC: Make : Legrand /Anchor/ equivelent.

SUPPLY AND REPLACEMENT OF 16 AMPS SOCKET: Supply and replacement of faulty 16 AMPS modular type socket with new suitable socket and all internal connections on existing lighting control switch board as per direction of EIC: Make : Legrand /Anchor/ equivelent.

SUPPLY AND REPLACEMENT FAN REGULATORS: Supply and replacement of faulty fan regulator with new one and all internal connections on existing lighting control switch board as per direction of EIC: Make : Legrand /Anchor/ equivelent.

REPLACEMENT OF CEILING FANS:- Removal of faulty and ceiling fans and refixing the same after repair of fan providing of suitable capacitor (1 to 4 mfd) and hanging rubber hook as per guidance of EIC.

SUPPLY AND REPLACEMENT OF 6 AMPS PLUG TOPS : Supply and replacement of faulty 6 AMPS plug top with new suitable plug top and all internal connections on existing lighting control switch board as per direction of EIC: Make : Legrand /Anchor/ equivelent.

SUPPLY AND REPLACEMENT OF 16 AMPS PLUG TOPS :Supply and replacement of faulty 16 AMPS plug top with new suitable plug top and all internal connections on existing lighting control switch board as per direction of EIC. Make : Legrand /Anchor/ equivalent.

SUPPLY AND REPLACEMENT OF STARTERS: Supply and replacement of starters (0.5 A to 2.5A) with new starter and all internal connections on existing board as per direction of EIC: Make : L&T/Siemens/Havells/equivalent.

SUPPLY AND REPLACEMENT OF STARTERS: Supply and replacement of starters (2.5 A to 4 A) with new starter and all internal connections on existing board as per direction of EIC: Make : L&T/Siemens/Havells/equivalent.

SUPPLY AND REPLACEMENT OF STARTERS: Supply and replacement of starters (4 A to 9 A) with new starter and all internal connections on existing board as per direction of EIC: Make : L&T/Siemens/Havells/equivalent.

SUPPLY AND REPLACEMENT OF STARTERS: Supply and replacement of starters (9 A to 16 A) with new starter and all internal connections on existing board as per direction of EIC: Make : L&T/Siemens/Havells/equivalent.

SUPPLY AND REPLACEMENT OF STARTERS: Supply and replacement of starters (16 A to 25 A) with new starter and all internal connections on existing board as per direction of EIC: Make : L&T/Siemens/Havells/equivalent.

Supply and replacement of SS Electrode heaters with Teflon bushes suitable for existing 50KW boiler as when required as per site condition & as per direction of EIC.

Supply and replacement of existing Metal starter boxes with PVC Starter Hensile boxes as per direction of EIC: Make : Sintex / equivalent.

Supply and replacement of power contactors of (25 to 32A) operating voltage 410V / 230V as when required as per site condition or as per direction of EIC Make : Siemens / L & T / Sneider / TC or equivalent..

Supply and replacement of Auxillary contactors of (10 to 16A) operating voltage 410V / 230V as when required as per site condition or as per direction of EIC Make : Siemens / L & T / Sneider / TC or equivalent..

HAL/HD/MT/RT/24-25/17

Rate contract for Miscellaneous Electrical works in Factory for Two years

Description

Name of the Individual / Firm / Company: * (Mandatory)

Type of ownership / Legal Status [Attach copies of the original document defining the legal status]

Year of Establishment of Company/Business

Registered Office Address, Telegraphic Address, Telephone No., Website / email id, FAX No.

Correspondance Address, Telegraphic Address, Telephone No., Website / email id, FAX No.

PAN no

PF number (If any)

ESI number

GST registration number

Particulars of registration with various Government bodies (Attach documentary proof)

Contact details

Please enter Contact person name

I.T Returns for past 03 years

Enclosed

Enclosed

Enclosed

Maximum value of works executed during the following 05 years and it should be certified by Chartered Accountant. (In Rs. Lakhs)

Please enter maximum values of works (sum of all the works in the respective year) in Rs. Lakhs for all the years

DETAIL OF WORK ON HAND UPTO COMPLETION PERIOD OF SUBJECT WORK [Required for Bid capacity calculation] .Details are also to be furnished on Proforma-D

Name of Organization with address

Action plan / bar chart as to indicate the completion of work, within the scheduled time (contract period)]

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

Branch, Place

Bank Code No.

MICR No.

ECS No.

IFS Code

Bank Statement for past THREE months

Latest Over draft Facilities with Bankers

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the final date of submission of Tender.

Please enter Latest Solvency Details and upload the same

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender should be either of the following:. [ Work completion certificates along with LOA/PO/WO should be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender.

You are Not Eligible

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Brief Description of Work:

Completed value of Work in Rs.

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Name of The organisation

Brief Description of Work

Completed value of Work in Rs.

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Type of Work [ Incase of private works the same shall be supported with TDS certificate]

Name of The organisation

Brief Description of Work

Completed value of Work in Rs.

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

DETAILS OF TECHNICAL PERSONNEL AVAILABLE( if space provided is insufficient separate sheet to be uploaded with the same format as below)

Name of members or technical personnel available in the organization

PLANT, MACHINERY AND EQUIPMENT AVAILABLE [The Plant, Machinery and equipment (either owned or leased) that can be made available for this work must be furnished below].

Name of Machinery

Works of similar nature successfully completed in addition to Sl. No. (21) of Applicant Particulars (1) during the last 07 years ending last day for previous month.

Name of the work / project and location

Details of person holding the power of Attorney

Please enter Person holding the power of attorney

DECLARATION I

Please Accept the Declaration I

DECLARATION II

Please Accept the Declaration II

EMD details

SBI collect Ref No

Please enter Tender Document EMD Details