Renovation of Jalvidnyan Bhavan, Nashik for State Water Data Centre and Training Centre and furnishing of E-classroom at Jalvidnyan Bhavan, Nashik (Retender)

Amount

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. ;Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 283, Item code 1533

Dismantling flat wooden or A.C. Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete;Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 283, Item code 1524

Removing wooden or A.C. partition including frame work and stack-ing the materials as with all leads, lifts etc. complete;Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 284, Item code 1535

Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 226, Item code 1159

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. ;Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 283, Item code 1527

Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete . (;Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 285, Item code 1556

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. ;Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 284, Item code 1537

Removing the tar or coba and disposing of the material as directed etc. complete Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 198, Item code 937

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc.(Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 203, Item code 977

Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed (Additional Specification :As directed by Engineer in charge) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 219, Item code 1105

Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.(Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 285, Item code 1557

Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.vii) Tank capacity upto 20,001 to 30,000 litre.:As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 267, Item code 1409

Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete. viii) Tank capacity upto 30,001 to 40,000 litre.(Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 267, Item code 1410

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase systemin the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. (Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 286, Item code 1558

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. (Additional Specification :As directed by Engineer in charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 283, Item code 1531

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum,including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By mechanical Means Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 148, Item code 714

Providing and laying Cast in situ /Ready Mix cement concrete M-10 of trap/granite/quartzite /gneiss metal for foundation and bedding including bailing-out water manually, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete batch mix plant (Pan mixer) etc. complete with fine aggregate (Nnatural sand/ Crushed Sand V.S.I. Grade finely washed etc.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 169, Item code 820

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 172, Item code 830

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 174, Item code 835

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 175, Item code 840

Providing and fixing in position TMT FE-500bar reinforcement of various diaMetres for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels,pardies coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 182, Item code 864

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundation and plinth of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 189, Item code 882

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 189, Item code 885

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical sectionof shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 243, Item code 1229

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 242, Item code 1227

Providing and fixing sheet glass of 24 oz for all size including putty etc,complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 239, Item code 1213

Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. .Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 236, Item code 1195

Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. . Spec. No.: As directed by Engineer in charge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 252, Item code 1283

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. completeSpec. No.: As directed by Engineer in Charge:Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 202, Item code 970

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 202, Item code 959

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 201, Item code 951

Providing sand faced plaster externallyin cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 201, Item code 956

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 209, Item code 1020

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 209, Item code 1021

Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 207, Item code 1004

Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.. complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 207, Item code 1006

Providing and laying telephone black / Amba White /Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. (S.S.R. 2018-2019 ;page no. 275 Item no. 33.68 ;Additional Specification :Spec. No. As directed by Engineer in Charge.) Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 212, Item code 1045

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 208, Item code 1015

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. Spec. No.: As directed by Engineer in charge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 197, Item code 934

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.. Spec. No.: As directed by Engineer in charge.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 197, Item code 933

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Spec. No.: As directed by Engineer in charge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 266, Item code 1398

Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 266, Item code 1399

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 301, Item code 1626

Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 260, Item code 1351

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 260, Item code 1345

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete Spec. No.: As directed by Engineer in charge.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 264, Item code 1385

Providing and fixing chromium plated towal rod 16 mm dia and 75 cm. in length including all accessories complete. Spec. No.: As directed by Engineer in charge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 266, Item code 1396

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 262, Item code 1365

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete Spec. No.: As directed by engineer-in-charge.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 268, Item code 1416

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/wastepipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete Spec. No.: As directed by engineer-in-charge., Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 268, Item code 1417

Providing and fixing H.D.P container Sintex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters Spec. No.: As directed by engineer-in-charge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 268, Item code 1418

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 268, Item code 1420

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 269, Item code 1422

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 269, Item code 1424

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete .Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 276, Item code 1478

Providing and fixing 15mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 258, Item code 1328

Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 271, Item code 1447

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 271, Item code 1448

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 216, Item code 1083

Providing and fixing frame work of galvanised iron for suspended false ceiling which includes galvanised iron perimeter channels of size 27 mm and 0.5 mm thick having one flange of 20 mm and another of 30 mm along with perimeter of the ceiling, fixing in brick wall / partition with the help of rawal plugs and screws, suspending galvenised iron intermediate channels of size 45 mm and 0.9 mm thick with two flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanised iron hanger of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm thickness having curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 225, Item code 1148

Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders).Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 225, Item code 1150

Providing and fixing false ceiling of 15mm thick as per drawings including powder coated G.I. wall angle of 20 mm x 20 mm x 0.60 mm size, G.I. grid runners of size 15 mm x 38 mm at 600 mm center to center both ways and suspended using G.I. 3 mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 226, Item code 1152

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 218, Item code 1100

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. Spec. No.: As directed by Engineer in charge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 217, Item code 1088

Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 215 Item code 1072

Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6 mm size steel screws including fixture fasting. Complete as per direction of engineer in charge Spec. No.: As directed by Engineer in charge.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 244, Item code 1233

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 264, Item code 1377

Providing & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & 1.5mm laminate on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete Spec. No.: As directed by Engineer in charge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 341, Item code 1809

Stainless Steel sink of size 610 x 460 x 200 mm of nirali or equivalent make.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No.467, Item code 349

Providig and fixing wleded mesh fabric for guniting of mesh size 75 mm x 75mm and 10 guage thick including scaffolding etc.completeBasic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No.282, Item code 1517

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 238, Item code 1211

Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete Spec. No -As directed by Engineer Incharge. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 253, Item code 1291

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-batsBasic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 264, Item code 1384

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 167, Item code 812

Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm centerto-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) 900 mm girth (Surface Width).Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 228, Item code 1169

Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips, putty etc. complete. (b) 3.00 mm thick.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 247, Item code 1251

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete.Note:The work to be executed on prior approval of Superintending Engineer will be necessary Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 168, Item code 819

Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 48, Item code 208

Cleaning Septic Tank more than 1.5 Cu.M. capacity

Providing and Supplying BEST QUALITY WELCOME DOOR MAT made with Creel material. Of size 100 cm x 60 cm, Mass 5400 gm per sq. mtr. Thickness 22 mm , coloured with contrace boarder, As Directed by Engineer In Charge.

Providing and Supplying Rectangular, Incumbency board. Made of 3 mm thick Acrylic Sheet of colour as required, without frame, without lettering, with adequate wall hanging arrengement. As Directed by Engineer In Charge.

Providing and Supplying Rectangular photo frame of high quality fiber material. Weighted 450 gram per Sq m With photos fitted in. front glass and back. Adequate wall hanging arrengement. As Directed by Engineer In Charge.

Providing and Supplying, Acrylic embossed coloured, Name Plate, front in English/ Marathi. Mounting with stainless steel screws on location. As Directed by Engineer In Charge.

Providing inspection to each and every cladding stone of Jalvidnyan Bhavn, Nashik by professional person, filling the weather cracks and joints by guniting with appropriate binding agents as well as water proofing agents in each and every joint of granite tile ( Scaffolding is used given in Iten No 15 in abstract for this work)

Shooting of still photographs outdoor and indoor of construction and other works of building, bridges, roads etc. in District and outside district at any distances ii) 4" X 6" size (3 Copies)

Providing tools, Plants and Manpower Sevices Like Mazdoor Heavy male and Electrician for Shifting of Office Furniture, and Electrical Appliances Like Computers, Inverters, bAtteries, Xerox machine, Printers, Scanners, Plotters, as Directed By Engineer and on behalf of him. Without Causing disturbances in routing office work> To Fascilate free space in different office rroms/ Compartment for renovation work.And reshifting the same after completion of work. Without damages to furniture and structure etc complete as directed by engineer in charge

Conveying the material ( Inc. Debris, murum, clay etc.) upto 5 KM disposal of building rubish

Laborartory testing charges requred for material testing on the basis of testing frequency and charges fixed by vigilances and quality control circle for the current year as per separate statement attached

Providing Soling using 80mm size trap metal in 15 cm layer including filling voides with crushed sand/grit ramming watering etc. complete

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 191 , Item code 897

Providing weathered pointing with cement mortar 1:3 for stone/ Brick masonary including scaffolding and curing etc. complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 202, Item code 963

Filling in plinth and floors with contractors soil sand or murum in 15 cm to 20cm, layers including watering and compaction complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 152, Item code 744

Providing and fixing mild steel grill work for windows, ventilators etc.20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 253, Item code 1285

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 264, Item code 1377

Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 281, Item code 1505

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-batsBasic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 264, Item code 1384

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 210, Item code 1031

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 210, Item code 1031

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No. 168, Item code 819

Providing and fixing of colour coated Zinc aluminium ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm centerto-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) 900 mm girth (Surface Width).Basic rate vide PWD, Nashik District schedule of rates for year 2020-2021, Page No.

Garden Soil- Supplying on site Garden soil well sieved 90% pass through IS sieve of 10 mm size. Free from stone Rubbish like dried grass route and other such materials. The soil should be fresh from quarry. Colur of th Generally to be Red. The soil will be measured by measuring box( Farma). ( Item includes Royalty Charges, Transportation, Loading, Unloading ) lead charges for 30 km is considered.

Preparing Lawn (20 cm Depth)-Excavating the ground to a required depth of 20 cms Removing & conveying unwanted stuff to a required distances as directed. Filling fresh garden soil/silt& manure in excavated area in 3:1 proportion to a height of 20 cms mixing garden soil and manure throughly, well levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well establishment by watering, weeding, clipping, rolling, etc completed.

Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete

Providing and Fixing precast concrete panel wall having height of 2100mm. A precast wall consist of panels of dimensions 1500mm X 300mm X 50mm. A verical post of cross sectional dimensions of 75mm X 75mm and height of 2100mm if to be consider 1500mm center to center for holding the precast wall panels. A complete item is consist of all the required material, labours, curing and all the lead charges etc complete.

Note- For Detail Please refer Tender Documents

SHARAD ANANDRAO DEORE

VISHAL CONSTRUWELL

M/s Suchintan Developers

Pawar Patkar Constructions Pvt.Ltd.