T09 BMD I OMC II BTPS 2020 21

Amount

Overhauling/Servicing of Main-Steam line gate valve and Feed water line gate valves, control globe valve and NRV.(Size 250mm to 350mm)

Overhauling/Servicing of low load feed water line gate valve, control globe valve and H.P. valve

Overhauling/Servicing of pneumatically operated S/H, R/H, Spray Line Block Valve and Control Valve.

Servicing of H.P. Valve (Size 10mm to 25mm )

Servicing of H.P. Valve (Size 40mm to 50mm).

Servicing of H.P. Valve (Size 65mm to 80mm )

Servicing of H.P. Valve (Size 100 mm).

Servicing of H.P. Valve (Size 150mm to 200 mm)

Servicing of Soot Blower Safety valves.

Servicing of Boiler Drum Safety valve.

Servicing of Main-Steam /CRH /HRH Safety Valve.

Servicing of Air line valves, oil line valves and water line valves up to 1” size.

Replacement of pipe (Dia. 10mm to 40mm.)

Attending minor leakage from pipe, bend etc at different place of boiler side ‘0’ meter to ‘54’ meter.

Servicing of Electrically Operated Valves for Various Size(Size 40mm to 65mm)

Replacement/Refitting of gland packing

Replacement of gasket of manhole of boiler drum.

Replacement of Valve (Size10 mm to 25 mm)

Replacement of Valve(Size 40 mm to 65 mm)

Replacement of Valve (Size80 mm to 200 mm)

Replacement of Valve (Size 250 mm to 350 mm)

Leakage arresting from one corner of air chamber of wind boxes(01 Corner =01Job)

Overhauling of CRH/HRH - Blanking Device / safety valve of boiler drum/main Steam/cold reheat/hot reheat.

Fabrication of Stud along with Nut Size 22 mm to 50mm and Length=300mm.

Repairing & finishing of Bore in Bonnet of various Valves of size 150-350 mm.

Repairing of SADC and Wind Box.

Replacement of coal burner compartment assembly (Coal Burner Nozzle along with Tip) including shifting of required coal burner casting/tip at desired elevation/dismantling-assembling of coal burner inlet Elbow.

Checking/hot tightening/gland tightening of various valves installed at boiler per unit.

Support service for safety valve floating.

Servicing of APH Hoist.

Replacement of Bearing of Drum Section of APH Hoist.

Replacement /Repairing of Coupling of APH Hoist.

Replacement /Repairing of Input /Output Shaft of APH Hoist.

Repairing of Drum of APH Hoist.

Replacement/Adjustment of Brake disc

Replacement/Repairing of hook assembly

Strengthening of ‘I’ Beam by cutting/welding/grinding etc.

Replacement/Repairing of Trolley wheel & gear.

Checking and conditioning of hoist/overhead crane.

Operation of hoist/overhead crane during shutdown.

M/S M.K. TRADERS

U.S.Enterprises

M/S JAHANGIR ENTERPRISES