REPAIR / MAINT OF GI, DI, CI PIPELINE AT ARTY CENTRE AND ALLIED WORKS UNDER GE NASIK ROAD.

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed

Returining, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed

Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.

Taking up or down GI Tubing and connections including cleaning for refixing or removal to store of 15 mm dia size.

All as per Item No. 4.00 above but size of 20 mm dia.

All as per Item No. 4.00 above but size of 25 mm dia.

All as per Item No. 4.00 above but size of 40 mm dia.

All as per Item No. 4.00 above but size of 50 mm dia.

Refixing old GI Tubing and connection in New or old position (walls, Ceiling, Floors etc) of 15 mm dia size obtained from item 4.00 above incl new fittings such as elbow, tee, socket etc.

All as per Item No. 9.00 above but size of 20 mm dia obtained from item 5.00 above incl new fittings such as elbow, tee, socket etc.

All as per Item No. 9.00 above but size of 25 mm dia obtained from item 6.00 above incl new fittings such as elbow, tee, socket etc.

All as per Item No. 9.00 above but size of 40 mm dia obtained from item 7.00 above incl new fittings such as elbow, tee, socket etc.

Supply and laying GI tubing medium grade with all fittings and fixed complete laid in trenches or on wall/Ceiling of 15 mm dia size.

All as per Item No. 13.00 above but size of 20 mm dia

All as per Item No. 13.00 above but size of 25 mm dia

All as per Item No. 13.00 above but size of 40 mm dia

All as per Item No. 13.00 above but size of 50 mm dia

Supply and fix in repairs Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete of 20 mm dia size.

All as per Item No. 18.00 above but size of 25 mm dia

All as per Item No. 18.00 above but size of 40 mm dia

All as per Item No. 18.00 above but size of 50 mm dia

Supply & fix rubber gasket joint for flange end of 200 mm dia size.

All as per Item No. 22.00 above but size of 150 mm dia

All as per Item No. 22.00 above but size of 100 mm dia

All as per Item No. 22.00 above but size of 80 mm dia

Supply & fix machanical joint/Coller ISI marked for spigot end pipe of 300 mm size.

All as per Item No. 26.00 above but size of 250 mm

All as per Item No. 26.00 above but size of 200 mm.

All as per Item No. 26.00 above but size of 150 mm.

All as per Item No. 26.00 above but size of 100 mm.

All as per Item No. 26.00 above but size of 80 mm.

Supply & Fix only GI Machanical coller/Jeefpy joint with all assessories for 300 mm sizes.

All as per Item No. 32.00 above but size of 250 mm

All as per Item No. 32.00 above but size of 200 mm

All as per Item No. 32.00 above but size of 150 mm

All as per Item No. 32.00 above but size of 100 mm

All as per Item No. 32.00 above but size of 80 mm

Supply and laid spigot and socketed CI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size upto 150mm dia.

Supply and laid spigot and socketed CI fittings. Such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size 200mm to 300mm dia.

Dismantling/taking out unserviceable sluice valve of size 80mm to 300mm bore dia by opening/cutting rusted nuts, bolts etc all as specified and directed.

Supply and fix of 80 mm CI Rising Spindle sluice valve both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.0 ISI marked complete all as specified and directed.

All as per Item No. 41.00 above but size of 100 mm

Supply and fix of 150 mm CI Rising spindle sluice valve both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed.

All as per Item No. 43.00 above but size of 200 mm

Supply and fix cast iron double ball air release valves of size 80mm as per IS 14845, PN rating H-7 ISI marked complete all as specified and directed

Dismantling/taking out unserviceable non return valve of size 80 mm to 300 mm by opening /cutting rusted nuts, bolts etc all as specified and directed.

S&F 300 mm Non Return Valve ISI marked as per existing dimensions ,model etc including nuts bolts & washer bolts with rubber packing.

All as per Item No. 47.00 above but size of 200 mm

All as per Item No. 47.00 above but size of 150 mm

All as per Item No. 47.00 above but size of 100 mm

All as per Item No. 47.00 above but size of 80 mm

Cutting of road /hard standing for laying /dismentling of pipe line and making good surfaces matching with the existing surface after laying of pipe line.up to 30 cm

Fabricate,supply & fix stainless steel spindle and nut suitable for for 300 mm dia sluice valve complete with stainless steel nut and threding as per sample & directed by engr-in- charge

All as per Item No. 53.00 above but for 250 mm sluice valve.

All as per Item No. 53.00 above but for 200 mm sluice valve

All as per Item No. 53.00 above but for 150 mm sluice valve

All as per Item No. 53.00 above but for 100 mm sluice valve

Area clearance/levelling/excavation /digging at MES installations at any width and length by using JCB complete all as directed by Engineer-in-Charge. Note 1. The cost of POL included in quotated rates . 2. After Start and finsh of the work ,Hrs slips shall be provided by the contrcator 3. LOG Sheet shall be maintained duly signed by Engineer-in-Charge & JE.

Construction valve chamber with bricks masonry of size 90 cm x 90 cm x 90 cm (internal dimension) with 15 cms thick foundation using PCC (1:4:8), type D2, using (40 mm graded stone aggregate), 23 cm thick brick walls built in cement mortar (1:6), 10 mm thick plaster in cement mortar (1:4) on internal and external surface (above ground level), finished even and fair without using extra cement 5mm thick MS sheet cover including 40 x 40 x 6 mm thick angle iron frame fixed on 150 mm thick PCC (1:2:4), type B1, using 20 mm graded stone aggregate) as in including 25 mm x 6 mm flat iron hold fasts, handles, hinges with locking arrangement and applying two coats of synthetic enamel paint over one coat of red oxide primer to steel surface including excavation earthwork in hard / dense soil returning filling in. disposal of surplus soil to a distance n. exc 50 mtr outside MD land etc, complete all as specified and directed

Construction valve chamber with bricks masonry of size 60 cm x 60 cm x 60 cm (internal dimension) with 15 cms thick foundation using PCC (1:4:8), type D2, using (40 mm graded stone aggregate), 23 cm thick brick walls built in cement mortar (1:6), 10 mm thick plaster in cement mortar (1:4) on internal and external surface (above ground level), finished even and fair without using extra cement 5mm thick MS sheet cover including 40 x 40 x 6 mm thick angle iron frame fixed on 150 mm thick PCC (1:2:4), type B1, using 20 mm graded stone aggregate) as in including 25 mm x 6 mm flat iron hold fasts, handles, hinges with locking arrangement and applying two coats of synthetic enamel paint over one coat of red oxide primer to steel surface including excavation earthwork in hard / dense soil returning filling in. disposal of surplus soil to a distance n. exc 50 mtr outside MD land etc, complete all as specified and directed

Supply only following items for Swimming pool/ Water filteration plant for cleaning of Swimming pool/ Purification of water at filteration plant :-

Suction sweeper Brush suitable for MODI Make suction sweeper Model MB-200 (as per sample)

PVC Flexible Bangadi Pipe Heavy duty of size 50mm ISI Marked

Water testing kit (pH, Total Alkalinity, Chlorine, Calcium Hardness, Stabiliser) Make:Delibac Tech Pvt Ltd or equivalent as approved by GE.

Supply only Caustic Soda all as specified and direced

Supply only Pig Lead all as specified and direced

Supply only Copper Sulphate, form crystals, industrial grade, application fungicides,purity 24% copper, density 3.60 g/cm3 (anhydrous), molar mass 159.609 g/mol (anhydrous), appearance gray-white (anhydrous, MP 110 deg C, solubility in water 1.055 molal (10 deg C) as per IS specifications or eqvt as approved by GE.

Supply only Trichloroiscyanuric Acid TCCA90 Tablet with purity 90% in 25 Kg packing.

Supply only Hi-strength granular chlorination chemical with CIAS (Corrosion Inhibitor & Anti scalant), Description / Appearance : Dry, free flowing, consistent with granules (or Powder) and with out hard lumps or impurities. Toxic and Undesirable Substance : should not induce substance beyond acceptable limit as given in ISI0500 (2012) in treated and disinfected water. Packing - 45 Kg plastic Drums. Specification available Chlorine % by mass, Min 55-6- Moisture Content %5.5-10. Particle size (Passing through 1.70mm IS sieve):% by mass, Min 99.5 Stablity : Loss of chlorine on the basic of available chlorine, Max 1/15, water insoluble matter % 6, Calcium Hydroxide, Max % 4, Sodium Chloride. Max %15, Presence of corrosion inhabitor & anti scalant - Yes (To be rectified by E-in-C branch). Shelf life years 2 (Depending on storage conditions) Storage (temp) Degrees Celcius, max - 35 (Dry & Cool).

Supply only Allum Ferric grade-II good quality with additional requirement of purification of water containing lead (as per PH) 30 PPM maximum and arsenic (as 203 maximum) conforming to IS-229/1989 (forth revision) with amendment No. 1 & 2 complete for water treatment .

Supply only Crystal clear allum ferric good quality G-I as per IS specifications for swiming pool.

M&L for overhauling to 2 HP Suction Sweeper B 200 Capacity necessary greasing replacing defective parts and reassembling complete including taking to work shop and returning back after repair and testing for smooth working all as directed . (Note:-(i) Spares as required shall be measure & paid seperately against the relevant items as supply only (ii) T&P and transportation to workshop & return is included in quotated rates).

Supply only MECHANICAL SEAL Part No 535-022-00

Supply only MECHANICAL SEAL Part No 535-022-07

Supply only O RING SET

Supply only CABLE GROMMET

Supply only CABLE LEAD GROMMET

Supply only UPPER BEARING

Supply only LOWER BEARING

Supply only STRAINER

Supply only IMPELLER

Supply only IMPELLER DIFFUSER 1

Supply only IMPELLER DIFFUSER 2

Supply only IMPELLER GUIDE PLATE

Supply only IMPELLER WEAR PLATE

Supply only IMPELLER LOCK WASHER

M&L for rectification of water lekage pipe line upto 15-80 mm size including necessary excavation, joints, pipes etc all as specified and directed by Engr-in-Charge (Note : Excavation,fittings,pipe etc shall be measured and paid under Respective items of Schedule)

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 84,575.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

MANOVANDANA CONSTRUCTION (BID ID -3128613)

Srujan Associates (BID ID -3118226)

Abhiraj Enterprises (BID ID -3120860)

UNITED ENTERPRISES (BID ID -3129823)

Vinod Enterprises (BID ID -3118461)

Shree Sai Samarth Enterprises (BID ID -3118407)

SONA LAKSHMI ASSOCIATE (BID ID -3119501)

Bidder Name

MAHIMA CONSTRUCTION

UNITED ENTERPRISES

Vinod Enterprises

Srujan Associates

Shree Sai Samarth Enterprises

Abhiraj Enterprises

MANOVANDANA CONSTRUCTION

SONA LAKSHMI ASSOCIATE