Repair of SLDC building in 220 kv sub station Ablowal

Amount

CSR ITEM

Providing and fixing in position Chinaware European type water closet P trap or S trap (to the approval of the Engineer-in-charge) suite-consisting of 10 ltr. PVC flushing cistern supported on angle iron bracket, short bend 32 mm dia including cost of solid white cover complete in all respect and to the entire satisfaction of engineer in charge (Toilet seats) CSR Ref 30.4

Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.Size 550 mm x 400 mm (Wash Basin) CSR Ref 30.32 ii

Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand) including replacing unserviceable tiles, or bricks with newover and disposal of unserviceable material to the dumping ground within 50 m lead (The cost of new tiles or bricks excluded) CSR Ref 31.11

CC Gola 1:2:4 csr ref 13.55

Top khurra CSR Ref 13.45

Labour rate for repair of false ceiling CSR Ref 13.65

Finishing walls with acrylic smooth exteriorpaint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm CSR Specification 16.60

12.5 mm cp 1:5 CSR Ref 15.10

Dismantling concrete 1:2:4 CSR Ref 8.6 d

Providing and fixing non skid tiles of 300x300mm CSR Ref 14.72

Providing and fixing ceremic tiles on wall of 200x300 mm CSR Ref 14.125

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats) in class room CSR Ref 16.63

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish in class room CSR Ref 16.65

Supply and erection of PVC conduit pipe for wiring pipes including bends, junction box complete as per CSR (25 mm dia) CSR Ref 34.12 x

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position CSR Ref 18.4

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In?Charge. (Glazing and paneling to be paid for separately) :CSR Ref 17.45 a

Fixed portion for duct doors CSR Ref 17.45 b

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required CSR Ref 17.46 ii

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre?laminated particle board with decorative lamination on Both side

Providing and fixing double action hydraulic floor spring of approved brand\and manufacture IS : 6315 marked, fordoors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single pieceMS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer?in-charge.CSR Ref 17.48

Providing, laying in trenches to correct CSR Ref 29.43 a gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 110 mm o/d pipe CSR Ref 29.43 a

Cement concrete 1:2:4 for parking sheds REPAIR CSR Ref 10.13 a i

Brick work for repair work 1:5 CSR Ref 11.6

P&F Ball cock in tanks (a) Palstic ball cock with rod and plastic ball 40 mm i/d CSR Ref 30.96 v

P&F in poistion stop cock/ angle valve (a) CP brass 15mm stop cock CSR Ref 30.66 a

P&F in poistion bib cock (a) CP brass 15mm stop cock CSR Ref 30.65 a iii

Extra carriage beyoud 5 km and difference in quarry rates( cheap lending rates)

Fine sand

Coarse aggregate 13.2 mm

Coarse aggregate 11.2 mm

Coarse Sand

Bricks

M/s Mukul Kumar Prajapati

The A and T Coop LC Society Ltd Patiala

THE CHIRAG LABOUR AND CONSTRUCTIONS CO OP SOCIETY