Renovations to the existing wash rooms for DOT in 4th floor of CTO building Secunderabad

1) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

2) Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 3.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand).

3) Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.3rd course of half brick masonry.

4) Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100X58X1.90 mm.

5) Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

ii) 250x16 mm

6) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

ii) 200x10 mm

7) Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

8) Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

9) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete.

10) Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete.

11) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand).

12) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand).

13) Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

14) Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre.

15) Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)

16) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.

17) Demolishing cement concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) .

18) Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.

19) Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below.

20) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

21) Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

22) Providing and fixing wash basin with C.I. brackets, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm.

23) Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

24) Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe. 32 mm dia

25) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

26) Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729.

27) Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

28) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

i) 20 mm nominal outer dia. Pipes.

ii) 25 mm nominal outer dia .Pipes.

iii) 32 mm nominal outer dia. Pipes.

iv) 40 mm nominal outer dia. Pipes.

29) Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore.

30) Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length. 15 mm nominal bore

31) Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : 15mm nominal bore

32) Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia.

33) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm.

34) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick.

35) Cleaning of exisiting sewer lines, manholes etc. Cost includes all labour for removing the silt, slush, waste etc. and rodding the sewer lines and manholes by mobile sewer rodding equipment/manually from manhole to manhole to clear the blockage, chokages etc for proper functioning of sewer lines( The payment shall be made for removal of blockages in between manhole to manhole as one job with all above operations.)

36) Providing and fixing Pre-cast gully trap cover of INDO/KITTO make or equivalent of 25mm thickness of size 300 x 300 mm or of required size as per requirement for existing gully trap with necessary repairs etc all complete as per the directions of Engineer-In-Charge

37) Supplying and fixing in position precast RCC Man hole frame with cover, frame square of size 650 x 650 x 75 mm of approved make. The cover should be 40mm thick and provided with required quantity of reinforcement. The frame shall be fixed in cement mortar over the manhole opening and rounding of edges etc., shall be made complete all as per the directions of Engineer-in-charge.

38) Charges for demolising the existing WC pan with trap from position including surrounding lime concrete complete to minium required size to fix new WC pan with trap including jointing with the existing waste, refilling the surroundings with lime concrete and finishining the floor with cement concrete flooring using required quantity of Fosroc or equivalant liqued all complete as per the direction of Engineer-in Charge. (The rate includes the disposal of all the debris to the dumpimg ground)

39) Providing of sanitary pipes of UPVC SWR soil waste and vent pipes by cutting, removing, replacing with working pressure 6kgf/sq.cm conforming to IS : 13592 Type B including jointing with 'T' shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant. (i) Single socketed pipe. Rate includes cost of all accesories such as couplings, bends etc, onting the pipe line to the main pipe line etc. All complete and nothing will be paid seperately

i) 110mm diameter

ii) 75mm diameter

40) Providing and fixing CPVC ball valve in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete. 25 mm nominal bore

41) Providing and fixing CPVC union in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete. 25 mm nominal bore.

42) Dismantling anodized aluminium partitons, doors and other frames including carefully removing of the glass, prelaminated particle boards etc and including proper numbering and stacking at the required place in the building as directed by the Engineer-in-charge. (The rate includes rectifying of the damages made in the floors/masonry and concrete surfaces as directed by the Engineer-in-charge)

43) Fixing anodized aluminum partitions and doors / windows / Ventilators with available materials after making required sections as per the drawing for powder coated aluminum sections, particle board, glass panels, neoprene gasket and snap on beading) including fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions at top, bottom and sides with required PVC/Neoprene felt etc, aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required all complete as per the architectural drawings and the directions of the Engineer-in-charge.

44) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

45) Providing and fixing PTMT health faucet with PVC pipe of approved brand and manufacture including holder complete etc., as directed by the Engineer-in-charge.

46) Providing and fixing C.P. brass two in one bib cock 15 mm nominal bore of approved quality conforming to IS:8931. All complete etc., as directed by the Engineer-in-charge.

47) Providing and fixing Jaquar Sensotronic Sensor Flushing Valve For Urinal With Complete Kit or approved equivalent make and manufacture. Rate includes cost of materials, labour charges, taxes, all other incidentals and nothing extra shall be paid on any account. All complete and as per the directions of the Engineer - in - charge.

48) Providing and fixing Jaquar or approved equivalent make and manufacture Pressmatic Taps for wash basins / urinals etc Valve Auto Closing System. Rate includes cost of materials, labour charges, taxes, all other incidentals and nothing extra shall be paid on any account. All complete and as per the directions of the Engineer - in - charge.

Please Enable Macros to View BoQ information