REPAIR TO BOUNDARY WALL AND FENCING AT YOGENDER VIHAR AND BSO (SOUTH) AND INTERNAL PERIODICAL SERVICES IN CAMS 12 GASL DGIS IML AND 1 CBPO UNDER AGE B/R-I (S) OF GE (SOUTH) DELHI CANTT-10

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement or cement lime mortar complete all as specified and directed by Engineer-in-Charge.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified and directed by Engineer-in-Charge.

M&L for providing plain cement concrete, 1:2:4, type B0 (using 12.5mm graded stone aggregate) for fixing of angle iron and coping on wall including necessary form work complete all as specified and directed by Engineer-in-Charge.

Dismantling posts/strut (wood, steel or RCC) of any section embeded in natural or concrete ground including taking out embeded portion and making good complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and mixed with earth around, inlayers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete type C2 1:3:6 (using 40mm graded stone aggregates) in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Fe-290 (Gde E-65) Mild steel in flat, round or square bars, cut to required length including inserting in frame, welding and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, Galvanised, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by Engineer-in-Charge. NOTE:- (Each line wire to be measured for payment).

S&F for FE -290 (Gde E-165) rolled MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, fencing posts, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

BLANK

M&L for preparation of old decorated steel surfaces of any description not otherwise described, over 10 cm width or girth, and applying one coat of synthetic enamel paint ( Ist Quality) white or tinted( colour & shade as approved by GE) complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick/concrete surfaces including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick cement mortar plaster on brick or concrete surfaces in CM 1:4 finished even and smooth surface wihtout using extra cement on ext wall of up to four stories bldgs complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scraping down smoke soot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of Paris etc and there after applying one coat of Cement base paint on walls complete all as specified and directed by Engineer-in-Charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for Screed bed or bedding layer of cement mortar 20mm thick (1:6) for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

M&L for chequered cement concrete tiles 20 cm x 20cm x 25 mm thick in floors with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered or unplastered wall surfaces including pilasters and cornices etc including brooming down or steel wire brushing and applying one coat of white lime wash complete all as specified and directed by Engineer-in-Charge.

All same as per item No. 23 above but subsquent coat

M&L for preparation of old decorated plastered wall surfaces including pilasters and cornices etc including brooming down or steel wire brushing and applying one coat of oil emulsion distemper , white or tinted (colour & shade as approved by the GE ) complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing surfaces of wall by mechanical grinder and preparing surfaces with necessary wall care putty and applying two coats of oil emulsion distemper , white or tinted (colour & shade as approved by the GE ) over and including a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered / concrete ceiling surfaces including brooming down or steel wire brushing and applying one coat of white lime wash complete all as specified and directed by Engineer-in-Charge.

All same as per item No. 27 above but subsquent coat

M&L for preparation of old decorated wooden or wood based surfaces of any description not otherwise described, over 10 cm width or girth, and applying one coat of synthetic enamel paint ( 1st Quality) white or tinted (Colour & shade as approved by the GE) complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated steel surfaces of any description not otherwise described, over 10 cm width or girth, and applying one coat of synthetic enamel paint (Ist Quality) white or tinted (colour & shade as approved by GE) complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick plaster in CM (1:6 ) on concrete / brick walls finished even and smooth without using extra cement , in patches complete all as specified and directed by Engineer-in-Charge.

M&L for 10 mm thick rendering in CM (1:3) on ceiling finished even & fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of wall applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care Putty complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of ceiling applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass of any size, thickness, quality or description from metal frame nexc 1.5 sqm each complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exec 0.5 sqm each pane complete all as specified and directed by Engineer-in-Charge.

All same as per item No. 37 here-in-before but frosted glass pin headed type

Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.

Chaudhary Constructions

M/S Davinder Kumar

M/S.Parmod Johar

V M CONSTRUCTION

RISHU CONSTRUCTION COMPANY