RENOVATION OF SINGLE LIVING ACCN AND 2 QUARANTINE ROOMS IN KOTE BLDG COMPLETE ROOFING OF SINGLE LIVING AND KOTE OF 27 KAR BN NCC AT HUBLI UNDER GE BELGAUM

Amount

Dismantling asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings and taken as credit complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings of any description taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling clean sawn and fixed complete all as specified and as directed.

Description all as per item no :3 here in before but except timber

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.45mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge,Valley gutter fixed with self tapping screws and washers completec all as specified and as directed..Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Rolled mild steel roof trusses trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc. conforming to grade Fe 410-W ( Gde E - 250 ) quality 'A' complete all as specified and as directed

Supply and fix Mild Steel work as in wind ties for roof including securing bolts and cutting tops to shape etc. conforming to Fe-290 Gde E-165 complete all as specified and as directed

Material and labour for Preparing surfaces of wood ,new or old of any description and girth and treated with two coat of creosote oil complete all as specified and as directed.

Dismantling wall or ceiling boards or insulation boards/ slab any thickness fixed with nails including cover fillets and taken as credit complete all as specified and as directed .

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board with white/coloured and decorative surface finish 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling board complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing)and removal of rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15cm thick above or below ground level including removal of debris off the premises complete all as specified and as directed.

Material and labour for Premium quality Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match with the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. Note : Make of Ceramic tile :Johnson/Kajaria/Somany

Material and labour for Premium quality Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match with the shade of the tile laid over and including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note : Make of Ceramic tile :Johnson/Kajaria/Somany

Material and labour for Premium quality Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match with the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note : Make of Ceramic tile :Johnson/Kajaria/Somany

Material and labour for Premium quality Coloured Glazed ceramic tiles of size 350x250x 7 mm/ 450x 350x7 mm thick in vertical surface viz: skirting and dado etc set and jointed in neat cement slurry and pointed in white or coloured in skirting/dado laid over and including rendering 10 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etccomplete all as specified and as directed . Note : Make of Glazed Ceramic tile :Johnson/Kajaria/Somany

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed .

Material and labour for Coloured laminated chequered cement concrete tile of size 30cmx30cmx25mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floor over and including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed .

Material and labour for floor rubbing and polishing with wax polish including filling of joint in kota stone slab with machine complete all as specified and as directed.

Material and labour for 100 mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in flooring including necessary steel form work complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring including necessary steel form work complete all as specified and as directed.

Material and labour for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in flooring including necessary steel form work complete all as specified and as directed.

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Demolition of brick /Stone/ PCC block masonry work built in cement mortar of any description and in any position and removal of debris off the premises complete all as specified and as directed.

Material and labour for Precast cement concrete block masonry in cement concrete blocks in PCC 1:3:6 type C1 ( using 20mm graded aggregate) set in cement mortar CM 1:6 complete all as specified and as directed.

Material and labour for Brick work with subclass B old size bricks straight or curved on plan exeeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed

Material and labour for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in 1:6 cement mortar complete all as specified and as directed

Taking down cement plaster on brick or stone walls built in cement mortar including raking out joints ,hacking for key ,scrubbing down with water etc complete all as specified and as directed.

Material and labour for Providing cement concrete 1:3:6 type C1 (Using 20mm graded aggregate in coping/bed plates etc including necessary steel form work complete all as specified and as directed

Material and labour for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying three coats of white/colour wash complete all as specified and as directed.

Material and labour for Preparation of old plastered or un plastered surfaces of wall and applying two coat of white/colour wash complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer with alkali resistant priming paint over a preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed

Material and labour for Complete removal of existing treatment on wall with wire brushing ,scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of oil bound distemperover a coat of primer with alkali resistant priming paint over a preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed

Material and labour for Rendering 15 mm thick in CM 1:4 on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preperation of old /new surfaces of wall , brooming down and appyling two coat of exterior emulsion paint over a coat water based primer including necessary smoothness of surfaces complete all as specified and as directed.

Material and labour for Complete removal of old plastered/unplastered surfaces of wall , brooming down and appyling two coats of exterior emulsion paintover a coat water based primer including necessary smoothness of surfaces complete all as specified and as directed.

Material and labour for Raking of joints/pointing to random rubble masonry complete all as specified and as directed.

Material and labour for Keyed pointing to block in course or squared rubble,coursed or uncoursed or concrete block walling in (1:3) CM, complete all as specified and as directed.

Material and labour for Granite tile of 20mm thick machine cut as in partition, platform etc, bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over screed bed 15mm thick in C.M 1:6 compete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) of area exc 1.5 sq. m but n exc 4 sq. m each including builders hardware items and making wall edges good in shape complete all as specified and as directed.

Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) of area not exc 1.5 sq. m each including builders hardware items and making wall edges good in shape complete all as specified and as directed.

Taking down shutters of any description of area exc 2 sq. m each and taken as credit complete all as specified and as directed.

Taking down shutters of any description of area exc 1.0 sqm and not exc 2 sq. m each and taken as credit complete all as specified and as directed.

Taking down and refixing shutter of any description of area exc. 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter with lock rail and panel of 12mm thick veneered particle board ,medium density with commercial face veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix Second class hard wood plain solid straight chowkat or frame rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints fixed in position complete all as specified and as directed.

Supply and fix Factory made 30 mm thick second class hard wood, glazed and skelton shutters open rebated and prepared to receive glass gauze etc edges of framing plain ,chamfered or rounded , fitted with cut and mitred beads rebated sash bars any numbers for securing gauze etc divided into squares , size of members of shutters as specified in SSR Part-I section 8 caluse 8.24(a) complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed. Note : Make of Glass : saint gobain/Modi guard/Gold fish

Supply and fix Rolled mild steel frame work such as grills, gratings etc. With ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed labusters, walk ways, railings, framewok of water tanks and similar work con-forming to FE 290. Gde-E-165, complete all as specified and as directed.

Supply and fix Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and as directed .

Supply and fix MS butt hinges cold rolled medium weight 100mm size complete all as specified and as directed..(ISI MARKED)

Supply and fix 150mm long extruded section aluminium alloy anodised handles fabricated typecomplete all as specified and as directed. Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and as directed Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Aluminium alloy anodised sliding door bolt 300mm long with hasp and staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed. Note : Make of Aluminium anodised sliding door bolt : Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed. Make :Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix Helical door spring MS 300mm long ordinary rat tail pattern spring including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed. .(ISI MARKED)

Taking down pipe of 25 mm bore of any description and taken as credit complete all as specified and as directed.

Taking down pipe of 20 mm bore of any description and taken as credit complete all as specified and as directed.

Taking down pipe of 15 mm bore of any description and taken as credit complete all as specified and as directed.

Supply and fix Unplasticised PVC (UPVC) pipe 25mm bore of pressure rating 10 Kgf/cm2 with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Unplasticised PVC (UPVC) pipe 20mm bore of pressure rating 10 Kgf/cm2 with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Unplasticised PVC (UPVC) pipe 15mm bore of pressure rating 10 Kgf/cm2 with all fittings and fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Removing building materials ,debris etc. to a distance of 2.50 Km including loading, unloading and levelling of ground complete all as specified and as directed.Note : One Load=200 cft

Material and labour for PVC (SWR) nahani/floor trap plain with grating of 75mm dia outlet including jointing with solvent cement complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix PVC squre or round shape grating of 150mmSize (Make: Prayag) Minimum weight :100 gms complete all as specified and as directed.

Supply and fix in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm, complete all as specified and as directed. Note :Make :Nirali/Joyna/Blue Star

Supply and fix in repair 15 mm bore Sink tap swan neck body, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed.Note:Make :ESSCO By Jaquar Cat Pat No COS-103347N or equialent

Supply and fix in repair 15 mm bore Pillar tap, cast copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed. Note:Note:Make :ESSCO By Jaquar Cat Pat No MQT-507 KN or equialent

Supply and fix in repair 15 mm bore stop valve cast copper alloy, chromium plated, fancy type screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed. Note:Note:Make :ESSCO By Jaquar Cat Pat No APR-101053 or equialent

Supply and fix in repair for Bib tap 15 mm dia cast copper alloy, chromium plated, screwed down high pressure for iron pipe of any type complete all as specified and as directed.Note:Note:Make :ESSCO By Jaquar Cat Pat No COS-103037 or equialent

Supply and fix in repairs 32 mm bore dia Waste coupling of PTMT (half or full threaded) (Minimum weight : 45gms), complete all as specified and as directed.Note:Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs 32 mm bore dia Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight : 260gms), complete all as specified and directed..Note:Make :Prayag/M/S Shakthi Industries

Supply and fix Vitreous china wash hand basin white flat back of size 550x400mm including waste coupling of PTMT 32 mm bore dia (Minimum weight:45 gms) , PVC waste pipe, PVC connection 600mm long including cutting for and pinning in ends of CI brackets or erecting stands etc complete all as specified and as directed..Note:Make :ESSCO By Jaquar Cat Pat No ECS WHT-801 or equialent

Material and labour for Rotational moulded polyethylene water storage tank of 1000 Litre capacity (cylindrical vertical with closed top) with all inlet and outlet fitings hoisted and fixed in position including dismantling of existing water tank of any description and taken as credit complete all as specified and as directed.Note:MAKE: Sintex/Infra/Polycon

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. and taken as credit complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75mm bore PVC (SWR) bend any radius with access door complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Taking down carefully Aluminum/copper point wiring complete for light, fan, 5 A socket, 15 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders and any type of electrical fittings etc complete and making good to disturbed area and taken as credit complete all as specified and as directed.

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6.00 Sq mm drawn through and including PVC casing and capping of suitable size with all necessary fittings fixed in wall/ceiling and Provn of one run of 6.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly including dismantling of old unserviceable submain wiring with aluminium conductor cable of any size and taken as credit complete all as specified and as directed. NOTE:(i) Two runs of 6.00sqmm and one run of 6.00 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/Havells (iii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Material and labour for Point wiring with 1.5 Sqmm size single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable drawn through PVC casing capping of suitable size with all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed.NOTE. (i) Make of PVC cable :Finolex/Polycab/Havells (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Description all as per item No. 87 here in before but for one fan point controlled by one switch and regulator.

Description all as per item No. 87 here in before but for one call bell point controlled by one bell push.

Description all as per item No. 87 here in before but for one 05 Amps socket outlet on independent board.

Description all as per item No. 87 here in before but for one 05 Amps socket outlet on the same board with other switches.

Description all as per item No 87 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix Modular switch piano type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix Modular bell push flush type 230V AC 6 Amps,complete all as specified and as directed.Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix Modular switch piano type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Crab Tree

Supply and fix in repairs Modular electronic type fan regulator 230 V , 120 watt step type, 2 module complete all as specified and as directed . Make : Anchor/Legrand/Rider

Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells

Supply and fix call bell, ding dong,230V AC supply complete all as specified and as directed. Make : Anchor/ Cona / Rider

Supply and fix in repairs or replacement of LED lighting fixture with aluminium heat sink energy efficient 20 watt LED 6K fitting complete all as specified and as directed Make Havells Cat No Lumiline plus or equivalent price and specification t in Crompton Greaves/Wipro

Supply and fix in repair LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up to driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note :Make :Havells Cat part no :PLUTONEO2X2PLR34WLED857S OR equivalent in Bajaj/CG/Philips

Supply and fix in repairs Decorative post top latern with LED lamp 25 watts including connecting up to driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Havells Model Ruby clear OR equivalent in Wipro/CG

Supply and fix Integral LED 25 watts security light fitting comprising of pressure die cast aluminium housing with high power LEDs & electronic driver including GI pipe medium grade and bracket of suitable size fixed to pole /wallcomplete all as specified and as directed. Make: Havells ENDURA Pearlr OR equivalent in Wipro/CG

Supply and fix Ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) including taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : Make:-Bajaj /Crompton/Orient

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ,heavy duty , copper winding with necessary grouting and fixing arrangements and provision of 3 core flexible FRLS PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed. Note : Make:-Almonard /Crompton/Orient/Havells

Material and labour for 50mm bore GI tube, medium grade as in supports for hanging ceiling fan of 1200/ 1400mm sweep, cut to required length, grouted into wall and making good distured surfaces as required complete all as specified and as directed.Note :Make of GI Pipe:TATA/JINDAL/PRAKASH SURYA

Supply and fix in repairs Single pole and neutral enclosure,powder coated, with a two pin earth plug and socket complete, 20 Amps, 240V,including provision of one single pole MCB 20 Amps 'C' curve type and taking down existing unserviceable SPN enclosures of any description and taken as credit complete all as specified and as directed.Note :Make :L&T/Indo Asian/Legrand

Supply and fix Sheet metal enclosure type TP&N Vertical Loadline DBs fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) 12 Way with double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and as directed..Note :Make :L&T/Indo Asian/Legrand

Supply and fix in replacement MCCB,TP,125 Amps , 10 KA , C Series current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed..Note :Make :Indo Asian/L&T/Siemen

Supply and fix Sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar double door type and including 2nd class hard wooden board 4cm depth with sunmica top of suitable size to fix the MCB DB, complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Supply and fix MCB DP 63 A 10KA C series 50HZ AC supply incl dismantling old unserviceable MCB DP of any description and taken as credit , complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Supply and fix MCB SP 240 Volt of capacity 5 to 40 Amps‘C’ series, complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 35 Sqmm, 4.0 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI/KEI

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in any type of soil up to top of drain pipe,laying of cable etc complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Returning, filling in including spreading levelling and well ramming in layers n exc 25cm thick with soil obtained from excavation from any type of soil complete. all as specified and directed

Removing of excavated material/surplus soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point for any type of soils complete. all as specified and directed

Supply and fix Galvanised iron water tube 'light grade' of size 40 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

M/S MAHADEV M PATIL

A. N. Kalbhavi

N K CONSTRUCTION

ASHIRWAD ELECTRICALS