PROVN OF VEHICLE PARKING SHED AT MACHHAL AND SPL REPAIR FOR ELECTRICAL REWIRING IN CERTAIN BLDGS AT DRUGMULLA UNDER GE 874 EWS

Amount

M&L for surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in Hard/dese soil complete incl removal complete all as specified and directed.

M&L cement concrete (1:2:4) type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 150 mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub-bases complete all as specified and directed.

M & L for 150 mm thick Plain cement concrete, (1:2:4) type B-1 using (20mm graded crushed stone aggregate) laid in alternate panels (not exc 2 m length) over sub base floors, pavings etc complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in Plinth protection complete all as specified and directed

M&L for excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspit, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out.in soft/Loose soil complete all as specified and directed.

M&L brick work with sub class 'B' old size brick straight or curved on plan etc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.in soft/Loose soil complete all as specified and directed.

M&L for Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for rendering 15mm thick fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth (without using extra lime or cement) mixed with water proofing compound complete all as specified and directed Note: Water Proofing compound to be measured separately.

M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.

S&F preprinted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screw including necessary scaffolding, any type, any location/height complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as formed in ridge shape, water channel fixed with self tapping screws including necessary scaffolding, any type, any location/ height complete all as specified and directed.

M&L for mild steel Fe -410-W(gde-E-250) Quality A Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, bands straps cleats etc complete all as specified and directed.

M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and complete all as specified and directed.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15cm long, Diameter of neck in 11 to 15mm complete all as specified and directed.

M&L for Forming contraction (Dummy) joints 65 mm deep 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/ conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc, covered with plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fixing in surface mount or concealed including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 25 herein before but wiring with 1.5 sqmm copper wire ( FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board complete all as specified and directed.

All as per item No 25 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 25 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.

S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body. complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed.

M & L for Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for single door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for single door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for single door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 12 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed.

S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed.

M & L for Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire, complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections, complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections, complete all as specified and directed.

Supply & Fix 35/45 Watts LED luminaries building security light, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source with IP 66 protection and including driver unit etc complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable of size 10 Sqmm complete all as specified and directed.

m/s mohd saleem and co (BID ID -3465188)

M/S SUMJI BROTHERS (BID ID -3464945)

MS NASEER AHMAD PEERZADA (BID ID -3463247)

GH MOHD SHAH AND CO (BID ID -3470172)

MS SHEIKH NADEEM AKBAR (BID ID -3468520)

sofihydraullicworks (BID ID -3469767)

M/S MUSHTAQ AHMAD BHAT (BID ID -3469169)

Concept Engineering & Constructions (BID ID -3464731)

Bidder Name

M/S SUMJI BROTHERS

M/S ABDUL AZIZ MIR

GH MOHD SHAH AND CO

Concept Engineering & Constructions

MS SHEIKH NADEEM AKBAR

sofihydraullicworks

m/s mohd saleem and co

MS NASEER AHMAD PEERZADA

M/S MUSHTAQ AHMAD BHAT