REPAIR REPLACEMENT OF SPARES FOR MECHANICAL LAUNDRY EQUIPMENT, OXYGEN MANIFOLD SYSTEM, INCINERATOR EQUIPMENT, UPS AND OTHER MISC WORKS AT MH UNDER AGE EM II OF GE U SEC BAD.

Amount

M&L for Economiser leakage rectifcation job for diesel boiler 600kg/hr including outer shell cutting and welding job,changing of inner smoke tubes which are got damaged including transport to work shop & service charges complete all as directed for Make of boiler:Thermax

S&F of 2000 Lts capacity rotational mountain polyethylene water storage water tank tripple layered(cylindrical vertical with closed top) as per IS-1270 - 1989 hoisted including 25 mm dia ball valve brass with polyethylene float and fly nut and fixed in position including suitable inlet & out let pipe line connections & necessary platform complete including removing existing unserviceable tank complete all as directed Make: SINTEX/POLYCON

Supply & fixing of 4 pole power contactor MCX-12,50Hz suitable for existing one and including taking down old unserviceable one complete all as direrected by Engr-in-Charge. Make: L&T/Schnieder/Siemens

Supply & Fixing following spare parts suitable to Drying Tumbler of capacity 50Kg including taking down old unserviceable spare parts complete all as specified and directed for Make of dry tumbler: Supershine

Digital Tempreature meter

Timer

Auxillary contacts

Contactor relay M L 1, 3 phase 415 volts

Contactor relay M L 2, 3 phase 415 volts

Auxilary relay

Revenger (Reverse Forward)

Main Motor -V-belt

Motor bearings

Blower bearings

Reduction gear bearings

Main bearing

Solenoid valve

Push button

Steam strap 15mm

Door Locks

Door Beading

Exhaust Fan/Blower

1/2" Steam Valve

3/4" Steam Valve

Reduction gear V-belt

Brake actuator

Supply & Fixing following spare parts suitable to Hydro Extractor of capacity 25Kg including taking down old unserviceable spare parts complete all as specified and directed for Make of Hydro extractor :Supershine

Contactor M L 1, 3 phase, 415 volts

Timer relay

Transformer

Timer

Buffer

Limit switch

Main motor bearings

Push button

Motor to body springs

Rubber bush for Hydro Extractor

Hydro Extractor motor bearings

Bridge rectifier

Diode

Body Spring support Bolts

Supply & Fixing following spares suitable to Washing machine 50Kg, including taking down old unserviceable spare parts complete all as specified and directed for Make of wahing machine: Supershine

Digital Tempreature meter

Timer

Contactor relay M L 1, 3 phase, 415 volts

Contactor relay M L 2, 3 phase, 415 volts

Relay M L 1, 3 phase, 415 volts

Relay M L 2, 3 phase, 415 volts

Revenger (Reverse Forward)

Water Level Indicator

Steam solenoid Valve

Drain valve actuator

Main motor V-belt

Aux Motor V-belt

Washing Machine main bearing

Reduction gear bearing

Water inlet solenoid valve suitable for 50 kg washing machine

Water outlet solenoid valve suitable for 50 kg washing machine

Gland rope

Main motor bearings

Aux Motor bearings

Toggle swtich

Supply & Fixing following spare parts suitable to Boiler of capacity 600Kg/Hr including taking down old unserviceable spare parts complete all as specified and directed for Make of boiler: Thermax

Gland Washer (HTN-8)

Valve seat Assembly

Metalic Hose 3/8" x 40"

Oil Seal (HTN-5)

Oil Seal (HCA-7)

Ball Bearings (HCA-5)

Pressure Switch PVF 1.0

Pressure Switch PVF 16

Metallic Hose 1" x 1.2m

Limit Switch

Photocell 8205

Sequence controller MA 810

Solinoid Coil

Electrode Assembly

Electrode Cap

High Tension Wire

Packing Hylam

Packing Asbestos

Gland Nut (HTN-6)

Oil Level Indicator

Sight glass 50mm

Ignition Transformer 14.5 KV

Temperature Controller 0-400V

RTD Assembly 2.5 mtrs

Safety valve 25mm

Plug & Socket

Hooter 4" Dia

Lip Seal

Spider for love joy couple

Burner rod Without nozzle

Fuel Pump

Diffuser Plate 132mm dia

Nozzle 6.5 GPH, 45 Degree

Disel line Y strainer 25mm dia

Disel line globe Valve 25mm dia

Steam line Y strainer 25mm Dia

Steam line Globe valve 25mm Dia

Steam line Y strainer 40mm Dia

Supply & Fixing following spare parts suitable to flat Bed press including taking down old unserviceable spare parts complete all as specified and directed for Make of flat bed press : Supershine

Steam Hose pipe 4 feet

Solenoid valve (pneumatic)

Air regulator

Contactor ML 1, 3 Phase, 415 Volts.

Digital temperature Meter

Digital timer

Pneumatic piston

Teflon foam

Heat proof cloth

Spring set

Steam traps 15mm dia

Supply & Fixing following spares suitable to Washing machine 100Kg including taking down old unserviceable spare parts complete all as specified and directed for Make of washing machines: Supershine & Megha laundry

Digital tempreature meter

Timer

Contactors ML 1, 3 Phase, 415 Volts

Contactors ML 2, 3 Phase, 415 Volts

Contactor relay M L 1, 3 phase, 415 volts

Revenger (Reverse Forward)

Water Level Indicator

Steam solenoid valve

Drain valve actuator

Main motor V-belt

Aux motor V-belt

Washing Machine main bearing

Reduction gear bearing

Indicator

Water inlet solenoid valve suitable for 100 kg washing machine

Water outlet solenoid valve suitable for 100 kg washing machine

Gland rope

Door Lock Knobs

Steam Valve (Globe)

Main motor bearings

Aux motor bearings

Toggle swtich

Supply & Fixing following spare parts suitable to Air Compressor of capacity 5HP including taking down old unserviceable spare parts complete all as specified and directed.

Limit switch

Motor bearings

Compressor Bearings

Piston Kit

Supply only following items all as specified and directed.

Wax (Candle Powder)

Grease (Castrol Make)

Chemical salt

PPM Testing Liquid Set

Laundrex softener chemical

Laundrex Det

Laundrex boost

Laundrex neutral

Meghana Liquid Bleach

Supply & Fixing following spare parts suitable to Slucing machine 7 Kg including taking down old unserviceable spare parts complete all as specified and directed for Make of slucing machine : Supershine

Controller

Timer

Motor V-Belt

Bearings

Steam Solenoid valve

Main Bearing

Manual Timers

Indicators

Supply & Fixing spare parts suitable to calender Machines including taking down old unserviceable spare parts complete all as specified and directed for Make of calender machines: Supershine & Megha laundry Eqpts

Variable frequency drive

Padding cloth

Blower Motor Rewinding

Temperature Meter

Speed Regulator

Push buttons (Red, Green,Blue)

NO-Element

NC-Element

Toggle Switch

Steam Solenoid Coil 15 mm

FLR Unit

Steam inlet Braided hose pipe 1" x 2 ft

Pneumatic cylinders servicing only except spares

Wax for cleaning chest

Guide Ribbons

Painting for feeding plate

Grease for chain and gear wheel teeth

Steam trap servicing

Air line and steam line with all connectors

Lubrication oil and gear oil

Steam line Y strainer 25mm dia

Disconnecting of Motor from washing machine/ Hydro extractor/ Drying tumbler/flat bed press machine/bioler/any other equipment in laundry plant etc and material and labour for re-winding of electric motor with super enameled copper wire of good quality with same gauge and same size complete with all accessories including varnishing the winding for improvement of insulation by heating method and reassembling, installing, commissioning and testing after repair / rewinding, greasing and gland packing & necessary balancing arrangement with rubber bushes complete including transportation charges from site to work shop and back to its original position complete all as specified and directed for the following capacities:-

up to 2 Hp

above 2 HP to 5Hp

above 5Hp to 10Hp

M&L painting of boiler cylinder 600 Kg/hr including scraping the old paint, preparation of surfaces and apply two coats of metal primer and painting with two coats synthetic enamel paint of existing colour complete all as specified and directed.

M&L descaling of the following laundry equipments with approved descaling chemicals complete all as specified and directed.

Washing machine of 100 Kg capacity

Washing machine of 50 Kg capacity

600 Kg/hr boiler

MS tank of capacity 2000ltrs

Supply & Fixing following spare parts suitable to Hydro Extractor of capacity 50Kg including taking down old unserviceable spare parts complete all as specified and directed for Make Hydro extractor :Megha laundry Eqpts

Contactor M L 1, 3 phase, 415 volts

Timer relay

Transformer

Timer

Buffer

Limit switch

Main motor bearings

Push button

Motor to body springs

Rubber bush for Hydro Extractor

Hydro Extractor motor bearings

Bridge rectifier

Diode

Body Spring support Bolts

Supply & Fixing following spare parts suitable to Air Compressor suitable for capacity up to 2HP including taking down old unserviceable spare parts complete all as specified and directed

Limit switch

Motor bearings

Compressor Bearings

Piston Kit

Drain out the fuel from the fuel tank of DG set of capacity up to 1000ltrs and keeping it in separate container safely, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank for cleaning, internally and externally by removing all the accumulated dirt/ sediment, leak testing the tank and welding/ brazing including one coat of synthetic enamel paint, refixing the tank in its original position, replacing the drain plug and PVC pipe, calibrating the fuel tank, refilling the drained out fuel back into the tank and marking of liters in gauge and provision of locking arrangements complete all as directed by Engr-in-charge.

Supply & fixing of 4 pole power contactor MCX-23,50Hz suitable for existing one and including taking down old unserviceable one complete all as direrected by Engr-in-Charge. Make: L&T/Schneider/Siemens

Supply & fixing of 4 pole power contactor MCX-33,50Hz suitable for existing one and including taking down old unserviceable one complete all as direrected by Engr-in-Charge. Make: L&T/Schneider/Siemens Note for item No.03,20 &21: These shall be executed immediately where ever required

Design, fabrication, supply and errecting connecting and testing totally enclosed LT Cubical panel board of size not less than 1400x1100x700mm, 3 Phase 4 wire system Outdoor type 3.15mm ,double door front and back openeing type sloped canopy(Hood) on top extended 100mm all-around, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 400 Sqmm 3.5 Core in and out(Quantity of konck out type plates shall be double for incoming & out going cable entries, panel board shall have sufficent space to accommodate spare cables also) , incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out of 3.15mm thik CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structral RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:3:6 type C1, 45cm below ground level and 15cm above ground level including taking down old unserviceable at MH and consisting the following provisions:-

(a) MCCB 630Amps Four Pole AC 415 Volts,50Hz,50kA , Adjustable Thermal & Magnetic settings,Cat No CM94104OOT1OG Make: L&T or its equivalent in Schnieder/Siemens/legrand - 01 No(incoming) (b) MCCB 400Amps Four Pole AC 415 Volts ,50Hz,50kA, Adjustable Thermal & Magnetic settings, Cat No .CM94104OOS1OGMake: L&T or its equivalent in Schnieder/Siemens/legrand - 02 No(Outgoing + Spare) (c) MCCB Three Pole 250 Amps 50Hz 415 Volts,Adjustable thermal Magnetic realse with rupturing capacity36 KA-03Nos(outgoings) Make : L&T Cat No CM98401OOQOOG or its equivalent in Schnieder/Siemens/legrand

Design, fabrication, supply and errecting connecting and testing totally enclosed LT Cubical panel board of size not less than 1400x1100x700mm, 3 Phase 4 wire system Outdoor type 3.15mm ,double door front and back openeing type sloped canopy(Hood) on top extended 100mm all-around, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 400 Sqmm 3.5 Core in and out(Quantity of konck out type plates shall be double for incoming & out going cable entries, panel board shall have sufficent space to accommodate spare cables also) , incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out of 3.15mm thik CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structral RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on angle iron frame of 50x50x6mm thick duly painted and embeded in PCC 1:3:6 type C1, 45cm below ground level and 15cm above ground level including taking down old unserviceable at MH and consisting the following provisions:-

(a) MCCB 800Amps Four Pole AC 415 Volts,50Hz,50kA , Adjustable Thermal & Magnetic settings,Cat No IHLCHF0800 # Make:Havells - 01 No(incoming) or its equivalent in Schnieder/Siemens/legrand/L&T (b) MCCB 630Amps Four Pole AC 415 Volts ,50Hz,50kA, Adjustable Thermal & Magnetic settings, Cat No .CM94104OOT1OG Make: L&T - 01 No(Outgoing) or its equivalent in Schnieder/Siemens/legrand (c) MCCB 400Amps Three Pole AC 415 Volts ,50Hz,50kA, Adjustable Thermal & Magnetic settings, Cat No CM94004OOS1OG Make: L&T - 01 No(Outgoing) or its equivalent in Schnieder/Siemens/legrand (d) MCCB Three Pole 100 Amps 50Hz 415 Volts,Adjustable thermal Magnetic realse with rupturing capacity25 KA-01Nos(outgoings) Make : L&T Cat No CM92008OOL1OG or its equivalent in Schnieder/Siemens/legrand

M & L earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth strip 32 x 6mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe medium grade 40mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion all as directed. Note:- Item of earthing includes cost of 7.5m long galvanised iron earth strip of 32 x 6mm size and protection pipe of 40mm bore GI medium grade.

Restreching/Restringing, tightening and repair to overhead line ACSR conductor of any size on LT poles including necessary Aluminium binding wire connectors PVC sleeves for jumper, fixing of insulators and prunning of tree complete all as specified and directed. Notes: (i) The distance between pole to pole in RM (contains 2/4/6 runs) i.e one span will only be considered for payment purpose. (ii) Extra aluminium conductor required for jumpers and binding purpose is deemed to be included in the quoted unit rate. iii) Trimming of tree branches upto 1.50 Mtrs distance around conductor is included in the unit rate quoted.

S&F twin core 6 Sqmm service wire 1100V grade heavy duty with PVC insulated aluminium stranded conductor served with inner sheatning of PVC tape and PVC sheathed including taking down old unserviceable complete all as directed . Make - Finolex/Havells/Standard /Finecab.

S&F twin core 10 Sqmm service wire 1100V grade heavy duty with PVC insulated aluminium stranded conductor served with inner sheatning of PVC tape and PVC sheathed including taking down old unserviceable complete all as directed. Make - Finolex/Havells/Standard /Finecab.

Renewal of PVC Junction box of size 11'x8'x4',light weight pole mounting including MCB SP 10Amps -1 No including necessary clamp MCB mounting and mounting of Box on pole with MS flat frame arrangement and necessary connector for looping in and looping out cable connection and suitable glands complete all as directed by Engr-in-charge.

M&L for spray painting of LT panels/feeder pillar boxes/other panel boards indoor/outdoor plinth mounted/wall mounted at site and applying two coat of synthetic enameled Smoke grey paint after removing all dust & rust and paint shall confirm to IS 2032 including marking of panel board with stencil letter with black or white paint and Font and Size of letter shall be directed by Engr-in-Charg e, complete all as specified and directed. Note: For ourtdoor panels board, plinth shall be white washed is deemed to be include in the quoted rate.

Srinivasa Consructions

bethelenterprises