GE (N) P/TOKEN- 124 OF 2023-2024REPAIRS/REPLACEMENT OF OLD CONVENTIONAL UNSV PT SWITCH SOCKETS WITH MODULAR SWITCH SOCKETS IN JCO OR QUARTERS AND ALLIED AOR IN THE AREA OF AGE EM (N) UNDER GE (N) PUNE

Amount

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material for taking credit and making good the disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down the old unserviceable sunken boxes complete (switch sockets with hylem sheet) of any type/ description complete all as directed.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, sockets, regulators, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(f) point wiring for One light point controlled by two 2 way switch.

All as per item No 4 above but with multistranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, sockets, regulators including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per Item No. 6 above but with multistranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly.

Supply and fix for metal flush box made of GI sheet with earth terminal including necessary cutting in wall and POP work as required for matching existing slot in wall complete all as specified and as directed for the following modual metal flush box

(a) Metal Flush box 1 Module

(b) Metal Flush box 3 Module

(c) Metal Flush box 4 Module

(d) Metal Flush box 6 Module

(e) Metal Flush box 8 Module

(f) Metal Flush box 12 Module

(g) Metal Flush box 2 Module

Supply and fix for modular plates white colour with frame of following module complete all as specified and as directed.

(a) 1 Module

(b) 3 Module

(c) 4 Module

(d) 6 Module

(e) 8 Module

(f) 12 Module

(g) 2 Module

S&F for readymade surface mounted PVC box with modular cover plate and frame all ISI marked suitable for holding modular switch socket & regulators for the following module:-

(a) 1 module

(b) 3 Module

(c) 6 Module

(d) 8 Module

(e) 12 Module

M&L for prepration of surface and applying two coats of acylic distemper of existing colour over a coat of primer all as specified and as directed.

M & L for Preparation of old/New treated plastered surface of wall (near metal flush box) by applying white birla/JK wall putty to get smoothen surface by sand paper rubbing and make good the surface as per existing complete all as specified and as directed.

S & F for Modular Switch piano flush type, single pole, one way, and 6 Amp complete all as specified.

S & F for Modular Switch piano flush type, single pole, two way, and 6 Amp complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15 Amp complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watts 1 module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for Bell push modular 6 Amps complete all as specified.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for for Lamp holder, PVC body of brass suitable for batten fitting completes all as specified.

S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated cable with multistranded FRLS copper conductor of size 4 Sq. mm nominal area and drawing through and including 20mm dia heavy duty non metallic rigid PVC conduit of white/ ivory colour and conduit accessories, ISI marked including one run of PVC insulated 2.5 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire from DB to main board complete all as specified and as directed. (Note- Two runs of 4 Sqmm main cable, one run of 2.5 Sqmm earth conductor and one run of Heavy duty PVC conduit will be measured as one unit)

S & F in repair for wall/ceiling mounted LED 20 watts with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X020XN or its equvalent in Philips, Halonix, Havells, Bajaj.

S & F in repair for wall/ceiling mounted LED 10 watts, box type light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X010XN or its equvalent in Philips, Halonix, Havells, Bajaj.

S & F in repair for recess mounted 2' x 2' luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free sift illumination square LED panel 36 watts, white powder coated CRCA housing with full window acrylic diffuser giving a complete full glow look, operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- JAQUAR Ultima Ultra Cat Part No LULTU1S036XC or its equivalent in Havells/ Halonix

S & F in repair for recess mounted square LED panel 18 watts, IP 20, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- Halonix HLFPR11-02-18-CW, Jaquar LNEP01S024XN, Phillips SM200C LED115 6500 PSU OD WH/shakti/ Halonix

S & F in repair for LED downlight surface mounted luminare round type 12 watts with inbult driver and polycarbonate opal diffuser white finish operating voltage 230V AC, 50 Hz including taking down old unserviceable fitting complete all as directed Make :- Jaquar LNVE02R012SN , philips/ Havells

S & F in repair for recess mounted 1' x 4' rectangular LED panel 36 watts, sleek design , polycarbibate diffuser operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- BAJAJ , HAVELLS

Supply and fix in repair for energy saving new generation 10 watts LED bulk head fitting , 230 volts with connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor from ceiling rose to fitting complete all as specified and as directed. Make :- PHILIPS/JAQUAR Cat No.CWLL01V109XX 10W/Halonix/ Shakti/Bajaj/ Halonix

S/F in repair LED street light fitting 45 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make JAQUAR /Bajaj, Philips,Havells as approved.

Supply and fix in repair of 17 W Integrated all-in-one solar street light with 3000 lumens & lithium ferro phosphate battery, solar panel and charger built into the luminaire. Pressure die cast aluminium for sturdiness and long life. Specially designed pole mounting bracket allows different tilt angles, lateral and pole top mounting. SunStay with system efficacy of more than 175 lm/W. as per specs with L shape Clamp including removal of old unserviceable one any type fiitings complete all as specified and directed.Make Bajaj/Philips

Supply and fix in repair GI pipe , medium grade of 80 mm Dia, with all fittings (all ISI marked) fixed as poles /on walls with required size flat iron clamp bolts, nuts and washers complete all as specified and as directed.

Supply and fix in repair for casing and capping heavy duty, size 20mm with all fittings complete all as specified and as directed

Supply and fix in repair for rigit PVC conduit 20mm dia. heavy duty of white/ ivory colour with all accessories and making good the disturbed seurfaces for laying of telephone cable complete all as directed

Supply and fix in repair for single core cable PVC insulated and unsheathed multistranded copper conductor of following size from point wiring/Submain wiring complete all as specified and directed.

(a) 1.5 Sq mm

(b) 2.5 Sq mm

(c) 4.0 Sq mm

Material and labour for preparation of old painted surfaces by scraping and removing old paints, rust, etc. from LT panel and applying one coat of red oxide zinc chrome primer, outer surfaces to be sprey painted with two coats of synthatic enamel cream colour paint complete all as specified and as directed.

Supply and fix in repair MCB Protected SRCD box 4 module 25 Amps with surface mounted PVC enclosure SRCD(socket residual current device) single pole with a three pin socket & top complete with 25 Amps MCB single pole. Make: Havells Cat part No DHDTCSN0251020 OR Equivalent C&S/Indo Asian/L&T/Bajaj/Legrand

Supply and fix in repair for sheet metal enclosures single pole and neutral with a three pin earth plug and socket complete with one MCB SP 20/ 32Amps complete all as specified and as directed. Make: Havells,C&S/Indo Asian/L&T/ABB/Legrand

Supply,installation,testing and commissioning of ceiling mount auto light occupancy, dual technology sensor,adjustable of delay timer, infra red and ultrasonic detection,Dia 8meters IP 20, 3 wire with neutral optimum distance between 2 sensors should be 6 Mtr, stand by consumption 0.8W, fixed directly to a false ceiling with mounting claws (included) or installed in a battibox depth 50 mm all as specified and directed. Note:- All necessary FRLSH copper wires to connect complete lights of office bldg/OR living/Messes etc are deemed to be included in the rates quoted above for motion sensors. Make : Legrand , Siemens, Schneider.

Supply and fix in repair for Ceiling Fan of sweep size 1200 mm BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. Make:- Bajaj , USHA , Havells, Orient

Supply and fix in repair for Ceiling Fan of sweep size 1400 mm BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. Make:- Bajaj , USHA , Havells, Orient

Supply and fix in repair for wall mounted fan of size 400 mm sweep BEE. ISI marked and connecting up including complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- Bajaj MIDEA BW 2200, USHA , Havells V3.

Supply and install in repair for pedestial fan of size 400 mm sweep and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed. Make- Crompton Model High Flo, Bajaj Midea BP 2200, or its equivallent model in Havells, Usha.

Supply and fix in repair for plastic body exhaust fan, AC single phase, 240 volts of size 150 mm sweep with louvers with necessary connection and replacement of flexible copper cable from ceiling rose including taking down existing complete all as specified and as directed. Make Bajaj Cat No. Maxio 6" Ivory or equivalent of Make Automberg/ Havells/Usha

Supply and fix in repair for plastic body exhaust fan, AC single phase, 240 volts of size 200 mm sweep with louvers all as per Cat No. Maxma DX 8" of Make Bajaj or equivalent of Make Automberg/ Havells/Usha with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed.

Supply and fix in repair for plastic body exhaust fan, AC single phase, 240 volts of size 250 mm sweep with louvers all as per Cat No. Maxma DX 10" of Make Bajaj or equivalent of Automberg/ Havells/Usha with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed.

Supply and fix in repair for sheet metal enclosure TPN phase segregated DB, 4 way with 200 Amps rated bus bar 415 volts 50 Hz double door vertical type suitable for MCCB incommer IP 43 prtection all as per Cat No. DBPGL004DD of make L&T or in equaivalent of make Legrand/ C & S/ Schneider/ ABB as approved on wall/ floor and making good of distrubed surface to match with existing colour of wall and electrical connections complete all as specified and as directed.

Supply and fix in repair for sheet metal enclosure MCB DB TPN 415 volts, IP 43 of 4 way made of CRCA sheet steel, powder coated provided with insulated phase busbars, neutral barwith necessary electrical connection, double door with locking system including cement work for inserting the DBs for mounting in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.Make: L&T Cat Part No DBTPE004DD or in equavalent in Legrand, C & S,ABB, Schneider

S&F in repair for MCB DB SPN 08 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified.

Supply and fix for MCCB TPN 415 volts 25 KA suitable for fixing on DB of capacity 63 to 100 Amps with extended terminals complete all as specified and as directed.

S & F for MCB TPN rated capacity 63 Amps, 415 Volts breaking capacity 10 KA complete all as specified and as directed. L&T/Legrand/C & S/Schneider/ABB/Indo Asian/Havells

S & F for 'C' curve MCB single pole & neutral 240Volts 32/40 Amps.

S&F 'C' curve MCB SP 240 volt 6 to 30 Amp

M& L in repair for Plastic trunk ISI marked of size 150x50 mm with flexible cover of 130 mm width, internal angles (adj from 80 degree), external angles (adj from 60 degree), joints for 130 mm width cover, base joint and end cap complete including all fixing arrangement all as specified and as directed by Engr-In-Charge.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Suchit constructions

K.K.Enterprises

PURVA ELECTRICALS AND ENGINEERS

M/s Asrani and sons

Fine-Tech. Electricals