Drilling development and commissioning 01 nos. deep borewell at Area office under Rajmahal Area.

Amount

Item Description/ Heading

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered:0.0m to 50.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered:50.0 m to 100.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered:100.0 mm to 150.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered150.0 m to 200.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered:200.0 m to 250.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered:250.0 m to 300.0 m

labour for boring through any type soil for sinking tubewell 0.0 m to 50.0 m depth in with casing pipe to lowered: 300.0 m to 350.0 m

supplying and Installation of 200 mm PVC Cashing pipe.

Providing and fixing service line cable 6mm.

Providing and fixing G.I Pipe cap

Washing boring.

Supply and Lowering 50mm G.I Pipe

Supplying and Commissioning of 1H.P Submersible pump motor cable starter.

Providing and fixing main switch

Providing and fixing G.I bend 2"*2"

Providing and fixing G.I bend 4"*2"

Providing and fixing G.I Tee 4"*2"

Providing and fixing G.I Tee 4"*4"

Providing and fixing N.R.V Brass 2" dia.

Providing and fixing flange 50mm

Providing and fixing flange 100mm

Providing and fixing valve 100mm.

Providing and fixing G.I Socket 100mm.

Providing and fixing G.I Socket 50mm.

Providing and fixing Union socket 50mm

Providing and fixing G.I Pipe 100mm

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars

Brick flat soling single layer

Total impact of GST for the purpose of CTC

M/S P.P. CONSTRUCTION

M/S Sudam Thakur