PROVN OF ACCN OF MES COMLAINT CELL AT NEWLY CONSTRUCTED MAP ACCN BEHIND BUTCHERY AND PROVN OF CONSTRUCTION OF BOUNDARY WALL AT BASANTAR LINE UNDER AGE BR III UNDER GE WEST DELHI CANTT 10

Amount

Surface dressing n.exc 15cm deep in soft/loose soil and getting complete all as specified.

Excavation in trenches in soft/loose soil not exc 1.5m wide and not exc 1.5m deep complete all as specified.

Returning filling in, including spreading leveling, watering and well ramming in layers n. exc. 15 cm in soft/loose soil, complete all as specified and directed.

Earth filling under floors or in foundation including watering and consolidation well ramming including spreading and levelling n.exc 25cm thick complete all as specified and directed. Note : Earth to be filled shall be obtained from item No. 2.00 above.

Removing excavated material and disposed off from MoD land complete all as directed

M & L for Anti Termite treatment for Treating the bottom and sides of excavation at the rate of 5 liters of emulsion per square metre of surface area complete all as specified and as directed.

M & L for Anti Termite treatment for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified.

M & L for Anti Termite treatment for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M & L for Anti Termite treatment for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M & L for Anti Termite treatment for Treating the soil alongwith external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation/ filling mass concrete complete all as specified and as directed.

M&L for ready mix concrete (RMC) of design mix M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc and the like complete all as specified and directed.

M&L for RCC of design mix M-25 (using 20mm graded stone aggregate) as in columns and the like complete all as specified and directed.

M&L for ready mix concrete (RMC) of design mix M-25 (using 20mm graded stone aggregate) as in slabs supported on walls and beams in floors, roofs, roof beams, landings, balconies canopies,deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC of design mix M-25 (using 20mm graded stone aggregate) as in lintel, beams etc and the like complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to lenght, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and directed.

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to lenght, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as specified and directed.

All as per Srl item No. 17 here-in-before above but TMT bars 5mm and over upto and including 8mm as in stirrups, spacers and binders.

Use and waste form work to soffits of suspended slab such as roof beams/slabs, chhajja, floor slabs, cover slab, shelves, landing and similar work not exc. 200mm thickness finished rough (horizontal or sloping) as specified and directed.

Use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions and the like complete all as specifed and directed.

Use and waste form work to sides and soffits of floor or roof beams, beams, haunchings, girders, bressummers lintels, cantilevers shelves including sup-ports, overhangs, etc also splays between floors and beams etc, complete all as specified and directed.

Material and labour for brick work using well burnt bricks (old size) having compressive strength not less than 100 kg/sqcm straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for brick work using well burnt bricks (old size) having compressive strength not less than 100 kg/sqcm straight or curved on plan to any radius in half brick thick walls, built in Cement mortar 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering in CM ( 1:6 ) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for applying wall care putty of minimum thickness 1mm for finishing the surface even to true aligned surface and smooth using sand papers etc all as specified and directed.

M&L for applying two coats of oil bound distemper (approved quality & tint) using painting rollers over a coat of alkali resistant primer on walls on prepared surfaces under items here-in-before complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling and finished fair & even without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surface complete all as specified and directed.

M&L rendering 15 mm thick plaster in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even & fair complete all as specified and directed.

M&L for applying two coat of cement base paint on prepared new plastered surfaces, of approved colour and tint over a coat of alkali resistant primer complete all as specified and directed.

M & L for 75mm thick Plain Cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate as in sub base all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over 15mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab in skirting 18-20mm thick over 10mm thick cement screed bed in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F mild steel framed work as in door or gates of angle or other sections, guard bars, cooler stands, with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforming to Fe 290 Gde E-165.

S & F factory made 35mm thick Flush shutters, solid core construction, with BWP plywood board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F 19mm thick flush shutters, plywood core construction, with BWP plywood board core and plywood face panels, commercial type on both sides as shutter of cupboard complete all as specified & directed.

S&F fibre glass reinforced plastic (FRP) door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame mould with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per sample kept on GE's office complete all as specified & directed.

S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per sample kept on GE's office complete all as specified & directed.

S&F powder coated aluminium frame for doors, windows, ventilators or framing of workstation etc with one or more rebates, section weight not less than 0.55 Kg/RM including joining cleat for fixing etc complete all as specified Note : (1) Only aluminium items to be measured. (2) Glass, wiremesh, handles to be measured & paid separately. (3) Minimum thickness of powder coating to be 50 micron.

S&F aluminium powder coated sliding window comprising of sliding runner of two way aluminium frame section (weight not less than 0.80 Kg/RM) as per series-A, consisting of two sliding shutters made out of section (weight not less than 0.55 Kg/RM) with and including 4mm thick glass fixed with rubber and aluminium beading including down push type locking arrangement in glass shutter, fixed the frame with rawl plug complete all as specified and directed.

M & L for RCC M25, design mix, using 20mm graded stone aggregate as in kitchen slab, shelf passage roof etc and including form work, providing smooth finish in bottom of kitchen slab, complete all as specified & directed.

S&F PVC butt hinges 100mm size and fixed to chowkhat complete all as specified & directed.

S&F PVC barrel tower bolt, extruded section 150mm size complete all as specified & directed.

S&F PVC Handles cast type for 125mm size complete all as specified & directed.

S&F butt hinges 100mm size, medium weight stainless steel and fixed by with screws to angle iron /steel chowkhat complete all as specified & directed.

S&F power coated aluminium anodised barrel tower bolt, extruded section 200mm size complete all as specified & directed.

S&F power coated aluminium anodised Handles cast type for 150mm size complete all as specified & directed.

S&F 250mm power coated aluminium anodised, sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as spd & directed.

M&L for preparation of new or previously untreated wood or wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint (approved tint) over a coat of pink primer complete as specified and directed.

M&L for preparation of new steel surfaces of steel and iron work of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for granite work 18 to 20mm (table rubbed and polished) in window-cills, cooking platforms, and like in single piece laid over & including bldding layer 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, polishing & half rounding of edges, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 for coping, hold fast blocks and similar work including form work to edges of concrete all as aspecified and directed.

M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling in (1:1) comprising one part of bitumen 85/25 graded and three parts of sand by weight all as directed at site.

S&F 75mm size stainless steel handle, bow shaped as per sample for cupboards complete all as specified and directed.

S&F 75mm thick heavy duty stainless steel butt hinges for cup boards complete all as specified and directed.

M&L for Glazed ceramic colour tiles in vertical surface of size 300 x450x 7 mm or 300x 600x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10mm thick cement plaster in CM 1:4 screed bed complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick (square) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of mortar in CM 1:6, all as specified and directed.

M & L for Vitrified tiles (light shade) 9 mm to 10mm thick (square) polished of size 600mmx600mm, in floors etc set & jointed in neat cement slurry and pointed in coloured cement to match over end including 15mm thick CM (1:4) screed bed or backing coat all as specified.

All as per item no 58 here-in-before but in skirting/ dado all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors including cutting chases for inserting GI tubing in walls, floor etc and making good complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F vitreous china wash hand basin flat back of size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as specified and directed.

S&F viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush pipe), complete all as specified and directed.

S&F vitreous china white european type WC with 'P' or 'S' trap including connection to drain pipes, traps, PVC flush pipe (excusive flushing cistern) and PVC seat cover and fixing bolts etc complete all as spd & directed.

S & F chromium plated jet spray including connection pipe complete all as specified and directed.

S & F chromium plated soap dish (confirm to sample) comlete all as specified and directed.

S&F Vitreous China Urinal, full stall type (as approved by GE), white with grating and union for discharge pipe(excluding flushing cistern, flush pipe and waste pipe. comlete all as specified and directed.

S & F stainless steel sink without drainage board made of stainless steel of not less than 0.8mm thick for kitchen with plugs, washer of over all size 495mm x420mm and bowl size 410mm x 330mm x 160 mm, complete all as specified and directed.

S&F curtain rods of stainless steel 25mm dia with and including SS decorative finials and SS brackets suitable for SS curtain rod fixed on wall etc complete all as specified & directed. Note : - (a) Only length of SS curtain rod shall be measured and paid. (b) SS decorative finials and brackets shall be provided for each curtain rod and rate shall be included with SS curtain rod.

S&F 15 mm bore dia angle valve, cast copper alloy screwed down high pressure with capstan head with long shank & cup complete all as specified and directed.

S&F 15mm bore dia bib tap with capstan head, screwed down, screwed for iron pipe, fancy type, cast copper alloy, chromium plated with wall flange complete all as specified and directed.

S&F 15mm bore dia chromium plated pillar tap fancy type with fly nut capstan head screwed for 15mm dia pipe, complete all as specified and directed.

S&F 20mm bore dia of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.

S&F PVC low level white flushing cistern, valveless syphonic action type 10 ltr capacity with inlet, ball valve, float and handle including PVC flush pipe 32mm dia bend including making necessary connection to water supply pipe line and, complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with cover and GI tank nipple and fixed in position etc complete all as specified and directed.

S&F 100mm dia CI spun soil, waste and vent pipes in any length, with or without ears, with lead joints, fixed to walls complete all as specified and directed.

S&F 75mm CI spun soil, waste and vent pipe in any length with or without ears with lead joints fixed to walls, complete all as specified and directed.

S&F 100mm bore spun cast iron bends/Tee (any radius) diminishing pieces or tapers (larger bore to be measured) with oval access doors complete all as specified and directed.

S&F CI Cowl for 100mm bore of CI spun pipe complete all as specified and directed.

S&F 75mm dia CI floor trap with grating including jointing to waste pipe with cement joint, fixed complete all as specified & directed.

S&F 150x150mm SGSW Gully trap with outlet of 100mm dia and CI grating including jointing to waste pipe with cement joint, fixed complete all as specified & directed.

M&L for PCC padding 1:3:6 type C-2 (using 40 mm graded aggregate) of average thickness of 50 mm thick with WPC in two layers of 25 mm each with chicken wire mesh 0.90 mm dia and 12X12 mm aperture and at top of PCC padding cut false groove of size 600X600mm centre to centre both ways. The grooves shall be 6 mm wide and 10mm deep and filled with mastic bitumen 1:1 proportion complete all as specified and directed. Note : Rate of WPC shall be included in quoted rate and noting extra payable on this account

M&L for applying water proofing treatment as following:- (a) 10 mm thick plaster in CM 1: 3 finished even and smooth over concrete surface. (b) A coat of bitumen primer @ 0.40 Kg/Sqm on prepared surface of plaster (c) Applying App based polymeric membrane minimum weight 3.50 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric/wt not less than 150 gm/Sqm and seating joints by torched application bitumen.

M&L for 50mm thick fine sand layer spread uniformly over sub base complete all as specified.

M & L for laying of Machine pressed precast concrete inter- locking tiles/paver block 80mm thick M-40 Grade of any colour, shape and size/grade with grey cement and no pigment including filling the joints upto full depth with fine sand, complete all as specified and directed.

M & L for 100mm nominal size double wall corrugated HDPE pipes stiffnesss class SN 8 high density, polyethylene pipe resistent to chemicals, easy and light weighted, long living, low friction, flexible, sun resistant pipe and laid in trenches complete all as specified and directed.

All as per item 87 above here-in-before but 150mm bore pipe and including connection in existing manhole and making good.

M&L for PCC 1:4:8 Type D-2 in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in all as specified for 100 mm dia complete all as specified and directed.

M&L for PCC 1:4:8 Type D-2 in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in all as specified for 150 mm dia complete all as specified and directed.

M&L for PCC 1:3:6 Type C-1 (using 20mm graded stone agg) as in benching, bed plates, etc of manhole complete all as specified and directed.

S & F 75 mm thick SFRC manhole / Drain covers n. exc 0.90 Sqm each in round or rectangle shape, factory made complete all as specified and directed.

Dismantling fencing wire mesh any type including barbed wire complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade st. 240 complete all as specified and directed.

M & L for rolled sections as in framing for cladding, glazing and the like fixed with the angle, cleats and connecting plates Fe-410 Gde E-250 qtuality A complete all as specified and as directed.

M & L for welded steel wire baric complete to wood or steel memberes weight not less than 4.00 kg per sqm complete all as specified and as directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement; 4 coarse sand)(sand source - Badarpur only) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings incl nailing with 75 mm MS nails @ 450 mm both ways on wall surface complete all as specified and forming groove (area of each panel not exceeding 2 sqm each) of size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete including taking down old plaster as per specifications complete all as specified and as directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a) supplied and fitted to chowkhats complete all as specified and directed.

M&L for stainless steel wire cloth of grade 304 (exterior grade) 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed to door/ window frame complete all as specified & directed.

M&L for point wiring with 3 x1.5 sqmm (nominal area) FRLS PVC insulated unsheathed and copper conductor cable ( phase ,neutral and earth wire ) in existing concealed conduit /open PVC rigid conduits,earth wire connected to comman earth dolly with and including pressed steel sheet metal sunken box of suitable size for fixing switches/ sockets etc with cover plate 3 mm thick plastic laminated sheet for one light /fan /exhaust fan/ circulator fan/ bell /buzzer controlled by one way switch complete all as specified and directed :-

(a) One light/fan/Exhaust fan/bell point controlled by one switch.

(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No. 100 here in before but with 2x2.5 Sqmm and 1x 2.5 sqmm cable for earth connection for one 3 pin socket outlet 15 amps independent board complete all as specified and directed

S&F switch piano flush button type 5 amps single pole one way complete all as specified and directed.

S&F switch piano flush button type 15 amps single pole one way complete all as specified and directed.

S&F socket outlet multipurpose 2 in 1, 5 Amps complete all as specified and directed.

S&F socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.

S&F bell push, flush type, 5 Amps complete all as specified and directed.

S&F Bell, AC 230 Volts, single pole complete all as specified and directed.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings and including Retrofit with LED 7 Watts bulb complete all as specified and directed.

S & F 18 W LED 6500k decorative ultra slim linear led lighting fixture with extruded AI, heat sink , evironmently friendly , energy efficient ready to use pack complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F electronic fan regulator 0-5 steps 100 Watt hum free including 6A socket frame and including connections complete all as specified and directed..

S&F polycarbonate ceiling rose 3 pin flush type 6 A 250 V AC with ISI mark including ring for jumbo ceiling rose complete all as specified and directed.

Supply only 7 W LED Bulbs, high energy efficiency LED luminaire with lumen output of 800-900 lumens, base 22, to be fitted on existing holders with colour temperature 5500-6500K, power factor > 0.95, CRI > 70, Beam single > 240, IP Protection 20 or higher suitable to work on 90-300 volt AC, confirming technical specification / Data sheet Annexuire-3, complete all as specified and directed.

S&F single pole MCB 6 to 32 Amps 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 35 sqmm cable complete conforming to IS 8828 of 1996 including taking down old MCB's all as specified.

M&L Sheet metal enclosure for DBs when MCBs to be used single pole and neutral double door, 240 Volts,8 way,with 200A rated busbar complete all as specified and directed.

S&F submain concealed wiring alongwith earth wire with 2 runs of 6 Sqmm (Main Cable and neutral) and one run of 6 Sqmm as earth wire of multistranded unsheathed colour code FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of size 25 mm dia with all fittings and accessories all as specified and directed.

Supply and lay XLPE cable PVC insulated armoured and heavy duty PVC sheathed LT 1100 volts grade with aluminium conductor of size 4 core 16 sqmm complete all as specified and directed.

M&L for GI pipe light grade galvanized with all fitting laid in trenches/poles with a size of 40 mm all as specified and directed.

M&L for GI pipe light grade galvanized with all fitting laid in trenches/poles with a size of 80 mm all as specified and directed.

M&L for earthing complete with GI earth plate electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not 2.25 Mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 Mtrs below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using GI strip 32 x 6 mm by means of bolts, nuts, chuck nuts, and washers made of galvanized iron and protected by medium grade 50 mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC 1:2:4 B-1 ( including excavation and earth work, disposal of surplus soil two a distance not exc. 50 Mtrs) all as specified and shown on plate No 5 of SSR – Part I 1991.NOTE:-(a). PCC pit shall be provided at list 500 mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipe and fittings, junction, elbow etc shall be deemed to be included in the unit rate. (b). RCC pit cover shall be pre cast of RCC 1:2:4, type B-1, 80 mm thick reinforced with XPM weighing not less than 4 Kg/ Sq m in lieu of cast iron cover.

S & F MCCB 100 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.

S & F MCCB 63 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.

Supply and Fix in repair factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs all as specified. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F TPN MCB 63 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable complete conforming to IS 8828 of 1996 all as specified.

S&F SPN MCB 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity and terminal box suitable upto 63 sqmm cable complete conforming to IS 8828 of 1996 all as specified.

S&F Exhaust fan AC 230/240W of size 300 mm with louvers including cutting opening wall and fixing with rug bolt, nut connecting to the electric point with 3 runs of flexible twisted copper conductor cable of suitable size complete all as specified directed.

S&F Ceilling fan AC 230/240W of size 1200 mm with fixing with rug bolt, nut connecting to the electric point with 3 runs of flexible twisted copper conductor cable of suitable size complete all as specified directed.

Cutting of Existing water supply main any size upto 100 mm for Taking branch connection for taking branch connection of size 40 mm including insertion of Tee unegual all as required at site or directed .

Supply and fixing Bldg security light fitting 50W LED ENDURA HIGHBRITE light fitting, energy saving & environmental friendly & robust open type vertical highbay/medium LED luminarie with high power COB LED as light source, including complete fitting arrangements complete all as specified directed.

S and F Gate valve size of 40 mm dia including all fittings all as specified and directed.

S and F Flote valve size of 25 mm dia including all fittings all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 27540.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

ONKAR ENGINEERS CONTRACTORS

M/S Ayub Khan