Construction of Anti Terrorism squad office building with development works at Race course in Coimbatore City.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.3: Earth work excavation in all Soft Disintegrated Rock (including refilling) a. 0 to 2 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25mt. a. 0 to 2 mt.

1.8 :Earth work excavation in SDR for Open foundation (excluding refilling) b. 2 to 3 mt.

2.6: Supply and filling of 40 mm HBSJ

2.7: Supply and filling of 20 mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3: Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

52.1: G.I Pipe 20mm dia for Hot water line (Fully concealed in walls)

53.3 : C.I. Steps (5kg)

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 : Earthing Station IS3043 (Type I)

86 : Anti termite treatment

112 : S&F of Exhaust fan 300mm dia

ANNEXURE-I 2.1.1 : Supplying and filling with gravel (including tax collected by the Govt.)

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.3.1 : P.C.C. 1:8:16 using 20 mm broken brick jelly (using crushed stone sand)

3.8.1 : P.C.C. 1:3:6 using 20 mm broken metal (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

8.3.1.1 : Standardised concrete Mix M30 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and Basement

b.In Stilt / Ground Floor

c. In First Floor

d. In Second Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground Floor

b. In First Floor

14.1.1.II : Precast Cupboard slab 40mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation and Basement

15.1: Cuddappa slab 20 mm tk. a. In Ground floor

b. In First floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. For Vertical wall

21.5.1.1 : Supplying and fixing of following size solid core flush door shutter of thickness 35mm a)door Size 1000mm X 2400 mm (Single leaf)

b)door Size 900mm X 2400 mm (Single leaf)

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx 16 to 18mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) using plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Painting with two coat of Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Painting with two coat of Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1: Rain water harvesting using defunct borewell and providing perforated cover slab (M20) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1 :Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm (using crushed stone sand)

50.5.1 :Supplying. Fabricating and erection of M.S Scheme Name board

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5. :PVC(SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1 : Gully Trap using chamber burnt bricks of size 23 x 11.4 x 7.5 cm (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.(Modular Switch) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point (Modular Switch)

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point (Modular Switch)

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself (Modular Switch)

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places (Modular Switch)

71.2. : Supplying and fixing of 32Amps triple pole main switch with fuse and neutral link

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

90.1: Providing additional strutting to centering of plain surface.

98.3.1 : TW Single leaf panelled door shutter (with brass Fittings) a. 1000 x 2400mm.

344.2: S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.2: Supply & laying Double charged virtifed tile flooring with tiles size 600 x 600 x 8mm for flooring and other similar works in cement mortar 1:3 (one of cement and three of CS sand) 20mm thick including pointing.

379.4.2.2 : S&F of Granite slab flooring in CM 1:3 20mm thick including pointing (Synthetic gery) (using crushed stone sand)

448.2: Providing PVC Tee with end cap

ANNEXURE - II A1: Supplying, delivery and fixing of 83mm tk rubber moulded hydraulic pressed paver block including conveyance charges, laying of 83mm thick paver block and filling the gap between the paver blocks including cost of material and labour charges and machinery charges etc.,

A2: Providing Shahabad stone flooring, C.M 1:3, 20mm tk (using crushed stone sand)

A3:Providing one coat of Wallputty for new plastered surface

A4: Supplying and applying of two coat of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing.

A5:Providing painting the wall with texture finish paint including labour charges

A6:Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

A7:Supplying and fixing in position of UPVC window of casement type( open) for all sizes

A8: Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation propertieswith outer frame60mm x 55mm with an outer wall thicknessof 2.4mm.

A9:Supply & Fixing of Qute WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve.

A10: Hydraulic Door Closer of various sizes of approved quality using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment (with ISI Monogram)

A11: Supplying & fixing of Stainless steel Hand Rails for Staircase

A12: Supplying & fixing of Stainless steel Hand Rails for side wall for Staircase

A13: Supply and delivery of CP two way bib cock with health faucet

A14: Supplying and fixing of CP Stop cock including cost of all materials and all labour charges etc complete

A15: Supply and fixing of CP shower with shower arm

A16: Supply and fixing of CP Wall Mixture Tap 3 in 1 system with Hand Showers

A17: Supplying and fixing of CP Angle valve including cost of all materials and all labour charges etc complete

A18:Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement a. 600mm x 600mm

b.900mmX900mm

A19: Supplying and fixing of stainless steel sink of size 600X600X200mm

A20: Supply and fixing of 9 watt LED bulb

A21: Supply and fixing of 4' 18 watt LED Tube Light

A22: Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A23: :Supplying and fixing of 30W LED street light fittings etc.,

A24: Supply and fixing of 12 watts LED bulb

A25: Run of 4 Wires of 6 sqmm PVC armoured UG cable incl. labour charges

A26: Run of 4 Wires of 4 sqmm PVC insulated single core multi strand

A27: Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection -

A28: Supplying, Fixing and testing and commissioning of MCB in a sheet steel enclosure with earth connection on surface / recess including interconnection, painting etc. as required (The enclosure size shall be suitable for receiving the incoming and out going cable directly). a). Triple Pole & Neutral 6A to 40A,10KA

b) 10/20/32A DP 10 KA MCB

c) 63A TPN 10 KA MCB

A29: Supply and laying of following PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good a) 2 core of 10Sq.mm PVC armoured LTUG cable

b) 3.5 core of 70 sqmm PVC Armoured LTUG cable

c) 3.5 core of 25 sqmm PVC Armoured LTUG cable

A30:Supply and fixing of brass cable gland for following PVC armoured LTUG cable with earth connection a) Brass cable gland for 2 x 10 sq.mm.

b) Brass cable gland for 3.5 x 70 sq.mm.

c) Brass cable gland for 3.5 x 25 sq.mm.

A31: crimping lugs suitable for the following copper UG cables etc to complete. a) 2 x 10 sq.mm. cable crimping

b) 3.5 x 70 sq.mm. cable crimping

c) 3.5 x 25 sq.mm. cable crimping

A32: Supply and run of 2 of No.8 copper wire for earth connections -

A33: Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

A34: Supply and fixing of Aluminium TNPHC Emblem of 18" height including cost of all materials and all labour charges etc complete

A35: Supply and fixing of 9" Height Aluminium letters including cost of all materials and all labour charges etc complete

A36: Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets (10mm thick)

A37: Providing Cornice Work for Gyp Board False Ceiling including cost of all materials and all labour charges etc complete

A38: SUPPLY AND FIXING OF GALVANIUM SHEET 0.47MM THICK

A39: Supply and commissioning of 2T split AC split type AC 3 star rated superior variety/make consisting of outdoor condensing unit complete with compressor and air cooler condenser with fan motor and one indoor unit with evaporator blower etc., including initial charging of refrigerant gas and suitable for single/ three phase operation (with cardless remote control facilities).

A40: Supplying and installation of 5 kva capacity automatic voltage stabilizer (superior variety/make) with time delay relay arrangement and low and high voltage cost of face units etc., all complete and as directed by the departmental officers.

A41: Supplying and fixing of MS stand for fixing outdoor condensing unit in position etc., all complete and as directed by the departmental officers.

A42:Supplying and laying of 5/8" and 3/8" copper pipe (extra beyond 3 metres supplied with ac unit) in position etc., all complete and as directed by the departmental officers.

A43:Supply, installation, testing and commissioning of 40 KVA Diesel Generator set complete with all accessories like engine, alternator, batteries with leads control panel, base frame, antivibration mounts, residential silencer,400 litres fuel tank, intake & exhaust piping, fuel oil motor operated pump, other miscellaneous accessories for the total set including test trial run at load for 8 hrs at factory (inclusive of consumable oil etc) necessary control wiring for battery charger etc., annunciation etc. as per standared specifications with AMF Panel

A44: Supply and fixing of water drain pipe line (1” PVC Pipe)

A45: Providing and fixing 25mm x 6mm copper strip on surface or in recess for connections as required

A46: Supplying and fixing of Polyester curtain (Ordinary Blinds) the plysurface of approved color and shade with grooves and lines and in patterns on specified area as instructed by Architect / Client and including the cost of necessary hardware's, adhesives, melamine polishing, wastages etc all complete the works.

A47: Providing and assembling of Double Glazed Performance glass, heat Strengthened clear Glass (IGUs) of size and shape as required etc all complete the works.

A48: Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour .

A49: Drilling of Borewell anywhere inculding transportation from one place to another place in alluvial soil or sedimentary starts mud circulation method 150 mm dia of clay and sand or sand stone shale pebbles boulders etc., by first taking a pilot bore of 165 dia (6 " to 8") by direct or reverse rotary mud and circulations method using contractors rig, fuel, labour driling betonite mud and water required for drilling at the site shown and as directed by departmental officers (Cal1x drills are to be used) a) Drilling of borewell in upto 60m

A50: Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s up to 60m depth ending from ground level. i) From 0 m upto 60 m Depth ending from ground level

A51: Supply and delivery of 150mm ribbed screen pipes (6kg/cm2) as per IS 12818 /1992 of approved quality for borewells

A52: Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC Couplers with Cement paste etc., complete supply and packing the annular space with pebbles of size quality as approved by the departmental officers. (i) 150mm dia casing pipes assembly

A53: Supply and fixing of PVC 160mm dia top end cap of approved make 6.1mm thick with inner thread etc., all complete

A54: Supply and delivery of Nylon Rope for Bore-well including cost of materials and labour charges etc., complete as directed by the departmental officers.

A55: Supply and fixing of 150mm dia MS Clampset

A56: Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell for the following duty condition: lpm50x100m

A57: Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 without Panel Board of capacity 5HP duty condtion : lpm75x100m

A58: Labour charges for the erection of submersible pumpset in Borewell/open well a)upto 5HP

A59: Supply and delivery of direct onlineTHREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START confirming to IS13947, IEC60947-1 a) For 5HP

b) For 3HP

A60: Supplying and laying 3 core 4 sqmm FLAT COPPER CABLE with ISI mark including cost of all materials specials etc. all complete

A61: Supply and delivery of 40mm dia UPVC pipe in to the borewell

A62: Supply, laying, fixing and jointing the following UPVC pipes schedule-80 in below Ground level a) 50mm Dia UPVC pipe

b) 65mm Dia UPVC pipe

A63: Supply, laying, fixing and jointing the following UPVC pipes schedule-80 in Above Ground level a) 40mm Dia UPVC pipe

A64: Supply and laying of 25mm B class GI pipe for flat cable in Below ground level

A65: Supply and laying of 100mm B class GI pipe for flat cable in Below ground level

A66: Supplying and fixing of 25mm B class GI pipe in Above ground level

A67: Supplying and fixing of 50mm B class GI pipe in Above ground level

A68: Supplying and fixing of 65mm B class GI pipe in Above ground level

A69: Supply and delivery of following dia of G.I specials a) 65mm dia GM Non-Return valve

b)65mm dia GM Gate valve

A70: Supplyand delivery of RCC Hume pipe of 300mm dia

A71: Supply and fixing of SS Swan Neck Tap including cost of material, cost of labour charges for fixing etc., all complete

CP Construction and Infrastructure (BID ID -1473780)