ADDN/ ALTN/ IMPROVEMENT OF DRAINAGE SYSTEM FROM CAMERO

Amount

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed by Engr In Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar complete all as specified and directed by Engr In Charge.

Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for rendering CM (1:6) 15 mm thick on other than fair faces of brick work or concrete surfaces etc including finished even and smooth without using extra cement up to four storey height bldg complete all as specified and directed by Engr In Charge.

M&L for rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement using water proofing compound complete all as specified and directed by Engr In Charge. Note:- WPC shall be measured & paid seperately.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Glazed ceramic coloured tiles in vertical surface 300x450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick screed in cement 1 :4 and pointed in white or coloured cement to match the shade complete all as specified and as directed by Engineer-in-Charge.

S&F non skid coloured ceramic tiles area of each tiles exceeding 0.11sqm but not exceeding 0.18 Sqm area and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

S & F in repair framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; drain cover grating, framed balusters; walk ways; railings; cooler stand, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engr In Charge.

M & L for Reinforced cement concrete M-25 using 20mm graded stone aggregate as in chajjas or slab and the like complete all as specified and directed by Engr-In-Charge.

M & L for formwork to chullah hoods, chajjas, slab, trough and similar items including edges finished rough surfaces of concrete complete all as specified and directed by Engr-In-Charge.

S& F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia complete all as specified.

All as per item No 12 above but 6 to 8mm dia, as in stirrups, spacers and binders complete all as specified and directed by Engr In Charge.

Supply only liquid water proofing compound only complete all as specified and directed by Engr In Charge.

M&L for Chequered cement concrete coloured tiles (300 X300) 20-25mm thick confirming to IS -1237 (rubber moulded) in floor setc, set, jointed & pointed with cement slurry 15mm thick bedding layer of cement sand mortar (1:6) including demolition complete all as specified and directed by Engr In Charge.

M&L for 100mm thick plain cement concrete, type D-2, 1:4:8, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered surfaces of walls, and applying two coats of distemper oil emulsion over a coat of primer incl 3mm thick elastomeric wall care putty on walls complete and specified and as directed by engr-in -charge.

M&L for preparation on new or previously untreated wall surfaces and applying two coats of exterior emulsion paint over a coat of primer any tint (colour as approved by GE) over 3mm wall care putty including preparation of surface of wall up to four stories complete all as specified and dircted by Engineer in charge.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m depth; for fdn etc,or for shafts n.exc 10 sqm on plan in any type of soil/rock complete all as specified and directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-charge

Removing excavated materials n.exc 50M and depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and directed by Engr-in-charge

M&L for Salt-glazed stoneware drain pipes150mm bore laid in trenches and jointed all as specified

M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 (using 40mm graded agg) for 150mm bore pipe, all as specified.

M & L for cement Concrete 1:4:8 type D2 (using 40mm graded agg) as in foundation filling and mass concrete, complete

M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm greded crushed Aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone agg)as in manhole covers set in cement motar 1:6 all as specified and directed including necessary formwork and moulds all as specified.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced ) of any description and in any position not other wise specifically provided

M&L for PCC 1:2:4 type B-1(20mm graded aggregate),25mm thick as in sub base to the tile flooring complete all as specified.

Dismantling of interlocking paver block in any shape and size complete all as specified

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade all as specified and directed by Engr-In-Charge.

M&L for Welding in repairs not exceeding 2.5 cm in length thickness of metal to be welded exceeding 6 mm but not exceeding 9 mm. Note Rate including taking down steel window or door chowkhat , ventilator frame and welded with Angel iron /MS Flat as required length and refix the same and making good disturbed area all as specified and directed by Engr-in Charge

M&L for Welding in repairs of ventilator window or other opening up to 4 Sqm area including taking down steel window or door chowkhat , ventilator frame and welded with Angel iron /MS Flat with wire mesh complete as required length and refix the same and making good disturbed area all as specified and directed by Engr-in Charge

S&F glazed ceramic wall tiles in verticle surface 300 x 200 x 7mm thick set and & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in cement mortar 1:4 complete.

M&L for 5 mm thick cement plaster in cement mortar (1:3) as in ceiling, soffit of stair case, chhajjas facia etc including cement slurry etc complete all as specified and directed by Engr-in-charge.

Supply only integral water proofing compound only complete all as specified and directed by Engr In Charge.

M&L for preparation of newly plastered or unplastered surface/Old plastered surface and applying three coats of white wash on ceiling all as specified and directed by Engr-in-charge.

M&L for dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr In Charge.

M&L for framed work of Fe-410W (Gde E-250) quality B as in doors or gates of angle or other section with gusset plate, rails, braces etc, complete drilled for fixing of steel sheeting or other covering, door etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of stee, sheeting or other coverings, running rails and guides) and hanging: also fastening and fixing, complete all as specified and as directed by the Engr-in-Charge.

S&F Mild steel, 1.00mm thick plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate complete all as specified and directed by Engr In Charge.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for vitrified cermamic light shade tiles 9 to 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring (in any pattern) and jointed with neat cement slurry over 15mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

Ashish Sehgal and Co.

J D ENTERPRISES

Laxmi traders

Commercial Traders

Gaurav India Corporations

FUTURE ENGINEERING

shakti construction

JAIPAL AND BROTHERS