REPAIRS TO SUNKEN FLOORS PLASTERING FLOORING KITCHEN CABINETS CUPBOARDS AND JOINERY IN OFFR MD ACCN AT GORKHA HILL CIRCLE MAP AND DEFENCE CIVILIAN QTRS AREA UNDER AGE B R I AT GE DSSC WELLINGTON

Amount

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

M & L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note : Screed bed shall be measured and paid separately.

M & L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note : Screed bed shall be measured and paid separately.

M & L for glazed ceramic coloured tiles in vertical surface of size 600 x 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note : Plaster shall be measured and paid separately.

Material and labour for coloured light shade vitrified tiles 600 x 600 x 8 to 10 mm size as in flooring set and jointed in neat cement slurry and pointed in coloured cement to match, on flooring, skirting all as specified and as directed.

M & L for rendering 10mm thick in CM (1:4) on fair faces of brick/stone or concrete surfaces for backing of dado/skirting all as specified and as directed.

M & L for screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes all as specified and as directed.

Demolition of cement concrete (unreinforced ) of any description and in any position not otherwise specifically provided etc. exc 15cm thickness above ground floor and removing debris from site complete all as specified and as directed.

M & L for laying 20mm thick cement screed in CM (1:3) mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for roof slab/ floor complete all as specified and as directed. Note : Liquid water proofing compound shall be measured and paid separately.

M & L for cleaning the surface of sunken floor portion of WC, Bathroom etc., with wire brush, washing with hydrochloric acid to remove dust, dirt, oil, grease, loose particles etc., and providing water proofing treatment to sunken floor by applying first layer of slurry of cement @0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitious (PMC) composite compound @ 0.253 Kg/Sqm and second layer of slurry of cement 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126 Kg /Sqm etc., complete all as specified and as directed.

M&L for plain cement concrete type B1 1:2:4 (20mm graded agg) 40 mm thick as in sub base to floor all as specified and as directed.

M & L for plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed.

M & L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in copings in chejja apex stones etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M & L for providing 40mm (avg thick) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) mixed with WPC as per manufacturer's instruction as in padding concrete for roof treatment, floor/chajjas etc., finished even and fair all as specified and as directed. Note : WPC shall be measured and paid separately.

M & L for providing 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection/paving finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for granite of any type tile 20 mm thick machine cut bedded and jointed with grey cement slurry & pointed with white cement to match the shade of granite stone including grinding and polishing, with and including 10 mm thick backing coat in CM (1:3) complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing unserviceable debris off the premises all as specified and as directed.

Taking down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete.

Taking down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete.

Taking down steel tubing and connections, including cleaning for refixing or removal to store of 25 mm bore complete.

Refixing of old GI steel tubes and connections of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 15mm bore in short length all as specified and as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 20mm bore in short length all as specified and as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 25mm bore in short length all as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall

Dismantling water tanks Capacity of tank exc 250 & n. exc 500 ltrs removing to store

Dismantling water tanks Capacity of tank exc 500 & n. exc 1000 ltrs removing to store

Supply and fixing rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical, vertical with closed top) hoisted and fixed in position all as specified and as directed.

S&F 25mm bore, Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete as specified and as directed.

S&F 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F 40mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F in repairs Nipple suitable for HDPE water tank 20mm dia (Minimum weight 45gms)

S&F in repairs Nipple suitable for HDPE water tank 25mm dia (Minimum weight 65gms)

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), colour white, closed pattern with flat bottom and seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) and including taking down complete all as specified and as directed.

S&F in repairs, vitreous china water closet squatting pan orissa pattern, 580 x 450 mm size with integral foot rests, colour white and P-trap including connections to drain (or outgoing pipe), lime concrete bedding complete all as specified and as directed. Make : Johnson Model - Pearl Orissa Pan P0360PW OP23 or equivalent Prayag/ Parryware/Hindware as approved by GE.

S&F in repair PVC valveless, syphonic action type, 10 Ltr capacity, flushing cistern low/high level, white with inlet, ball valve, float and handle including brackets and connections and including taking down complete all as specified and as directed. Make : Johnson Ultima Single Flush - P2827PW or equivalent in indware/Cera /Parryware /Prayag as approved by GE.

S&F wash basins, vitreous china of size 550 x 400 including cutting for and pinning in ends of brackets or erecting stand, inclusive of fixing of supply and waste pipe 32 mm bore, bottle trap, 15 mm bore pillar tap, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed.

Supply and fix in repairs of Vitreous china Wash Hand Basin, White, counter top oval type of size 550x450x200mm as per Cat No.FLS-WHT-5701 of Jaquar (or) C0431 Cascade NXT of Parryware or Cat No.10017 of Hindware or equivalent of other specified makes, fixed over and including Jet black Granite slab of suitable size for WHB, of 18mm thick with open in centre fixed over brackets including 32mm waste coupling, 32mm dia waste pipe750mm long etc.,including taking down existing one complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include the cost of WHB, Granite slab, brackets, waste coupling and waste pipe

S/F in repairs low density polyethelene pipes (LDFE) of pr. Rating 6 Kgs/Sqm fixed complete to walls 40mm bore.

S/F in repairs seat cover for pedestal pan white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S/F in repairs bib taps cast copper alloy fancy type screwed for iron pipes 15mm chromiuim plated.

S&F in repairs Bib cock (Two in one) complete all as specified and as directed Make: Jaquar CON-041KN or Prayag Cat no-8312 or equivalent make as approved by GE.

S/F in repairs Pillar taps(long thread) cast copper alloy fancy type 15mm thick long thourght.

S&F in repairs 15mm bore stop cock, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs 15mm bore stop cock, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union with long shank and cup(concealed type) complete all as specified and as directed.

S & F in repairs Over Head Shower of size Make : Prayag Cat No BS-68 or equivalent approved make, with shower arm complete all as specified and as directed.

Supply and fix in repairs health faucet (hand shower) chromium plated with 1.0metre long easy flex tube 8mm dia with wall hook as per Cat No.ALD-565 of Jaquar or MAC-3050 of Marc or T9961A1 of Parryware or Cat No.BEA-41 of Prayag or equivalent of other specified makes, complete all as specified and as directed.

S&F in repair 15 mm dia bore angle cock chromium plated cast copper alloy fancy decorative type with flange plate including taking down complete all as specified and as directed

S & F in repair Sink mixer with regular spout Table mounted Make :- Prayag Cat No- 6550 or equivalent all as specified and directed by Engr-in-Charge

S & F in repair Sink mixer with regular wall mounted Make :- Prayag Cat No- 6555 or equivalent all as specified and directed by Engr-in-Charge

S & F in repairs Basin Mixer without popup waste system with 450 mm long braided houses Make : Prayag Cat No-6750 all as specified and as directed by Engr-in-Charge

S & F in repairs Wall mixer 3 in 1 system with provision for both hand shower complete with 115 mm long bend pipe, connection legs & wall glange (without hand & overhead shower) Make : Prayag Cat No- 6775 all as specified and as directed by Engr-in-Charge.

S & F in repair Stainless steel kitchen plate rack of size (24x36x10) Make :- Prayag Cat No- P-336 or equivalent all as specified and directed by Engr-in-Charge

S & F in repairs corner self with glass of size 300 x 300mm, 8mm thick beveled on edges with two brackets CP complete all as specified and as directed.Make-Prayag- BEA -46 or equivalent.

S & F in repair Full glass shelf 450 mm (18") Make :- Prayag Cat Part No- BEA -53 or equivalent all as specified and directed by Engr-in-Charge

S & F in PTMT extension nipple 15 mm (Minimum weight of 18 gms) all as specified and as directed.

S&F in repair stainless steel soap dish of size min 100 mm dia or square or rectangular complete all as specified and as directed.

S & F in repair to chromium plated Toilet paper holder of vitreous china fixed to wall all as specified and as directed.

S/F in repairs towel rack 600mm (Make Jaquaror equivalent). Jaquar cat no:1181

S/F in repairs Towel rail 600mm all as specified

S & F in repair 450 mm x 600 mm looking mirror 5.5 mm thick glass, beveled edge finishing including studs and necessary fittings all as specified and as directed by Engr-in-Charge

S/F in repair waste coupling brass chromium plated for stainless steel sinks wash basins etc all as specified 32mm.

S/F in repair waste coupling brass chromium plated for stainless steel sinks wash basins etc all as specified 40mm.

S&F in repairs PVC flexible waste pipe 32 mm dia.

S&F in repairs PVC flexible waste pipe 40mm dia.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm

S/F In repairs PVC floor multi trap with grating including jointing with solvent cement 75 mm outlet.

S/F In repairs for removal of old PVC/cast iron floor trap incl wall crossing pipe and fixed with new outlet 75mm pvc (swr) floor trap/ multi trap with stainless steel grating and new wall crossing and filling with pcc 1:2:4 with water proofing compound including matching with existed tile and joining with outer pipe line with solvent all as specified and directed by Engg in Charge.

S/F In repairs PTMT Grating 100 mm dia outlet.

S/F In repairs PTMT Grating 125 mm dia with waste hole outlet all as specified and directed

Taking down ci pipe jointed in cement mortar taking out of wall in upto100 mm dia all as specified and as directed.

Taking down eaves gutters & rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the center line over fittings & accessories).

S/F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling

S/F(SWR) PVC pipe 75 mm single socketed in any length with ring joints to walls/ceiling all as specified and directed

S/F PVC (SWR) bends 110 mm bore with access door all as specified and directed

S/FPVC (SWR) single Y 110 mm bore with access door all as specified and directed

S/FPVC (SWR) double Y 110 mm bore with access door all as specified and directed

S/FPVC (SWR) single Y 75 mm bore

S/F PVC (SWR) bends 75 mm bore with access door

S/FPVC (SWR) double Y 75 mm bore with access door

S/F (SWR) T Single socket equal or unequal (Junction Single) 75 mm with access door

S/F (SWR) T Single socket equal or unequal (Junction Single) 110 mm

S/F PVC(SWR) Vent cover 110 mm

S/F PVC(SWR) Vent cover 75 mm

S/F PVC(SWR) reducer

S/F PVC(SWR) Vent cover 75 mm

Demolition of brick work / pre cast concrete article / stone masonry built in cement mortar all as specified and as directed.

M&L for Precast cement concrete solid building blocks or slabs Type C1(1:3:6) using 20 mm graded aggregate, exc 10 cm thick set in CM 1:6 all as specified and as directed.

M&L for Precast cement concrete solid building blocks or slabs Type C1 (1:3:6) using 20 mm graded aggregate, 10 cm thick set in CM 1:6 all as specified and as directed.

TMTbars,10mm dia and over cut to length, bent to shape required,including cranking, bending spirally for hooping for columns,hookingends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified.

M&L for fair finished flat surfaces of concrete formwork to soffits of suspended slab such as roof,floorslabs,landing and similar work not exceeding 200mm thick

M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams and columns in floors roofs,landing,balconies,canopies,deck slab and in shelves and like complete as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on PCC block masonry or fair faces of brick work surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on PCC Stone masonry surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for 20 mm thick rendering in cement mortar 1:4 on stone masonry surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid separately.

M&L for 15 mm thick rendering in cement mortar 1:4 on brick work surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for rendering to soffit of RCC slab& ceiling , etc. 5 mm thick in cement mortar 1:3 finished even & fair without using extra cement complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for preparing newly plastered surfaces on external walls and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti-algal weather proof paint complete all as per manufacturer instruction as directed.

M&L for preparation of new surfaces of plastered surfaces of walls and applying three coats of white wash.

M&L for preparation of new surfaces of plastered surfaces of wall and applying two coats of white wash on celling.

M&L for preparation of new surfaces of walls and applying with white putty and making the surface to an even &smooth finish, rubbing with sand paper of different grade etc and applying two coats of Oil bound distemper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved.

Dismantling of boarding, any description, fixed in any position with nails all as specified and directed

S&F 18/19mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and directed

S&F Continuous (Piano) hinges SS, bright finish width of flaps 40mm

Supply and fix in repairs Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

Supply and fix in repairs stainless steel telescopic ball bearing channel, zinc plated finish for drawer including necessary fittings up to length of 600mm fixed with screws complete all as specified and directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

S&F brass knobs 35-40mm dia complete all as specified and directed

S&F brass knobs 35-40mm dia in repairs complete all as specified and directed

S & F in repairs to 18 mm thick Engineers hard wood(American wall nut pattern) first class teak wood wooden flooring with inter locking system fixed backing with 12 mm thick plywood (BWP) adhesive/nailing over laying over Polyethylene foam on PCC floors and including necessary cutting / grinding to bring smooth finish complete all as specified and as directed.

S& F in repairs to 10mm thick laminated wooden flooring including foam with interlocking system including necessary cutting/grinding to bring smooth finish complete all as specified and as directed.

Taking down Chowkats or frames not exceeding 1.5 Sq.M each (Without taking off shutters from the frames). complete all as specified and directed

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each (Without taking off shutters from the frames) complete all as specified and directed

Taking down shutters of any description not exceeding 1 Sq. M each complete all as specified and directed

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq.M each complete all as specified and directed

S&F Second Class hard wood clean and sawn plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S & F MS work as in hold fast etc confirming (Fe-410-0 or Fe-310-0)

M&L for PCC (1:3:6) Type C1(using 20 mm graded stone aggregates) as in hols fast, PCC Bed blocks in finished all exposed surfaces of concrete including necessary form work complete all as specified and directed.

S&F Second class hard wood plain, framed, Paneled door Shutters 35 mm thick (any number of panels), with lock rail and panels 12mm veneered particle board with commercial veneered on both faces. The size of rail and stiles as per IS 1003 (Pt-I), kiln seasoned and chemically pressure treated etc complete all as specified.

S&F Second class Hard wood glazed and skeleton door, shutters, open rebated and prepared to received glass, gauge etc (without sash bar) edges of framing plain, charnfered or rounded and mitred, beads 8.23 (a) thickness 35mm and fitted to Chokets etc. complete.

S&F Solid PVC Door Frame of size 50mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be painted to match with prelam sheet complete as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm PVC Sheet on back face with wood free EPS complete as specified and as directed. Make : Sintex or equivalent in Rajashri plastwood/Poly windows/Dura plast extruction as approved by GE.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading in repairs.

S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square but not exceeding 0.5 Sqm in each pane all as specified and as directed

S&F 100mm size Stainless steel butt hinges, fixed with stainless steel hinge pin complete as specified and as directed.

S&F 150 mm long, PVC Bow handle complete as specified and as directed.

S&F 100mm long, PVC tower bolt complete as specified and as directed.

S &F MS Butt hinges medium weight cold rolled & fixed 100mm long

S &F MS Butt hinges medium weight cold rolled & fixed 75mm long

S & F Aluminium anodized barrel tower bolts of extruded section 200mm

S & F Aluminium anodized barrel tower bolts of extruded section 100mm

S & F Aluminium anodized handles cast type 150mm long

S & F Aluminium anodized handles cast type 100mm long

S & F Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as specified and as directed.

M&L two coats of synthetic enamel paint over a coat of pink primer to new wooden surface including preparation of new surface.

S &F in repairs MS Butt hinges medium weight cold rolled & fixed 100mm long

S &F in repairs MS Butt hinges medium weight cold rolled & fixed 75mm long

S & F in repairs Aluminium anodized barrel tower bolts of extruded section 200mm

S & F in repairs Aluminium anodized barrel tower bolts of extruded section 150mm

S & F in repairs Aluminium anodized barrel tower bolts of extruded section 100mm

S & F in repairs Aluminium anodized handles cast type 150mm long

S & F in repairs Aluminium anodized handles cast type 100mm long

S & F in repairs Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long.

S&F 300mm in repairs, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as specified and as directed.

S&F 75mm in repairs Hasp and staple type, alluminium anodised including bolt to hinge plate and fxed with screws in repairs complete as specified and as directed.

S&F 150mm, Double action spring hinges, mild steel with steel wire spring, stove enameled, black in repairs complete as specified and as directed.

S&F in repairs 150 mm floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring ,fixed in floor.

S&F 20 mm bore dia aluminium anodised tubular towel rail, curtain rod etc.

S&F Harrison rails mild steel, chromium plated with fixing brackets in repairs all as specified and directed be Engg in charge

S & F in repairs Galvanized mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples taking down existing wire cloth complete all as specified and directed

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading in repairs.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or beads all as specified

S & F in repairs 4mm thick sheet glass, ordinary quality and glazing with oil putty in square but not exceeding 0.5 Sqm in each pane all as specified and as directed

S & F 4mm in repairs thick pin headed figured glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane all as specified and as directed

Removal of bushes , shrubs and vegetation by top of the roof and surface of bldg all as specified and directed by Engr-in-Charge

Dismantling of Wrought iron (or) mild steel work , including barbed wires, bolts, 10mm dia rods etc..,

S/F Joist, channel, angle to tee sections, fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250) quality-A.

M&L for two coats of synthetic enamel paint over a coat of red oxide, zinc chrome new or previously untreated steel surfaces of any description, over 10 cm in width or girth,not other wise described.

Repair to existing steel rolling shutters by complete removal and refixing without ball bearing, spring as specified including top cover, anchoring rod, hasp and staple; erected in position as indicated/, complete: push pull or manual type and rewelding, rops, stoppers, oiling, greasing, easying etc including necessary replacement of profile, if required grid channel complete all as specified and as directed by Engr-in-Charge (Note: Spare parts required shall be measured and paid seprately)

Supply only of ball bearing for rolling shutter with necessary replacement of profile complete all as specified and as directed by Engr-in-Charge

Supply only of spring for rolling shutter with necessary replacement of profile complete all as specified and as directed by Engr-in-Charge

M &L for Welding in repairs n. exc 2.5cm in length N exc 6mm all as specified and directed by Engr-in-Charge

S & F in repairs, stainless steel 1 mm thick kitchen sink & draining board high grade stainless steel 304 (18/8) 18% chrome & 18% Nickel Rust proof with plug washer and waste coupling & waste pipe, including bedding in cement mortar to dwarf wall or on brackets and connecting union pipe, fixed on including taking down vitreous china sink complete all as specified and as directed.Make--Prayag OR equivalent

GUNASEKARAN AND CO

P K ENTERPRISES

PM CONSTRUCTION