Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical AT RASIKA PO RAJALOKA DIST MAYURBHANJ PIN 757088 | MAYURBHANJ | ODISHA | 757088 | Admitted-Fee/PreQual/Technical |
Tender Value
₹44.1 L
EMD Value
₹44,052
Closing Date
6 Dec 2025, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Divisional Officer
ROADS AND BUILDINGS DIVISION, RAIRANGPUR
Construction of One No E type Qr for Assistant Engineer, Jashipur (R and B) Section in the District of Mayurbhanj for the year 2025-26 (Ltr no.39609 dt.17.10.2025) (Building Work)
2025_EICCL_122278_1
37
Open Tender
Civil Works - Buildings
Percentage
120 days
Rairangpur
2 documents required · 2 mandatory
₹6,000
₹44,052
Yes
22 Dec 2025
29 Nov 2025
8 Dec 2025
29 Nov 2025
6 Dec 2025
29 Nov 2025
29 Nov 2025 - 6 Dec 2025
Dismantling GCI or AC sheet roofing after careful removal of nuts and bolts including stacking the useful materials for reuse and removing the debris within 50m lead.
Dismantling wrought and framed timber in roof after careful removal of nails,bolts etc. stacking the useful materials for reuse and removing the debris within 50 m lead
Dismantling and removing doors, windows & ventilators including removal of frame,hinges,fastenings and stacking the useful materials for reuse and including refixing the same after necessary repair removing the debris within 50m lead
Dismantling Brick or stone masonry in clay under 3m height including stacking the useful materials for reuse and removing the debris within 50 m lead etc complete
Carriage of debries and bulkey materials within 5 K.M. lead loarding and unloarding etc.complete
Earth Work in excavation of foundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect for the work as directed by the Engineer-in-charge.
Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect and as per direction of Engineer-in-Charge.
Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete.
R.C.C.M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. RCC work of M-25 grade concrete in Column Base Footing
RCC work of M-25 grade concrete in Column Super Structure Ground Floor
Head room
RCC work of M-25 grade concrete in Plinth Band
RCC work of M-25 grade concrete in Lintel Band Ground Floor
RCC work of M-25 grade concrete in floor Beam Ground Floor
RCC work of M-25 grade concrete in Roof Beam Head room
RCC work of M-25 grade concrete in Chajja Ground Floor
Head room
RCC work of M-25 grade concrete in Staircase Ground Floor
RCC work of M-25 grade concrete in Roof Slab Ground Floor
Head room
Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment) Ground Floor
Head room
Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of 25cm x 12cm x 8cm size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. in Foundation and Plinth
in Super Structure
Head room
At Outer side 12 mm (1/2") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. Ground Floor
Head room
In Inner Side 16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. Ground Floor
Head room
6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-Charge. Head room
Supplying, fitting and fixing vetrified tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. Ground Floor
Supplying, fitting and fixing Granaite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C. Ground Floor
Fixing tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. Ground Floor
Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. Ground Floor
Head room
Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete. Ground Floor
Head room Outside
Head room Inside
Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. Ground Floor
Head room
Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. Ground Floor
Head room
Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect.
Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams.
Supplying and fixing W.I. clamps 33cm to 38Cm long of 35mm × 5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12mm, to 20mm hard stone chips or in cement mortar (1:3) including cost of all Doors
Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. Ground Floor Door
Grill
Head room Door
Grill
Providing and fixing ISI marked 35 mm thick flush door shutters confonning to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete SR-2022, Page 234, Sl No-8 Ground Floor
Supplying, fitting, fixing of two track UPVC Sliding window track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with 6mm thick glass of approved quality complete with frame. Sutters and all fitting and fixtures. Head room
Priming one coat with any approved primmer (To Receive Enamel paint) including cost of primmer & labour to give an even shade excluding cost of primer. (As per A.R. 93/1) Ground Floor
Head room
Painting Two coat with any approved S/E paint over a coat of primer to wood / iron works including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. Ground Floor
Head room
25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete. Ground Floor
Head room
Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour, conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge. Ground floor
E.I Recessed wiring to Modular light point/Fan p
INR Six Thousand Eight Hundred Twenty Only
INR Fourteen Thousands Seven Hundred Only
INR Thirty Three Thousands Nine Hundred Fifty Only
INR Fourteen Thousands Five Hundred Fifty Only
INR One Thousand Eight Hundred Thirty Only
INR Two Thousand Seven Hundred Thirty Six Only
INR Five Thousand Nine Hundred Only
INR Five Hundred Ten Only
INR Ten Thousands Four Hundred Fifty Two Only
INR Two Hundred Twenty Only
INR Thirty Three Thousands Eighty Five Only
INR Two Thousand Eight Hundred Sixteen Only
INR Three Thousand One Hundred Thirty Eight Only
INR Three Thousand One Hundred Forty Four Only
INR One Thousand Four Hundred Sixty Four Only
INR Five Hundred Thirteen Only
INR Five Thousand One Hundred Eighty One Only
INR Six Hundred Eighty Nine Only
INR One Thousand Six Hundred Twenty Six Only
INR Two Thousand One Hundred Eighty Seven Only
INR One Thousand Six Hundred Ninety Six Only
INR Five Thousand Four Hundred Seventy Two Only
INR Four Thousand Fifty Six Only
INR Thirty Six Thousands Eight Hundred Only
INR Thirty Six Thousands Five Hundred Three Only
INR Sixteen Thousands Two Hundred Thirty Five Only
INR Five Thousand Two Hundred Fifty Four Only
INR Eighteen Thousands Five Hundred Fifty Only
INR Fifty One Thousands Five Hundred Only
INR One Thousand Seven Hundred Sixty Seven Only
15mm dia Two way Bib Cock (Jaquar)-CON-CHR-041KN
l materials ,labour ,T&P and fixing wash kitchen sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste , fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc. including cutting holes in walls and making good the damages etc.all complete as per specification and direction of Engineer-in-charge 600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make)
Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx600mm long CP towel rail
CP Towel ring
Supplying all materials ,labour ,T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screws etc.all complete as per specification and direction of Engineer-in-charge. CP soap holder
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge.600mmx125mm glass shelf with CP/NP guard rails
Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge Mirror(Bevellededge) 600mmx450mm
Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etcall complete as per direction of the Engineer in charge. Ground Floor;-
Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge Ground Floor;-
Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. Ground Floor;-
Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground Floor .
Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany / Johnson to be pre-approved 600 x 600mm of size In Ground Floor
Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany 300mm x 600 mm size of Ground Floor
Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm. (Darwaja /Exon Door make) 2x0.75x2.10=
Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm
Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm
Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity
INR Forty Three Thousands Eight Hundred Twenty Five and Paise Eighty Only
INR Forty Two Thousands Six Hundred Fifty Eight and Paise Twenty Only
INR Seventy Three Thousands Four Hundred Sixteen Only
INR Two Thousand Five Hundred Thirty Nine and Paise Seventy Six Only
INR One Thousand One Hundred Forty Four and Paise Fifty Four Only
INR Eight Hundred Sixty Two and Paise Twenty Four Only
INR Two Thousand Eight Hundred Ninety One and Paise Ninety Seven Only
INR Eight Thousand Thirty Two and Paise Sixty Only
INR Twenty Four Thousands Seven Hundred One and Paise Ninety Three Only
INR Six Thousand Forty Eight and Paise Ninety Three Only
INR Four Hundred Seventy One and Paise Eighty Five Only
Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground Floor
INR Two Thousand Five Hundred Thirty One and Paise Ten One Only
INR Three Thousand One Hundred Fifty Five and Paise Twenty Nine Only
INR Nine Hundred Twenty Seven and Paise Twenty Only
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 2.13 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_2.pdf
PDF • 1.15 MB
Tendernotice_1.pdf
PDF • 2.85 MB
BOQ_568143.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .