Design, Fabrication, Installation, Testing and commissioning of 1 No.40 MT (12m x 3m) pit type computerized weigh bridge conforming to BIS 9281 of 1979 with up to date amendments at Government food store FCS and CA Department Jammu at Bhaderwah in Di

Amount

Earth work in excavation by mechanical means hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: Ordinary Rock

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominalsize) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing andreinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

In the operator Room: Providing and fitting of 1 No. Door of size 7’x4’ with iron frame fitted with plywood , 1 No. window 5' x 3' made of aluminium with 4mm glass pane of appriopriate size and other necessary fitments like (handles, tower bolt (both sides), hinges, door/ Window bolt, door closure of standard make etc.). . Applying two primer coats and two coats of synthetic enamel paint on window frame/door frame and grills and completing the job by applying synthetic enamel paint. Job also includes letter writing on the front wall of operator room for marking the weight bridge along with department nomenclature. Providing and fitting of 100 mm rain water PVC pipe, making of 2 No. Khuras and 4 No. bend and fitted with grating. Complete job includes Labour charges (skilled, semi-skilled), hire charges for the machinery used during civil works like JCB, crane and other tools and tackles required for the execution of job along with the cost of building materials including transportation charges besides charges of installation. Providing and fitting of mono-block pump-set 1Hp ( Crompton or Havells or kirlosker or equivalent make) along with all allied accessories in the sump tank for the disposal of rain water and MS sheet lid of suitable size for the sump tank. Providing of one No. office table besides 3 No. office chairs as well. In bathroom: P/F of 1 No Door of size 7'x 2' with iron frame fitted with plywood , 1 No. Ventilator 2' x 2' made of aluminium with Exhaust fan of appriopriate size and other necessary fitments like (handles, tower bolt (both sides), hinges, bolt, door closure of standard make etc.). . Applying two primer coats and two coats of synthetic enamel paint on window frame/door frame and grills and completing the job by applying synthetic enamel paint. Providing and fitting of mono-block pump-set 1Hp ( Crompton or Havells or kirlosker or equivalent make) and 1000 Ltrs Water Tank and allied pipe and pipe fittings tap, Indian ceraminc seat, cistern and other bathroom fittings. Complete JOb.

Chemical earthing and lightening arrestor for electrical/ electronic component by excavation of pit proper size from main body and neutral for providing and laying of copper rod in hard and soft soil suitable for 12 feet long copper electrode followed by filling of required quantity of earthing chemical. P/F of suitable copper strip from copper electrode upto the machines. The job includes filling of pit with excavated soil with fitment of all kinds of earthing material. (For Further Details See Annexure A & Technnical Specification Uploaded with SBD)

Digital Microprocessor Based Weigh Indicator with inbuilt flash memory 0f 100000 entries, junction box, Parallel Display unit and direct printer outputs along with provision of offline data transfer along with accessories like Desktop PC:Desktop PC with processor INTEL i3 12th gen/equivalent AMD Ryzen or more with integrated graphics, Memory- 16GB DDR 4 or higher, hard disk 512 GB SSD(Sata or NvMe), Monitor size notless than 18.5”, including software for interference with weigh bridge must be genuine and original and not pirated. TCP and UDP port for software operation • Recommended CAT6 Ethernet cable to Ethernet connectivity. • For effective performance 100 Mbps - 1Gbps network speed. The job also includes providing and installation of 01 no. Mono laser printer with resolution of 1200 dpi or higher The computer along with its peripherals shall be compatible with the overall system and must ensure proper functionality of the whole system. An additional display unit at a suitable place outside the cabin of weighbridge for clear viewing of drivers in day light or in darkness of character size of 100 mm, 7 digit bright, LED type to be provided. . Providing and installation of CCTV system with HD or IP 2 bullet/ dome camera as required during execution of work along with allied 1 TB HDD storage , DVR/ NVR system and fire extinguisher ABC type: 2 No. inside the operator room and area around weight bridges. Complete Job includes cost of material, its installation, loading, unloading, carriage and all the tools, tackles required to execute the job. (For Further Details See Annexure A & Technnical Specification Uploaded with SBD)

Electrical wiring in both Bathroom and Operator Room, switches, pure Sine Wave Invertor (Not Less than 1600 VA) with twin Batteries of CAPACITY 12 V 150 AH each) with allied fittings etc. Fitting of one no. ceiling Fan, 6 no. LED-(12W) along with holders, with 02 No. 5A socket, 15A socket-02 no. , 2 nos LED Flood lights(50W) along with fittings outside the operator room & connecting with main power supply including all the wirings etc. MCB/junction box and other allied electrical accessorie. Providing and fitting of service line of requisite size for main supply in the Operator Room. The job also includes providing and fitting 01 no. 1.5 Tonnes 5 star split air Conditioning cum heating unit, Automatic Voltage Stabiliser-5KVa (Range 90V to 280V) for voltage correction. Complete Job includes cost of material, its installation, loading, unloading, carriage and all the tools, tackles required to execute the job. Preferable Make for Electrical Wires and Fittings are Havells or Anchor or Finolex Polycab or Equialent make. Preferable Make for Invertor are Microtec or Amron or Luminious or Livfast or equivalent make. Preferable Make for Battery are Exide or Amron or Livguard or Equivalent make. Preferable make for Automatic Voltage Stablizer are V Guard or Microteck or Voltas or Equivalent Make. Prefereble make for AC cum Heating unit are OGeneral or Hitachi or Samsung or Panasonic or Equivalent Make. (For Further Details See Annexure A & Technnical Specification Uploaded with SBD)

Design, Fabrication, Installation, Testing and Commissioning of Pit type computerized weigh bridge 40 MT capacity having platform size of 12 m x 3m. The weighbridge structure should be robust and fabricated of steel of600, 300 mm ISMB girder for main beams, cross beams, transverse beams. The structure shall be suitably painted with two coats of anti-corrosion paint. The entire structure shall be mounted on six nos. load cells which will be anchored and grouted on six concrete pedestals. (Civil Work not included in this Job) Platform Material for steel construction confirming to IS 2062 as amended on date. Fabrication & Construction conforming to IS 800. Providing and fitting of Chequered/Antiskid MS Deck Plate of thickness not less than 12 mm as per IS 2062 with up-to-date amendment. All the steel work has to be painted with two coats of anti-corrosive and two coats of finished paint after preparation of surface to be applied for protection against rust. Nuts and bolts, fasteners to be used should be high tensile strength only. Job also includes Cost of stamping by Legal Metrology Department (J&K) and charges for inspection by third party (RITES, CEIL or any other equivalent agency). The sealing and stamping of load cells as well as that of the total weighing system shall conform to the requirements laid down under “Indian Weights & Measures Act, 1976”. The job includes providing and fitting of 06 no. Load cells (Stainless Steel Digital Compression type load cell each having 20 MT Capacity or above with resolution of 5 kg, Operating temperature range -20 degree Centigrade to 65 degrees centigrade with safe overload of 150%. Load cells shall be hermetically sealed and have IP68 protection class. Test certificate in conformation of the above class by a reputed Test House to be provided. Weighbridge readings shall not differ by more than one resolution value, when the vehicle is placed on different locations on the weighbridge. The Cost includes taxes, freight and transit insurance besides 1 year warranty of allthe equipment and all other taxes as applicable. (For Further Details See Annexure A & Technnical Specification Uploaded with SBD)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Carriage of cement by Mechanical Transport for an average distance of 10 Km (ten Kilometres) from nearest source to the site of work incl. loading, unloading and stacking complete.

Carriage of stone aggregate above 40 mm by Mechanical Transport for an average distance of 30 Km (thirty Kilometres) from nearest source to the site of work incl. loading, unloading and stacking complete.

Carriage of Sand and stone aggregate below 40 mm by Mechanical Transport for an average distance of 30 Km (thirty Kilometres) from nearest source to the site of work incl. loading, unloading and stacking complete.

Disposal of surplus earth av, distance 100 Mtr.

Carriage of Steel by Mechanical Transport for an average distance of 30 Km (thirty Kilometres) from nearest source to the site of work incl. loading, unloading and stacking complete.

Hire and HSD Charge for Inspection vehicle to engage for execution of above said Work.

S. M. F. ENTERPRISE

LEOTRONIC SCALES PVT. LTD.