8162/2022-23/E8 PROVN OF B VEHICLE SHED AT FIELD HOSPITAL KIARI MIL STN UNDER GE 860 EWS

Amount

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth for foundation and getting out in loose/ soft soil complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete RCC (M-25) Design mix (using 20mm graded crushed stone aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete RCC (M-25) Design mix ) using 20mm graded crushed stone aggregate) Columns, pillars, piers, posts and struts complete all as specified and as directied.

M&L form work to sides of concrete foundations, footings, bases of columns raft and beams sides and soffits(if any) of foundations and plinth,beams and similar work,vertical or to batter,for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L form work to sides of pillars, posts, struts, piers, columns and stanchions, for square, rectangular or poygonal, rough finished surfaces of concrete complete all as specified and as directed.

M &L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M &L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M & L mild steel plate Roof trusses (framed), trussed, purlins, crane gantries, rails, post, bracing and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingFe 410 -W (Gde?E- 250)quality complete all as specified and as directed.

M&L for Mild steel screw bolts dia of neck 16 to 20mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n exc 30cm long complete all as specified and as directed.

M & L for preparation new steel untread Surfaces of any description, over 10cm in width or girth,not otherwise described applying two coat of synthetik enamel paint over a red oxide primer complete all as spacifed and directed

M & L Precast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:6 complete all as Specified.

M&L for Rendering 10mm thick 1:6 cement mortar on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick 1:4 cement mortar on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered surfaces and apply two coats of cement base paint over a coat of primer complete all as specified and directed

M&L for preparation surface and apply three coats of white wash on newly plastered surface complete all as specified and directed.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L for 100 mm Hard core, broken stone to gauge n exc 63 mm complete all as specified and as directed.

M&L for 75mm thick cement concrete Type D-2 1:4:8 (40mm graded crushed stone aggregate) complete all as specified and as directed.

M&L for 150mm thick cement concrete Type B-2 1:2:4 (40mm graded aggregate) concrete complete all as specified and as directed.

M & L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound complete all as specified and as directed.

M&L point wiring complete for one light / bell / fan point controlled by one no, 1-way, 5 Amps switch. with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)

All as per Srl item no. 23 here-in-before but one 3 Pin socket outlet, 5 Amp on independent board

All as per Srl item no. 23 here-in-before but one 3 Pin socket outlet, 5 Amp on same board

All as per serial item No 23 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm FRLS PVC copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including FRLS PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly.

Supply and fixing switch piano flush button single pole one way 5 Amps complete all as specified.

Supply and fixing socket 2 in 1, 5 Amp, flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing angular lamp holder, PVC/Polycaronate type with back plate suitable for 9 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing LED 12 Watt complete all as specified

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing 1 x 20W , 220V , AC decorative tupe including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling complete all as specified.

S&F in replacement of DB, Single Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

Supply and fixing MCB single pole and neutral 32 to 40 Amps , 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing MCB single pole 5 to 30 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing new energy saving Bulk head fitting 12 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Eng-In-Charge

Supply and fixing LED Flood light luminaire with aluminium dia cast housing luminaire with unique lens system for intense uniform illumination and toughened glass with sillicon gasket for IP 66 protection acting as heat sink complete with all accessories incl two run of 1.5 Sqmm Copper conductor cable from street light to junction box /OH conductor / Switch board / MCB fitting complete of 60W LED including required modification for fixing the same in existing bracket / GI light grade pipe etc all as specified and directed by Engineer in charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 1991 Part-I and connecting to CBDB’s as specified or indicated including testing on completion .

Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 10 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge

Excavation in trenches not exceeding 1.5m and not exceeding 1.5m in depth for laying of electric cable and getting out in hard and dense soil, complete all as specified and as directed by the Engr-in-Charge.

Returning, filling in excavated soil, including leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by the Engr-in-Charge.

Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engr-in-Charge.

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified.

Material and labour for sand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after laying , stretching & testing of cable in trenches complete all specified and directed by Engr-in-Charge. Note:- Only punned thickness i.e. 18 cm shall be measured and paid.

N K BUILDERS

M/S GLOBAL ENGINEERS

M/S MA CONSTRUCTION Co

M/s Koul & Sons

osho traders

M/S TRADE LINK

M/S Web Company

HONY CAPT RIGZIN SAMPHEL