SPECIAL REPAIR TO BUILDING NO T-15 AT COBRA URC HQ MB AREA AND SPECIAL REPAIR TO INTERNAL WIRING OF HQ MB AREA UNDER GE (WEST) JABALPUR

Amount

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

Drilling (Horizontally) to existing road (maximum 10M wide) suitable for passing GI tubing of dia upto 50mm as required at site complete all as specified and directed. Note:- All necessary T&P required at site for drilling shall be arranged by contractor at his own cost and quoted rate shall be deemed to be included for all these provisions and nothing extra shall be paid on this account.

Supplying and fixing/ laying of 50mm bore dia GI pipe light grade in trenches/ under roads/ along pole/ wall including all fittings, ISI marked as required for cable protection etc complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregates, as in foundation filling, mass concreting etc, complete all as specified and directed.

Supply,laying & fixing Double Wall Corrugated (DWC) pipes made of High Density Polyethylene (HDPE), 50 mm outer dia and 38 mm inner dia, with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc. complete all as specified and directed.( Make : Telerex/Tirupati or E-in-C approved Make)

Supply,laying & fixing Double Wall Corrugated (DWC) pipes made of High Density Polyethylene (HDPE), 63 mm outer dia and 48 mm inner dia, with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc. complete all as specified and directed.( Make : Telerex/Tirupati or E-in-C approved Make)

M&L for 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5 cm long complete all as specified & directed.

M&L for 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but not exceeding 15 cm long complete all as specified & directed.

M & L Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' modular fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) including flush pointing external faces with the same mortar complete all as specified & directed.

M&L for mils steel galvanised powder coated T-grid frame work of make as approved by GE for suspended false ceiling with size of grid 600 x 600mm consisting of main tee/ runner of size 35 x 25 x 1.3 mm, cross tee of size 25 x 25 x 1.3 mm and wall angle of size 25 x 25x 1.5 mm suspended @ 1.2M c/c both way with and including 4mm dia GI wire with J hook, nuts/bolts, butterfly clips, soffit cleat/ rawl plug etc as per manufacturer's instructions and 8mm thick pre-primed, self embossed, textured designer, water & termite resistant calcium silicate boards for insulation complete all as specified and directed. Make: Armstrong or Ramco Industries or equivalent brand of other Make as approved by GE from list of makes attached with tender documents.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed..

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling timber scantling, unframed, 40 Sqcm and over in section in any position complete all as specified and directed.

M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

Dismantling of AC (corrugated or semi corrugated etc.) sheets including ridges in roof coverings complete all as specified & directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde E- 250), quality - A complete all as specified and directed.

M&L for Plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Supply and fix square / rectangular rolled mild steel hollow sections conforming to Fe- 410-W (Gde E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates etc complete all as specified & directed.

S&F for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F framed work as in iron enclosure, doors or gate of angle iron or other section with gussets plate, rails, braces etc drilled for fixing of steel seating other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account.

Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150)corrugated steel sheet of any colour having minimum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed. Make: Tata Blue Scope Steel Ltd or M/S Cril Colour Roof India Ltd. or Everest Industries Ltd or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

S&F of pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150) plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) fixed with self tapping screws complete all as specified & directed. Make: Tata Blue Scope Steel Ltd or M/S Cril Colour Roof India Ltd. or equivalent brand of other Make as approved by GE from list of make attached with tender documents.

M&L for mild steel work conforming to Fe-290 Gde -165 as in nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection finished even and smooth without using extra cement forming joints to full depth at every 3M intervals and at every change of direction and filing with bitumen sand mixture 1:3 by weight complete all as specified and directed.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:6 on internal surfaces of wall, finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for prepration of new plastered surfaces of walls and applying two coats of cement base paint over & including a coat of cement base primer complete all as specified & directed.

M&L for prepration of old plastered surfaces of walls of any description by complete removal of existing treatment and applying wall care putty @ 1.0Kg/ Sqm and application of two coats of distemper, oil emulsion, white or tinted, on smooth and even surfaces of wall complete all as specified and directed.

S&F 1mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper, oil emulsion, white or tinted, with and including 2mm thick wall care putty and one coat of appropriate primer complete all as specified and directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer as approved by GE complete all as specified & directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as on vertical surfaces such as skirting/ dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles, over and including 10mm thick rendering in CM (1:4) complete all as specified & directed..

Supply and fix in repair 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ ceiling with & including necessary clamps of requird size etc complete all as specifed & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Supply and fix 110mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed. Make:- Supreme or Kisan Mouldings pvt Ltd or Finolex as approved by GE.

Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed at site.

Taking down existing old/ unserviceable sub main wiring of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified and directed.

Taking down carefully and refixing carefully recess mounting LED lights of any make and size after repairing the light with serviceable parts of the same Make, all as required and directed at site

M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed for the followings : -

(a) One light point controlled by one, One way switch 5 Amp

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amp

(c ) One bell point controlled by one bell push 5 Amp

d) One socket point 5 amp controlled by one switch on independent board but below the switch board of the light point in same vertical plane

(e) One socket point 5 amp controlled by one switch on same board.

(f) One socket point 5 amp controlled by one switch on independent board

(g) One light point controlled by one, two way switch 5 Amp.

M&L for Point wiring with three layer PVC insulated 1.5 sqmm multi strranded copper conductor FRLS cable 1100 volts grade drawn into the existing conduits including all fitting and fixing accessories including sunken pressed steel terminal boxes suitable of modular switches /sockets and including inner/ outer plates cover for mounting /modular switches sockets ,modular fan regulators fixed with CP screws with cup washers and PVC insulated 1.5 sqmm multi stranded copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar all as specified and directed by Engineer in charge for the followings :-

(a) One light point controlled by one, One way switch 5 Amp

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amp

(c) One socket point 5 amp controlled by one switch on same board.

(d) One socket point 5 amp controlled by one switch on independent board

(e) One socket point 5 amp controlled by one switch on independent board but below the switch board of the light point in same vertical plane

(f ) One bell point controlled by one bell push 5 Amp

(g) One light point controlled by one, two way switch 5 Amp.

M&L for Point wiring with three layer PVC insulated 2.5 sqmm multi stranded copper conductor FRLS cable 1100 volts grade for 3/6 pin switch socket outlet 15 Amp on independent board, drawn into the existing conduits including all fitting and fixing accessories including sunken pressed steel terminal boxes suitable of modular switches /sockets and including inner/ outer plates cover for mounting /modular switches sockets ,modular fan regulators fixed with CP screws with cup washers and PVC insulated 2.5 sqmm multi stranded copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar all as specified and directed by Engineer in charge .

M&L for Point wiring with three layer PVC insulated 4 sqmm multi stranded copper conductor FRLS cable 1100 volts grade for 5/15 Amp switch socket combination, drawn into the existing conduits including all fitting and fixing accessories including sunken pressed steel terminal boxes suitable of modular switches /sockets and including inner/ outer plates cover for mounting /modular switches sockets ,modular fan regulators fixed with CP screws with cup washers and PVC insulated 4 sqmm multi stranded copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar all as specified and directed by Engineer in charge .

M&L for point wiring concealed type with 2.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 2.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket outlet 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed.

M&L for point wiring concealed type with 4 sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 4 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket outlet 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed.

Supply and fix, Single phase, ceiling fan 1200 mm sweep, permanent magnet Brushless Direct Current(BLDC) Motor 230 Volt, 50 Hz, 5 Star rated , 26-30 Watt, rated current 0.16 amp, pf 0.98, 370/360 rpm, minimum air delivery 210 CFM with service value greater than 6.00 BEE, number of blades three, type of blade leaf 1.05 mm thick aluminium sheet, remote control, radio frequency, 5 speed +off timer option speed regulation, class of insulation 'B' with two nos bearings including connecting wire from ceiling rose to fan terminal complete with all as required and directed at site by Engr -in charge

S & F for Modular Switch piano flush type single pole one way 5/6 Amp of polycarbonate body complete all as specified & directed.

S & F for Modular Switch piano flush type single pole one way 10 Amp of polycarbonate body complete all as specified & directed.

S & F for Modular Switch piano flush type single pole one way 15/16 Amp of polycarbonate body complete all as specified & directed.

S & F for Modular Switch piano flush type single pole two way 10 Amp of polycarbonate body complete all as specified & directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 10 Amp and 2 pin, 10 Amp, 2 module piano flush type polycarbonate body complete all as specified & directed.

S & F for Modular Socket 6 amps 3/5 pin combined , 2 module piano flush type polycarbonate body complete all as specified & directed.

S & F for Modular Socket 15/16 amps 5/6 pin combined , 2 module piano flush type polycarbonate body complete all as specified & directed.

S & F Modular Switches 5 /6 AMPS single pole two way , 1 module piano flush type polycarbonate body complete all as specified & directed.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 10 Amp, 2 module piano flush type polycarbonate body complete all as specified & directed.

Supply & fix ceiling rose, surface bakelite, 65x50mm surface type, two to three terminals, AC 240 volts complete all as specified & directed.

Supply & Fixing in replacement Bulk head endura LED light fitting high ingress protection, IP 66 protection, compact integral design, pressure die cast housing with robust polycarbonate cover complete and making necessary electric connection to ceiling rose with copper conductor of suitable size & length and accessories complete all as specified & directed. (Make : Philips Model no WT202W LED 65 CW PSU S3 PC or Equivalent make in BAJAJ/ Havells /Surya as approved by GE)

S&F in replacement LED ceiling light fitting LED Luminaire Suspended light decorative slim capacity 36 watt with diffuser channel Luminaires , connector block, etc . Complete with all accessories internally pre-wired , connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer in charge. (Make: Surya cat SLE BLSM 36S IL AURORA or Philips / Bajaj/Havells as approved by GE)

Supply and fixing in replacement of LED T - 8 tube light box type fitting with single side connection polycarbonate LED tube rod 22 W 4 feet 1 x 22 Watt MS CRCA box type including rotary type bi pin holder and csonnection with PVC insulated twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed. (Make : Philips cat part No - BN021LED22S 6500/4000 PSU GR/SI or Havells, Bajaj or equivalent as approved by GE)

Supply and fix electrical bell model city ding dong (Ding dong type) AC, 240 Volts complete all as specified & directed. Make:- Anchor or Cona or Plaza as approved by GE.

S & F modular switch bell push 6 amp, 1 module, 230 Volts complete all as specified and directed at site.

S & F 32 Watt LED tube light fitting hanging from ceiling /fixing on wall suitable for indoor application with all fixing accessories including taking down old unserviceable tube light fittings complete all as required and directed . (Make: Philips cat part no: SM270C LED 30S 6500 PSU WH or equivalent Make in Bajaj /Havells as approved by GE)

S&F lamp holder PVC/Polycarbonate type body, with back plate for batten fittings with and including LED lamp 9 Watt complete all as specified and directed .

S & F in replacement LED Smart bright batten light fitting complete with extruded aluminium housing with high quality poly carbonate diffuser of 12 watt capacity complete with fixing arrangements on wall all as specified and directed. (Make:-Philips Model No BN 021 LED 12S 6500 PSU GR or equivalent make of Bajaj /Havells/Surya as approved by GE

Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), (Make : Philips Cat part No BN 021 LED 22S 6500/4000 PSU GR S1 or Equivalent as approved by GE)

Supply & Fixing Indoor commercial recessed mounted luminaires energy efficient LED luminaire suitable for 600mm x 600mm grid ceiling light, not less than 36 watt with diffusers channel incluidng all accessories, internally pre-wired & making connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. (Make: Philips Cat part no: RC383B LED 36S 6500 PSU OD WH PIRor equivalent in Havells/Bajaj/Surya as approved by GE)

Supply & fixing in repair LED light, downlighter die cast aluminium luminaire in powder coated white with drop down PC diffuser with optimised heat sink with replaceable electronic driver complata recess or surface mounted 15 watt with fixing arrangemnts on ceiling with steel chain complete all as specified & directed. mkae SURYA CAT NO SLIDER 15 W STELLAR /Havells Cat No RISEDLR15WLED83OS or Bajaj/Philips make as approved by GE)

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed.

Supply and laying un-reinforced precast concrete cable cover, Class LV, Flat, size 250mm x 150mm x 40mm complete all as specified and as directed.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 25 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 25 sqmm, 4 core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 35sqmm, 3.5 core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 50sqmm, 3.5 core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 70sqmm, 3.5 core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 95sqmm, 3.5 core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 10sqmm, 4core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 10sqmm, 2core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 16sqmm, 2core including jointing materials such as cable glands & lugs etc Complete all as directed. Make:- Havells or Finolex or Gloster or Plaza or Universal as approved by GE.

Supply and fixing/ laying of 50mm bore dia GI pipe light grade in trenches/ under roads/ along pole/ wall for cable protection including all necessary fittings & clamps made out of 25x3mm flat iron etc as required complete all as specified and directed. Make:- JINDAL or ZENITH or TATA as per approved by GE.

S&F, sheet metal enclosure distribution boards, double door, factory made TPN Vertical 8 way 3 phase 415 volts with 200 amps rating copper bus bar, Din rail earth bar with blanking plate wherever required and IP- 43 degree protection complete all as specified and directed . ( Make : Legrand Cat Part No 507747 or equivalent Make of Siemens / GE as approved by GE)

S & F Sheet metal enclosure DBs Single Pole and Neutral 12 way with 200 Amps rated copper bus bar 240 volts double door complete all as specified and directed by Engineer in charge. (Make : Legand cat part No - 507612 or equeivalent Havells/L&T/ABB as approved by GE)

S & F Surface mounted LED track light 10 Watt with COB technology luminaires complete all as required and directed at site .

S&F, sheet metal enclosure distribution boards, double door, factory made TPN Vertical 4 way 3 phase 415 volts with 200 amps rating copper bus bar, Din rail earth bar with blanking plate wherever required and IP- 43 degree protection complete all as specified and directed . ( Make : Legrand Cat Part No 507745 or equivalent Make of Siemens / GE as approved by GE)

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 10.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 10 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 10.0 sqmm cable & one run of 10 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 2.5 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 2.5 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 2.5 sqmm cable & one run of 2.5 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

Supply and fixing, in replacement, decorative wall light fitting made up of pre die cast housing IP-65 Protection against dust and water of 6.50 Watt complete with fixing arrangements on wall all as specified and directed. (Make Make- Philips Cat part no WT140W LED7S CW PSU S1 PC or equivalent Make in Surya/Bajaj/Havells as approved by GE)

Supply & fixing in repair 40 mm dia non metallic Rigid PVC conduit, ISI Marked conforming to IS : 9537 medium grade Including all fittings like bends, elbow reducer, junction boxes, tee bell mouth and fixing accessories such as couplers, lock, nuts, saddles, pipe hooks etc complete including cutting & chasing required on brick wall not exceeding 10 CM girth for concealed conduit wiring and making good the disturbed surface with cement mortar 1:3 and finishing the disturbed surface to match with existing specification complete all as specified & directed

Supply & fixing in repair 25 mm dia non metallic Rigid PVC conduit, ISI Marked conforming to IS : 9537 medium grade Including all fittings like bends, elbow reducer, junction boxes, tee bell mouth and fixing accessories such as couplers, lock, nuts, saddles, pipe hooks etc complete including cutting & chasing required on brick wall not exceeding 10 CM girth for concealed conduit wiring and making good the disturbed surface with cement mortar 1:3 and finishing the disturbed surface to match with existing specification complete all as specified & directed

S &F MCB DB 2 Way sheet metal enclosure with MCB 10 Amps SPN complete with fixing arrangements complete all as specified and directed.

S&F sheet metal enclosures with socket plug Top and one MCB 20 A single pole and neutral enclosure with a two pin and earth plug and socket, 240 V complete all as specified and directed.

Relaying or refixing or repassing in trenches/ on poles/ through pipes after taking out/ taking down the existing LT 1100 volts grade cables from trenches/ poles/ pipes and testing on completion complete all as directed. Notes:- (i) Excavation and earth work, sand cushioning and cable covers/ brick protection shall be measured and paid seprately under respective items. (ii) Taking out/ taking down shall be done only after disconnecting all the connections of the cable from over head lines and panels.

Supply & fixing, in replacement, Kit kat DB by SPN Distribution box double door, protection grade IP 43, in fine powder coated matt finish with best CRCA sheet fitted with shrouded neutral insulated pin type copper bus bar Din rail earth bar, 8 way conforming to IS 13032 & 8623 complete all as specified and directed ( Make : Legrand CAT NO 507621 / SIEMENS / Schneider (Electric) as approved by GE)

Supply & fixing, in replacement, Kit kat DB by SPN Distribution box double door, protection grade IP 43, in fine powder coated matt finish with best CRCA sheet fitted with shrouded neutral insulated pin type copper bus bar Din rail earth bar, 12 way conforming to IS 13032 & 8623 complete all as specified and directed ( Make : Legrand CAT NO 507622 / SIEMENS / Schneider (Electric) as approved by GE)

Supply & fixing, in replacement, Kit kat DB by SPN Distribution box double door, protection grade IP 43, in fine powder coated matt finish with best CRCA sheet fitted with shrouded neutral insulated pin type copper bus bar Din rail earth bar, 8 way conforming to IS 13032 & 8623 complete all as specified and directed ( Make : Legrand CAT NO 507611 / SIEMENS / Schneider (Electric) as approved by GE)

Supply & fixing, in replacement, Kit kat DB by SPN Distribution box double door, protection grade IP 43, in fine powder coated matt finish with best CRCA sheet fitted with shrouded neutral insulated pin type copper bus bar Din rail earth bar, 4 way conforming to IS 13032 & 8623 complete all as specified and directed ( Make : Legrand CAT NO 507620 / SIEMENS / Schneider (Electric) as approved by GE)

Supply & Fixing sheet metal enclosure MCB DB double door, Triple pole and neutral, 440 volts, 4 way with 200 Amp, 10 KA breaking capacity rated copper bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed. (Make : Legrand CAT NO 507640 / SIEMENS / Schneider (Electric) as approved by GE)

Supply & fixing LED light fitting surface/integral 36 watt complete with bracket and connecting wire, clamps complete all as specified & directed. (Make: surya cat part no: SLE VLSM 36S LL AURORA -IIXX/Philips/Havells as approved by GE).

Supply & fixing, in repair, cubical board (for meter box) of size 750 mm x 500 mm x 150 mm with 1.6 mm thick CRCA sheet cover with fabricating of required size welding moulding of required shape with suitable hinging device & providing locking arrangement with & including Godrej pattern locks, five lever, 65 mm size having three keys fixed in meter box with cutting the sheet in square shape / size of 100mm x 100mm (06 Nos) with providing transparent fibre sheet for looking the meter from outside and painting steel surface with two coats of grey colour synthetic enamel paint over a coat of red oxide primer and fixed on wall with required nut, bolts and grouting on wall and making holes for connections complete all as specified & directed.

Taking down existing exhaust/ ceiling fan of any size/ sweep for keeping the safe custody and re-fixing/ re-hanging the same after repair work or as directed and connecting up the same with & including twin twisted copper flexible wire from ceiling rose to exhaust/ ceiling fan complete all as specified & directed..

Supply and fix Single phase propeller type Exhaust fan heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvrers and shutters including electric connection with PVC flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply & fix MCB SP, 6 Amp to 32 Amp, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed. Make:- ABB/ Legrand/ Siemens/ L&T/ Havells as approved by GE.

S & F MCB SPN 63 amps , 240 volts 10 KA breaking capacity , 'C' series, ISI Marked, complete all as specified and directed.

S & F MCB SPN 40 amps , 240 volts 10 KA breaking capacity , 'C' series, ISI Marked, complete all as specified and directed.

S & F MCB TPN 63 amps , 415 volts 10 KA breaking capacity , 'C' series, ISI Marked, complete all as specified and directed.

Supply & Fixing MCCB with thermal magnetic protection, 100 amps 415 volts 3 pole, 16 KA complete all as specified & directed. Make : Legrand cat no DPX3 TP 420004 / Siemens/ schenider as approved by GE

Supply & Fixing MCCB with thermal magnetic protection, 63 amps 415 volts 3 pole, 16 KA complete all as specified & directed. Make : Legrand cat no DPX3 TP 420003 / Siemens/ schenider as approved by GE

Supply & Fixing MCCB with thermal magnetic protection, 160 amps 415 volts 4 pole, 25 KA complete all as specified & directed. Make : Legrand cat no DPX3 160 / Siemens/ schenider as approved by GE

Supply & Fixing MCCB with thermal magnetic protection, 160 amps 415 volts 4 pole, 25 KA with sheet metal enclosure complete all as specified & directed.

Supply & Fixing RCBO double Pole 240Volt, 32 Amp,100 mA protection for earth over load and short circuit complete all as specified & directed. Make : Legrand cat part No 411333 or equivalent make of Siemens / GE as approved by GE.

Supply & fixing, in replacement, AC/Geyser box by sheet steel enclosure in single pole and neutral fitted with two pin and earth plug and socket complete with and including one single pole MCB, 240 volt, 20 Amps , 'C' series of suitable rating complete all as specified and directed . (Make- Legrand cat no 507814 or Schneider Electric/Hager as approved by GE)

S & F stepped type electronic fan regulator flush Type complete all as specified and directed at site.

S & F Ceiling Fan regulator modular electronic ROTARY / Step type 80/120 Watt capacity of ploycarbonate body, 2 module, ISI marked complete all as specified & directed.

S &F Table lamp made of MS with good finish with and including LED Bulb 10 Watt complete all as specified and directed . (Make of Table Lamp: DECON or equivalent Makes as approved by GE)

Supply & fix, in replacement, LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75+ 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens including mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint complete all as specified and as direced

Supply & fixing in repair LED light downlight recessed or surface mounted 9 Watt with and including fixing arrangements on ceiling with steel chain complete all as specified & directed.(Make: Philips/Havells/Bajaj as approved by GE)

Supply and fix on-load change over switch of capacity 400 Amps in sheet metal encloser, 4 Pole, 415 Volts complete all as specified and directed. Make:- Havells Cat part No. IHCNFE0400 or equivalent model of make- L&T or Legrand or ABB or Schneider as approved by GE.

Supply and fix on-load change over switch of capacity 160 Amps in sheet metal encloser, 4 Pole, 415 Volts complete all as specified and directed. Make:- Havells Cat part No. IHCNFE0160 or equivalent model of make- L&T or Legrand or ABB or Schneider as approved by GE.

Supply, installatioin, testing and commissoning 3 phase and neutral, 415 Volts outdoor type, factory made free standing floor mounting, dust and vermin proof cubical type LT panel fabricated from 3.15 mm thick (minimum) CRCA sheet of outer shell and inner shell will be 2.0 mm thick CRCA sheet with anit corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032) fully compartmentalized design (IP-42 PROTECTION) with 4 Nos of bus bars made of high conductivity 99.9% pure copper of ETP grade suitable for 400 Amp pre wired with suitable size of copper strip having colour coding sleeve copper strip short circuit rating 50 KA (rms) for one second including suitable aluminium earth strips and channel for base conforming to IS and all as specified with supply and fixing the followings :-

(b) Outgoing :- (i) MCCB 160 Amp 4 pole ultimate breaking capacity 35 KA conforming to IS : 13947-2 complete all as specified - 01 No (ii) MCCB 100 Amp 4 pole ultimate breaking capacity 25 KA conforming to IS : 13947-2 complete all as specified - 2 No

Supply, installatioin, testing and commissoning 3 phase and neutral, 415 Volts outdoor type, factory made free standing floor mounted, dust and vermin proof, cubical type LT panel fabricated from 3.15 mm thick (Min) CRCA sheet of outer shell and inner shell will be 2.0 mm thick CRCA sheet with anit corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032) fully compartmentalized design (IP-42 PROTECTION) with 4 Nos of bush bars made of high conductivity 99.9% pure copper of ETP grade suitable for 600 Amp pre wired with suitable size of copper strip having colour coading sleeve, copper strip short circuit rating 50 KA (rms) for one second including suitable aluminium earth strips and channel for base conforming to IS complete all as specified with supply and fixing the followings :-

(b) Outgoing :- (i) MCCB 250 Amp 4 pole ultimate breaking capacity 35 KA conforming to IS : 13947-2 complete all as specified - 01 No (ii) MCCB 160 Amp 4 pole ultimate breaking capacity 35 KA conforming to IS : 13947-2 complete all as specified - 02 No (iii) MCCB 100 Amp 4 pole ultimate breaking capacity 25 KA conforming to IS : 13947-2 complete all as specified - 01 No

Supply and fixing Single phase wall mounted remote controlled fan heavy duty AC 230 volts 400 mm sweep, metallic body complete including electric connection with twin core copper wire for wall mounted fan, nut, clamp & bolt etc complete all as specified and as directed.MAKE :Havells ,CG ,BAJAJ.as approved by GE

Supply , installation, testing and commissioning LT 415 Volts AC 50Hz cubical Panel factory made , outdoor pedestal type, feeder pillar box, hot weather & vermin proof, fabricated of not less than 3.15 mm thick CRCA black sheet front & back, double opening type, spray painted two coats inside and outside with approved paint over a coat of primer, locking arrangement , comprising of 50mm size GODREJ inbuilt lock with duplicate keys, two earth terminals suitable cable glands for all incoming and outgoing cable including grouting of feeder pillar box 60cm above ground level by providing 90cm long angle iron of size 50x50x6mm welded on all four corners embedded in PCC 1:2:4 using 20mm stone aggregate up to 30cm complete all as specified and directed by Engineer-In-Charge including the following accessories :-

(B) Incoming :- (i) Adjustable thermal & Adjustable magnetic MCCB 4 pole 415 volts 250 amps 36 KA breaking capacity (1 No). Make : Havells cat part No- IHLLSEC40320 or Legrand, L&T or equivalent Make as approved by GE (ii) Change over switch 250 Amps 4 pole onload type front handle operated 415 volts -1 No (Make ;- Havells cat part No- IHCNFE0250 or Legrand, L&T or equivalent Make as approved by GE). (iii) Energymeter KWH : 1 No (C) Outgoing : - (i) MCCB 4 Pole 415 volts 63 Amp,16 KA Breaking capacity .- 02 Nos, (Make ;- Havells cat part No- IHLGF0063 or Legrand, L&T or equivalent Make as approved by GE) (ii) MCCB 4 Pole 415 volts 100 Amp,16 KA Breaking capacity - 01 No (Make ;- Havells cat part No- IHLGF0160 or Legrand / L&T or equivalent Make as approved by GE).

Supply , installation, testing and commissioning LT 415 Volts AC 50Hz cubical Panel factory made , outdoor pedestal type, feeder pillar box, hot weather & vermin proof, fabricated of not less than 3.15 mm thick CRCA black sheet front & back, double opening type, spray painted two coats inside and outside with approved paint over a coat of primer, locking arrangement , comprising of 50mm size GODREJ inbuilt lock with duplicate keys, two earth terminals suitable cable glands for all incoming and outgoing cable including grouting of feeder pillar box 60cm above ground level by providing 90cm long angle iron of size 50x50x6mm welded on all four corners embedded in PCC 1:2:4 using 20mm stone aggregate up to 30cm complete all as specified and directed by Engineer-In-Charge including the following accessories :-

(B) Incoming :- (i) Adjustable thermal & Adjustable magnetic MCCB 4 pole 415 volts 320 amps 36 KA breaking capacity (1 No). Make : Havells cat part No- IHLLSEC40320 or Legrand, L&T or equivalent Make as approved by GE (ii) Change over switch 320 Amps 4 pole onload type front handle operated 415 volts -1 No (Make ;- Havells cat part No- IHCNFE0320 or Legrand, L&T or equivalent Make as approved by GE). (iii) Energymeter CT operated : 1 No (C) Outgoing : - (i) MCCB 4 Pole 415 volts 100 Amp,16 KA Breaking capacity .- 03 Nos, (Make ;- Havells cat part No- IHLGF0100 or Legrand, L&T or equivalent Make as approved by GE) (ii) MCCB 4 Pole 415 volts 63 Amp,16 KA Breaking capacity - 03 Nos (Make ;- Havells cat part No- IHLGF0063 or Legrand / L&T or equivalent Make as approved by GE).

Earthing complete with galvanised steel earth pipe, medium grade, 3000mm long with outer dia 65mm and inner dia 50mm, laid in ground by drilling in the ground with top edge not less than 1.25 metre below ground level and filling the back fill compound complete with all as required and directed, as per Electrical Plate No. 2, with 32x6 mm GI strip as earthing lead up to testing point and making the earth pit of PCC as per sample as required at site and testing after completion complete all as specified and directed. (Note:- GI strip from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

M&L for earthing complete with galvanised steel earth pipe 3000mm long having outer dia 65 mm and inner dia 50 mm , directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron strip 32 x 6 mm, by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI earth strip and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Schedule of credit amount of Rs. 2,06,610.00 to be deducted during AOC

Sachdeva Enterprises

DOBARIA BUILDCON