SPECIAL REPAIR TO BUILDING NO T-58 T-84 AND SPECIAL REPAIR TO SEWER LINE AND SECURITY WALL AT JANGLOTE UNDER GE BASOLI

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed..

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

Excavation in over areas n exc 1.5m in depth; and getting out in any type of soil complete all as specified and directed...

Material and labour for PCC 1:3:6 type C-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.

M&L PCC 1:4:8 type D-2 ( Using 40mm graded crushed stone aggregate ) in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and directed.

All as per item No 06 above, but except bricks complete all as specified and directed.

Providing, cement concrete Type B-1 1:2:4 (20 mm graded aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rouinded for chamfered angles and throating, as directing complete all as specified and directed .

Material and labour for M-25 Design mix (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed .

Material and labour for M-25 Design mix(using 20 mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed .

M&L for M-25 design mix as in beams, cantilevers, bressummers, lintels over 1.5m span (using 20mm graded crushed stone aggregate) complete all as specified and directed .

TMT Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed .

All as per item No 12 above but 6 mm to 8mm dia

All as per item No 12 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and sofits of foundation and plinth beams; and similar works; vertical or to batter for rough finished flat surfaces complete all as specified and directed.

Form work to soffits and sides of roof beam finished as ruf finish surface complete all as specified and directed.

Form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed. (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces as in wall in cement mortar 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on stone masonry or other than fair face surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil. complete all as specified and directed.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 450x300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying tiles complete all as specified and directed.

Roughening Surfaces of old Concrete Floor by Picking, sweeping Clean and Washing down with water to remove dust,Etc and applying neat cement slurry @ 3Kg/Sqm, complete, all as specified and directed.

Plain cement concrete 25mm thick 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in floor complete, all as specified and directed .

Plain cement concrete 100mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub floor, sub base complete, all as specified and directed .

Plain cement concrete 75mm thick 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub floor, sub base complete, all as specified and directed .

M&L for providing 75mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Rounding/mouldings to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationscomplete all as specified and directed .

Material and labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick Screed bed or bedding layer in cement mortar 1:4 for laying granite floor complete, all as specified and directed.

S&F steel window/ventilaters including 10mm Sq bar grill factory made out of box type frame and shutter (double shutter, one for glazing another for fly proofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) for filling in the pressed steel door frame/hold fast complete all as specified and directed..

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking off shutters from the frame) exc. 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed .

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing complete all as specified and directed..

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame shall be covered with heat moulded wood grain printed 5mm thick PVC sheet x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90") used insted of exposed portion of PVC sheet beading with solvent cement for stiles and PVC sheets for top rail, lock rail & bathroom rail on either side & as gap insert for rail & bottom rail, panelling of wood drained PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement including 100 mm size PTMT hinges, supplying & fixing in the frame at site as per specification & drawing

Supply and fixing for 35 mm thick Factory made 2nd class hard wood door Glazed and skeleton open rebated and prepared to receive glass, gauze, etc.divided in square with sash bars The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.20 (a) complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed..

S&FGalvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperature 1.18mm, complete all as specified and directed..

S&F Mild steel barrel tower bolts of stove enamelled black, with bright bolt of size 150mm.complete all as specified and directed..

S&F Mild steel pressed handles,oval type, stove emameled black of size 150mm.complete all as specified and directed..

S&F Mild steel sliding door bolts of size 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section. complete all as specified and directed..

S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate. complete all as specified and directed..

Supply and fix for Decorative curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preperation of new plastered surface of wall and applying two coat of cement base paint over a coat of primer, complete all as specified and directed.

M&L for complete removal of existing surface of wall and applying two coat of oil bound distemper over a coat of wall care putty, complete all as specified and directed.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply and fix in repair for Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm white , with integral foot rests, including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified.

Supply and fix 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe complete all as specified and directed.

Supply & Fix Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms).complete all as specified and directed.

Supply and fix 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-90gms). complete all as specified and directed.

Supply and fix in repair for 15mm dia bore Stop valve fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix for steel water tubing galvanised, 15mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etc complete all as specified and directed.

Supply and fix for steel water tubing galvenised, 20 mm bore, medium grade with all fittings and fixed to walls, including cutting chases in walls etccomplete all as specified and directed.

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe of 20mm bore complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed..

M&L Concrete bed to drain pipes including forming cradles, in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), for 150mm dia pipe complete all as specified and directed..

. M&L Salt glazed stone ware (SGSW) grade 'A' pipes 150mm bore laid and jointed on concrete bed complete incl testing complete all as specified and directed.. (Concrete to be measured and paid for separately).

M&L precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 all as specified and directed incl necessary form work. ( Note:-: Steel reinforcement shall be measured and paid for separately under respective items.)

Construction of septic tank with cover slab RCC M-30(Design mix) for 300 users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil as directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg CEPZ/C-TD/013/13 Sh 1/5 to 5/5 and specified.

Soakage well in exc in ordinary soil, foundation in PCC 1:3:6 wells of honey combed and solid in M-30 Design mix concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-30/ RR masonry/ Filling with brick bats, complete of size 3.6M dia X 4.50M effective depth, all as specified and directed as per Engr-in-Charge and shown on Drg No CEPZ/C-TD/013/13 Sh 1/5 to 5/5

Material and labour for roof treatment with the following specification - (a) Removal of existing old treatment of any type and roughening surfacesof old concrete of picking sweeping and washing down with water (b) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm on primed surfaces. (c) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.6 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with mineral gravel finish. The overlap shall be minimum 150mm on transverse direction and 100 mm on longitudinal direction and sealing overlap by torch application complete all as specified and directed by Engineer-in-Charge .

Material and labour for Machine cut kota stone slab fooring 20-22mm thick over and including 20mm thick screed bed or bedding layer of cement mortar 1:6 for laying kota stone slab and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to obtain mirror finish complete all as specified and directed.

Siupply and fix for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe -290 Gde -E-165,complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed .

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed .

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.), or insulation boards / slabs / blankets, anythickness,including cover fillets complete all as specified and directed .

Dismantling timber scantlings 40 sq. cm and over in section in any position complete all as specified and directed .

Dismantling Asbestos cement (corrugated, semi - corrugated, sheets in roof coverings complete all as specified and directed .

Hacking out old broken glass (any thickness,size,quality Or description) From metal Frame Including punching Or drilling out Old Glazing Pin/Spring Clips complete all as specified and directed .

Supply and fix galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be measured), complete all as specified and directed.

Supply and fix Punched tape concertina coil of dia of coil 610 mm conforming to IS specifications, each coil to be stretched to 6.00 metre length (50 rounds) secured and fixed in position having minimum tensile strength of 1620N/Sqmm of specing steel core wire of size 2.60mm complete all as specified and directed.

Material and labour for 4mm dia galvanised steel wire, 150 x 100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling. complete all as specified and directed .

Material and labour for Boulder filling dry, handpacked tightly, as in wire crate apron bunds. complete all as specified and directed .(Note:- Wire crate shall be measured and paid seperately).

Supply and fix for Posts and struts of MS angle iron in fencing including cutting tops to shape as directed, drilling hole, notching for wire etc flat iron fillets (for securing wire mesh)) including all necessary drilling bolting or riveting etc. complete all as specified and directed.

M&L Chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick , set, jointed and pointed in neat slurry in with grey cement and pigments,complete all as specified and directed.

Material and labour for Running welding in repairs not exceeding 2.5cm in length, thickness of metal to be welded n.exc 6mm complete all as specified and directed.

Supply and fixing MS tube for steel work in tubular trusses including columns purlin rafter etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. -240 and it is painted one coat of zinc chromate primer paint (including preparation of surface) complete all as specified and directed.

Supply and fix for Mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long.Supplied and fixed (diameter of neck 5 to 10 mm)complete all as specified and directed.

Supply and fix for Mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 15 cm but not exceeding 22.5 cm long.Supplied and fixed (diameter of neck 16 to 20 mm)complete all as specified and directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding/Eaves board to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws . complete all as specified and directed.

Supply and fixing Plates ( Plain or chequered ) channels, square cut or notched (ordinary and counter sunk ) forming holes,without any attachment S & F rolled mild steel Fe - 410-W (Gde-E-250) quality "A". complete all as specified and directed.

Supply and fix for powder coated of approved colour aluminium single or double leaf door shutters,in single or two panel aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber/neoprene packing, handles 2 No's in each door, hinges, anodised aluminium snap beading, screws etc in partition of partly glazed (5mm thick tinted glass) and partly prelaminated board 12mm thick (both side)including floor door spring and all fixing arrangement complete all as specified and directed.

Supply and fix in position suspended false ceiling system using E-grid suspended ceiling grid system of M/S Saint Gobain. The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring with 1.5 Sqmm (nominal area)copper conductor FRLS cable (Multi stranded) PVC insulated and unsheathed in and including concealed PVC rigid non metallic conduit (ISI marked) with sunk cast iron/pressed steel terminal boxes of suitable size with 3mm thick plastic laminated sheet for light or one fan point controlled by one switch incl 1.5 Sqmm (nominal area) copper conductor cable (multistranded) PVC insulated and unsheathed with colour code earth wire connected to common earth dolly complete all as specified. Note : (a) Unit rate include for cutting chases for conduit and sinking for boxes and making good to wall, floors etc. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

All as per item No 102 but for one 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per item No 102 but for one 3 pin 5 Amp socket outlet on same board complete all as specified and directed.

Material and labour for Point wiring with 2.5 Sqmm copper conductor FRLS cable (Multi stranded ) PVC insulated and unsheathed cable conductor in and including concealed PVC rigid non metalic concealed conduit (ISI marked) of suitable size with metal flush boxes of adequate size with cover plate for one 3 pin socket outlet 15 amps on independent board incl continuous 2.5 sqmm copper conductor FRLS (multistranded) PVC insulated and unsheathed cable earth wire connected to common earth dolly complete all as specified. Note : Unit rate for cutting chases for conduit and sinking of boxes and making good to wall,floor ceiling complete all as specified and directed by Engineer in charge. The metal flush box and cover plate shall be measured & paid under relevant items of BOQ'

Supply and fix Switch piano, flush type single pole, one way 5 Amp. complete all as specified and directed.

Supply and fix Socket outlet 2 in 1, 5 pin, 5A complete.complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal. complete all as specified and directed.

Supply and fix Switch socket combination 2 in 1, 6 pin, 6 and 15 Amp flush type universal. complete all as specified and directed.

Supply and fix ceiling rose surface bakelite, two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

M&L for Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

Supply and fix for stepped type electronic fan regulator flush type with 5 steps speed control complete all as specified and directed.

Supply and fix in replacement LED tube ceiling light fitting made out of CRCA sheet industrial box type 1x20W, 230V, including LED (tube rod) LED driver, Bipin holders 4 feet long complete with all accessories internally prewired and including connecting up with 3 core twisted flexible copper concutor cable 0.5 Sqmm complete .Make C&S Model : TARA-M/20W or equivalent in Havells/ Bajaj/ Philips/ Crompton

Supply and fix in replacement LED bulkhead fittings luminarie with opal diffuser including (LED lamp type 10 watt LED 6000K), lamp holder etc ,complete all as specified and directed Make : Cat No LHEQAOP7UZ6W010 of Havells or equivalent in Crompton/ Bajaj/ Philips

S&F fans Ceiling fan 1200 mm sweep AC 230 Volts 50HZ, 5 star rated BLDC having nominal elect consumption complete with accessories such as down rod, canpoy, copper wound electric motor, aluminium wings, clamps, rubber reel electronic type regulator etc all as specified and directed Make : Havells or equivalent in Orient/ Bajaj/ Usha

Material and labour for sub main wiring with two run of single core FRLS PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 6.00 Sqmm drawing into and including medium grade PVC non metallic rigid conduit of 20 mm dia and making electric connections including one run FRLS PVC insulated single core copper conductor cable 6.00 Sqmm as a earth continuity conductor(green colour), including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core FRLS PVC insulated copper conductor cable one run of 6.00 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

Supply and fix in repair for MCB SPN 5 to 32 Amps with 10 KA breaking capacity complete all as per specified and directed.

Supply and fix in repair for MCB SP 5 to 32 Amps with 10 KA breaking capacity complete all as per specified and directed.

Supply & fixing in replacement sheet metal powder coated vertical DB double door 8 way SPN with provision of MCB with copper bus bar rated 200 amps neutral link, earth bar and din rail complete all as specified and directed.

Supply and Laying in trenches or passing through pipe or fixing to pole/wall UG cable XLPE, insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,16 Sq mm X 4.0 core cross section area including takingout existing cable complete all as specified and directed.

Material and labour for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.3 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe with funnel with wire mesh at top, 15 mm bore light grade earth lead protection pipe upto main board with RCC cover suitable handle and angle iron frame for pit top and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include the cost of earthing wire and protection upto 7.5 metre length.)

Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof complete all as specified and directed.

Standard engineers

Neeraj Enterprises