Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.2 LAccepted-AOC | ₹17.2 L Quoted ₹17.5 L | L1 | Accepted-AOC Performance security Rs. 86,500.00 shall be submitted before 28 days from the acceptance of the contract as per Condition 19 of IAFW2249 otherwise necessary action will be taken against your firm |
| 2 | L2₹21.3 L+₹3.8 L (21.7%)Rejected-Finance | ₹21.3 L+₹3.8 L (21.7%) | L2 | Rejected-Finance Other than lowest bidder |
| 3 | L3₹21.4 L+₹3.9 L (22.5%)Rejected-Finance 41B 1H JAYANTIPUR PREETAM NAGAR ALLAHABAD | ₹21.4 L+₹3.9 L (22.5%) | L3 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | Bharat Trading Company L3 | UNIQUE FURNITURES SALES L2 | gangotri enteriprises L1 |
|---|---|---|---|---|---|---|
| 1.00Repair of under mentioned furniture items will be carried out as follows (Sl No 1.01 to 22.10 ):- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (Sl No 1.01 to 14.08 ) (b) Work will be executed where the furniture exist in different User Units of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge (Sl No 1.01 to 14.08):- (c) All Timber shall be of 1st class seasoned hard teak wood (Shegun/ Assam Teak ) free from knots and cracks else specified in drg. (Sl No 1.01 to 14.08):- (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (Sl No 1.01 to 14.08):- (e) For wooden items:M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of complete existing polish making surfae smooth by sand paper (Emery paper) with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. There should be atleast one day gap in each step during polishing/painting .(Sl No 1.01 to 14.08):- where ever applicable ) (f): For steel items:- M&L for painting two coat of hammer Tone paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge.here should be atleast one day gap between every step of painting. Note: All material will be used to execute the work should be supplied by contractor in full no peacemeal material will be execpted.(Sl No 1.01 to 14.08):-where ever applicable) | ||||||
| 1.01Charpoy GI pipe ply top | ||||||
| 1.02 | 12 mm thick plywood top BWP Grade (Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) as per existing shape and size with shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete AND 12mm x 6mm thick teak wood beading half round along with the edges duly smoothened of the plywood and rounded at corner fixed with fevicol and headless nails all as directed by the Engineer-in-Charge. | 500 | Each | 1,050 ₹5,25,000 Lowest | 1,400 ₹7,00,000 | 1,100 ₹5,50,000 |
| 1.03 | MS Flat iron of size 40x5mm duly pinted with two coat of black colour synthetic enamel paint over a coat of red oxide primer to be fixed over the long rails equal to existing width of Charpoy including drilling holes suitably as directed by the Engineer-in-Charge.. | 500 | Each | 55 ₹27,500 Lowest | 120 ₹60,000 | 120 ₹60,000 |
| 1.04 | Long rail of 32 mm dia Medium grade GI pipe including cutting and threading complete all as Specified and directed. (Make of Pipe: Tata/Jindal/JSL) | 100 | Each | 250 ₹25,000 Lowest | 400 ₹40,000 | 350 ₹35,000 |
| 1.05 | Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No 1.04 here in before. | 60 | Each | 100 ₹6,000 Lowest | 200 ₹12,000 | 200 ₹12,000 |
| 1.06 | Replacement of unservicable legs from charpoy GI pipe 32mm dia but except pipe including cutting threading etc as required and MS plate of 3mm thick and 36mm dia welded to leg flat iron and clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed by Engineer-in-Charge. Note : Pipe obtained from ser item No 1.04 & 1.05 above shall be used for this items. | 60 | Each | 100 ₹6,000 Lowest | 200 ₹12,000 | 250 ₹15,000 |
| 1.07 | GI Elbow 3 way 32 mm dia medium grade ISI Marked complete all as specified and directed by Engineer-in-Charge. | 150 | Each | 150 ₹22,500 | 60 ₹9,000 | 55 ₹8,250 Lowest |
| 1.08 | Check nuts 32 mm dia complete all as specified and directed by Engineer-in-Charge. | 150 | Each | 39 ₹5,850 | 12 ₹1,800 Lowest | 25 ₹3,750 |
| 1.09 | MS plate of 3mm thick and 36mm dia welded to leg of GI Charpoy pipe complete all as specified and directed by Engineer-in-Charge. | 400 | Each | 55 ₹22,000 | 30 ₹12,000 | 5 ₹2,000 Lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
22 Sept 2025, 6:00 pmClosed
GE (AF) Bamrauli
GE (AF) Bamrauli
REPAIR TO BED HARD STEEL (MAP) CHARPOY GI PIPE CHARPOY MS PIPE CHARPOY FOLDING STEEL AND OTHER MISC ITEMS ETC FOR OTM AND MD ACCN UNDER GE (AF) BAMRAULI
2025_MES_727132_1
8985/E8
Open Tender
Civil Works - Others
Works
180 days
GE (AF) Bamrauli
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE (AF) Bamrauli
₹80,000
Yes
4 Dec 2025
21 Aug 2025
24 Sept 2025
21 Aug 2025
22 Sept 2025
4 Sept 2025
Amount
Repair of under mentioned furniture items will be carried out as follows (Sl No 1.01 to 22.10 ):- (a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (Sl No 1.01 to 14.08 ) (b) Work will be executed where the furniture exist in different User Units of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge (Sl No 1.01 to 14.08):- (c) All Timber shall be of 1st class seasoned hard teak wood (Shegun/ Assam Teak ) free from knots and cracks else specified in drg. (Sl No 1.01 to 14.08):- (d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (Sl No 1.01 to 14.08):- (e) For wooden items:M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of complete existing polish making surfae smooth by sand paper (Emery paper) with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. There should be atleast one day gap in each step during polishing/painting .(Sl No 1.01 to 14.08):- where ever applicable ) (f): For steel items:- M&L for painting two coat of hammer Tone paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge.here should be atleast one day gap between every step of painting. Note: All material will be used to execute the work should be supplied by contractor in full no peacemeal material will be execpted.(Sl No 1.01 to 14.08):-where ever applicable)
Charpoy GI pipe ply top
12 mm thick plywood top BWP Grade (Make: Gold from Greenply/Gold from Archidply/ Club Prime from Century Ply) as per existing shape and size with shunken nut/bolts ,appropriate hole shall be made with elecrtic drill machine complete AND 12mm x 6mm thick teak wood beading half round along with the edges duly smoothened of the plywood and rounded at corner fixed with fevicol and headless nails all as directed by the Engineer-in-Charge.
MS Flat iron of size 40x5mm duly pinted with two coat of black colour synthetic enamel paint over a coat of red oxide primer to be fixed over the long rails equal to existing width of Charpoy including drilling holes suitably as directed by the Engineer-in-Charge..
Long rail of 32 mm dia Medium grade GI pipe including cutting and threading complete all as Specified and directed. (Make of Pipe: Tata/Jindal/JSL)
Replacement of unserviceable short rail from charpoy GI pipe 32mm bore but "except pipe" including cutting threading etc as required and directed. Note : Pipe shall be used from unserviceable long rail obtained from item No 1.04 here in before.
Replacement of unservicable legs from charpoy GI pipe 32mm dia but except pipe including cutting threading etc as required and MS plate of 3mm thick and 36mm dia welded to leg flat iron and clamp 02 Nos for MNF set duly painted with two coats of black paint complete all as specified and directed by Engineer-in-Charge. Note : Pipe obtained from ser item No 1.04 & 1.05 above shall be used for this items.
GI Elbow 3 way 32 mm dia medium grade ISI Marked complete all as specified and directed by Engineer-in-Charge.
Check nuts 32 mm dia complete all as specified and directed by Engineer-in-Charge.
MS plate of 3mm thick and 36mm dia welded to leg of GI Charpoy pipe complete all as specified and directed by Engineer-in-Charge.
Welding work wherever required as directed by Engineer-in-Charge.
Bed Hard Steel (FD/E6/MAP/08(R))
Material and labour for for in replacement of top of bed ply wood with 12 mm thick commercial plywood, BWP grade, ISI marked of (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) ply fixed on the top of bed plywood with screws fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete, all as specified and shown in drawing and as directed.
Material and labour for welding of broken joints of Bed Hard Steel including preparation of surface complete, rest all as shown on drg and directed.
Material and labour in reapir of head board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed.
Material and labour in reapir of foot board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing and directed.
Material and labour for for in replacement of Rubber shoe and new rubber shoe of size 25mm square to be fixed as per sample.
Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying powder coating as per specification in drg complete all as specified and directed.
Charpoy IP folding with Hard top (FD-388)
Material and labour for for in replacement of top of bed ply wood with 12 mm thick commercial plywood, BWP grade, ISI marked of (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) ply fixed on the top of bed plywood with screws fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts complete, all as specified and shown in drawing and as directed.
Material and labour for welding of broken joints of Charpoy IP folding with Hard top including preparation of surface complete, rest all as shown on drg and directed.
Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying two coats of black synthetic enamel paint over a coat of red oxide primer of approved quality complete all as specified and directed.
Charpoy IP Hard top (FD/MAP-II/01)
M&L for in replacement of plywood from Charpoy IP Hard top with new 12mm thick plywood top of size 1980mmx900mm BWP grade type ISI markded (Make:Kit ply/century ply/Archid ply) fixed with existing mild steel GI bolts of 6mm dia of suitable lengths including washers and nuts all as specified in drg and directed.
Material and labour for welding of broken joints of Charpoy or joining of points through welding including preparation of surface complete, rest all as shown on drg and directed.
Material and labour for preparation of old / new steel surfaces of any description by scrapping, rubbed down by emery paper and applying powder coating as per specification in drg complete all as specified and directed.
M& L for in replacement of Rubber shoe with new rubber shoe of size 25mm square to be fixed as per sampled .FD/MAP-II/01.of approved quality complete all as specified and directed.
Table Bed Side {FD/E6/MAP/15}
Taking out old unservicable ply from the back of table bed side and S&F new back with as per drg . Shade and texture natural teak as per existing table bed side and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed.
Taking out old unservicable pre-laminated board from the side of table bed side and S&F new back with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak as per existing table bed side) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed.
Taking out old unserviceable top of table bed side and S&F new top with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type Shade and texture natural teak as per existing table bed side) and 6 mm thick PVC edging all around the table top, complete, all as specified and shown in drawing and as directed.
Taking out old unserviceable powder coated telescopic channels of 1.6mm thick and S & F new powder coated telescopic channels of 1.6mm (Make: Hettich/Ebco/Quba/ Klazovyn) thick fitted in drawers complete all as specified and shown in drawing and directed.
Taking out old unserviceable drawers of table bed side and S&F new drawers shall be with 18/19 mm thick pre-laminated particle board (exterior grade), ISI marked, commercial type ( Shade and texture natural teak as per existing table bed side) and 4 mm thick half round first class teak wood edging all around the table top, complete, all as specified and shown in drawing and as directed.
Taking out old broken/ unserviceable handle from table bed side and S&F newe CP Handle 4" (Make: Hettich/Ebco/Quba/Klazovyn) as approved by GE in table bed side complete all as specified and shown in drawing and as directed.
Taking out old PVC edging to table bed side and S&F new PVC edging of 1.5mm thick fix in table bed side complete all as specified and shown in drawing and as directed.
M & L for welding of broken joints of Table bed side (MAP) including preparation of surface and powder coating paint all as specified and shown in drawing and directed.
Table Office Clerk Steel
Legs, as per drg
Lock of drawer as per drg (Make : Godrej/ Harisson/Link)
S& F to existing Drawers specified & as directed by Engr-in-Chg.
MS conduite any as per drg
PVC Shoes std quality all as per drg
Welding the joints of legs / square tube as per drg
Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Make: Action Tesa/Century Prowud from Century Ply/Green Panelmax from Geenply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging of Make-Rehau/ Pegasus /Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Material and labour for preparation of old / new painted steel surfaces (external and internal duly rubbing the whole almirah including intenally and existing old paint ) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty and primer wherever required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap between every step of painting.
Material and labour in replacement for box with drawer of table made of 1 mm thick MS black sheet including making shape, welded with gas welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour for in replacement of cushion for sofa set of size 560 mm X 530 mm X 100 mm thick, 40 density (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed.
Material and labour for in replacement of cushion for stool of dressing table ladies map as per drgh (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed.
Material and labour for in replacement of cushion of 40 density suitable for Chair easy as per drg (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed.
REPAIRS TO TEAPOY VERANDAH, FD-35 :-
Repair and replacement of UNSV top with new Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg.
Material and labour in replacement for centre stiffener with 19/20 mm conduit pipe of wall thickness 1.60 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for side stiffener with with 19/20 mm conduit pipe of wall thickness 1.60 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for leg of table with with 19/20 mm conduit pipe of wall thickness 1.6 mm including necessary cutting, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for hard rubber shoe of black colour as per existing as approved complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour for preparation of old / new painted steel surfaces (external and internal) and applying two coat of synthetic enamel paint by spray painting including preparation of surfaces and filling cavities with putty wherever required complete all as specified and directed by the Engineer-in-Charge.
REPAIRS TO CHAIR CB STEEL WITH ARM AND WITHOUT ARMS, FD-75 (M) :-
Material and labour in replacement for seat of chair CB steel with arms duly painted with two coats of synthetic enameled paint of black colour including weaving with 2mm wide 0.4 mm thick white plastic cane (Make : Ajay/premium/shah) as per Godrej pattern and fixed to chair frame with 04 Nos machine screw with washers of size 75mm x 3mm complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for Back of chair CB steel with arms duly painted with two coats of synthetic enameled paint of black colour including weaving with 2mm wide 0.4 mm thick white plastic cane (Make : Ajay/premium/shah) as per Godrej pattern with and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for seat of chair CB steel without arms duly painted with two coats of synthetic enameled paint of black colour including weaving with 2mm wide 0.4 mm thick white plastic cane (Make : Ajay/premium/shah) as per Godrej pattern and fixed to chair frame with 04 Nos machine screw with washers of size 75mm x 3mm complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for Back of chair CB steel without arms duly painted with two coats of synthetic enameled paint of black colour including weaving with 2mm wide 0.4 mm thick white plastic cane (Make : Ajay/premium/shah) as per Godrej pattern with and fixed with chair frame with 04 Nos machine screw with washers of size 75mmx 3mm complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for flat Iron stiffener of chair CB with arms of size 25mm x 3mm, 420mm long fixed to frame including necessary cuttings, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for flat Iron stiffener of chair CB without arms of size 25mm x 3mm, 380mm long fixed to frame including necessary cuttings, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for PVC cap of best quality for 20 mm dia conduit frame of chair CB steel complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for arm of chair CB steel including painted with two coats of synthetic enameled paint of black colour over a coat of red oxide primer complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Supply and fixing including preparation of glass top of 12 mm thick (Make: Modiguard/ Swastik/ saint gobain) webling through out the all sides of glassvarious sizes to fix at the existing tables. Rest all as directed by Engineer-in-Charge.
Supply and fixing of dressing mirror (Frame and looking mirror) of Table dressing gents (FD-379/ 230) as specified in drg. Rest all as directed by Engineer-in-Charge.
REPAIRS TO ALMIRAH LARGE STEEL (FD- 1031) :-
Material and labour in replacement for 6 lever lock of almirah large steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour for repair to door shutter with denting and necessary adjustment incl whole body denting and tighting as required complete all as specified and directed by the Engineer-in-Charge.
Material and labour in replacement for door shutter of almirah large steel made of 1.2 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for handle of almirah large steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for leg of almirah large steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for hinge of almirah large steel,mild steel, 100mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for shelf of almirah large steel made of 1.2mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for locking device three way as per drg complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
REPAIRS TO ALMIRAH MEDIUM STEEL WITH SHELVE, FD-67M
Material and labour in replacement for lock of almirah medium steel of Make : Harison, Godrej of suitable size with duplicate keys as per sample, fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour for repair to door shutter with denting and necessary adjustment incl whole body denting and tighting as required complete all as specified and directed by the Engineer-in-Charge.
Material and labour in replacement for door shutter of almirah medium steel made of 1.2 mm thick mild steel black sheet complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for handle of almirah medium steel chromium plated fixed with screws, complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for leg of almirah medium steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for hinge of almirah medium steel,mild steel, 75mm size of approved quality fixed with screws complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for shelf of almirah medium steel made of 1.2 mm thick mild steel black sheet including necessary cuttings, made to shape, welding etc. complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
Material and labour in replacement for locking device three way as per drg complete all as specified and shown in drawing and directed by the Engineer-in-Charge.
a) M&L for painting two coat of hammer Tone paint with shade as approved by EIC/GE over a coat of primer through spray machine , both internally & externally to the following furniture articles, viz F/FD/DB/MAP/TP series or similar items including removing of dust, dirts,dents etc and existing paint both internally & externally by applying paint remover/scrapping without damaging to surface , applying putty to level the surface before primer/painting, all as specified and shown on drgs and directed by Engineer-in-Charge. Note : here should be atleast one day gap between every step of painting.
Almirah Steel Medium/Small
Almirah Steel Large
Locker Steel
Teapoy Varandah
Table 3x2 with and w/o drawer
Rack Shoe steel
Table Bed Side (MAP)
Chair CB Steel with Arm/ Without Arms
Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.
UNIQUE FURNITURES SALES (BID ID -3432348)
Bharat Trading Company (BID ID -3421497)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .